OPT7 60in Triple LED Light Bar Install on 98 Sierra

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 40

  • @moses9263
    @moses9263 11 месяцев назад +1

    Will this work on a 2001 Chevy Silverado?

  • @stepsideaction8565
    @stepsideaction8565 Год назад +1

    This should work with a 93 c1500 Chevy stepside right

  • @edgartorres1883
    @edgartorres1883 3 года назад +1

    Ok so I’ve noticed that some trucks have two wires running down to the reverse taillight, how do I know which one I should splice it with? For my truck it’s green and black.

  • @dvazq6179
    @dvazq6179 2 года назад +1

    I may have a faulty led light cause I did the splice with the green wire for the reverse and it didn’t work. Every other function does tho.

    • @dvazq6179
      @dvazq6179 2 года назад

      97 Silverado.

    • @braleyneale5267
      @braleyneale5267 Год назад

      I believe that year range of Chevy trucks have 2 green wires, you may have wired it to the wrong one. A sure way to check is to use a voltmeter/wire probe tester. I have a 2000 Silverado, and mine has 2 green wires as well.

    • @kozmicflush980
      @kozmicflush980 Год назад

      Probably tapped the wrong wire.
      It's been 4 months, have you fixed it yet?

  • @amielohweenanay8313
    @amielohweenanay8313 3 года назад +1

    our car doesnt have the 4 pin flat socket. i plan to hard wire the product.
    the supply wires are as follows
    1. Ground
    2. Running light
    3. Brake
    4. Left turn
    5. Right Turn
    6. Reverse
    the product i bought has 5 terminals / wires ; 3 colors - red, amber, and white
    1. Ground
    2. Running light
    (red low beam)
    3. Left turn
    4. Right Turn
    5. Reverse
    i do not know where to connect the brake supply wire from the car to produce the high red beam

  • @mdmwelding3189
    @mdmwelding3189 Год назад +1

    Nice video ❤

  • @oscarpalacios6310
    @oscarpalacios6310 5 лет назад +4

    Anyone else notice that delay when he turns on his blinkers and break pedal ?

  • @vincentsanders3312
    @vincentsanders3312 3 года назад +1

    Thanks for the video

  • @k.anthonyrenford829
    @k.anthonyrenford829 6 лет назад +1

    I know trucks tail gates are flat and straight but does the bar bend or have any flexibility to it? Would like to know to maybe apply to a different vehicle.

    • @LonestarGarage
      @LonestarGarage  6 лет назад +1

      It doesn't have much bend to it, not enough to attempt putting it on something that isn't flat.

    • @HNiCDuke
      @HNiCDuke 5 лет назад

      This same company makes flexible light bars. I just installed on on a Yukon that had a curve under my hatch door.

  • @destinyislife2537
    @destinyislife2537 5 лет назад +2

    Did the light bar come with the splice kit and all the stuff in the box or did you buy those separate?

    • @LonestarGarage
      @LonestarGarage  5 лет назад +2

      It came with everything you saw in the video. I highly recommend it!!

    • @destinyislife2537
      @destinyislife2537 5 лет назад +2

      Lonestar Speed, thank you

  • @joeg.1119
    @joeg.1119 5 лет назад +3

    Upgrade ur entire truck lighting to leds u have leds with incodecent bulbs

    • @LonestarGarage
      @LonestarGarage  5 лет назад +1

      I have no idea what you're trying to say but ok???

    • @RUBV
      @RUBV 5 лет назад +4

      Lonestar Speed he is saying change your stock lights to led lights and it will look awesome but good job on install

    • @joeg.1119
      @joeg.1119 5 лет назад +4

      @@RUBV yes there u go thank you...

  • @mmf2988
    @mmf2988 4 года назад

    can you hold your foot on brake and use turn signal same time or does the signal light go out?

    • @LonestarGarage
      @LonestarGarage  4 года назад +1

      The turn signal stays on while on the brakes.

  • @juangaytan2437
    @juangaytan2437 5 лет назад

    what was tht tool called? the stick to grab the wire threw the tail light housing in the body

    • @LonestarGarage
      @LonestarGarage  5 лет назад +1

      I think is called a flexible grabber. Harbor freight or any auto parts store.

    • @juangaytan2437
      @juangaytan2437 5 лет назад

      thanks!

  • @jeanmarielambert1639
    @jeanmarielambert1639 5 лет назад +2

    Beau travail, l'ami. Merci pour la vidéo.

  • @scottesplin0395
    @scottesplin0395 4 года назад

    My truck won't start after I installed 3 harnesses to run 5 light bar what's wrong

    • @scottesplin0395
      @scottesplin0395 4 года назад

      What's wrong

    • @LonestarGarage
      @LonestarGarage  4 года назад

      I don't know. I didn't have an issue like that. Maybe you have a battery issue I'm not much help sorry.

  • @MrTexashugo
    @MrTexashugo 5 лет назад +2

    Still holding up ok?

  • @craigyarmulasr1845
    @craigyarmulasr1845 4 года назад

    Looks good. But amber is supposed to be in the front. Stay safe my friend.

    • @LonestarGarage
      @LonestarGarage  4 года назад +1

      Both colors are legal but if I could go back I would have put the all red one on the truck.

  • @tywanbrimage8388
    @tywanbrimage8388 6 лет назад

    How is that light bar holding up

    • @LonestarGarage
      @LonestarGarage  6 лет назад +1

      Holding up great I was driving behind that truck the other day, all the LED's are still bright and all the same color brightness! highly recommend it!!

    • @goodcitizentx
      @goodcitizentx 5 лет назад

      @@LonestarGarage is the running light color yellow or red? Looks great btw.

  • @psnewsauditor-az5244
    @psnewsauditor-az5244 4 года назад

    good ideo, use small level. get it 100 percent