I found a brand new vattera ascender f100 at my local hobby shop it’s the display model and I’m gonna hopefully buy it I’m just waiting for him to call me back. I’m excited
I painted with spry cans using a base of a clear metallic. Then the blue. As far as battery yes u could run it off the receiver which would draw power from the normal battery. The down fall is the light bar won't get full power so would remain dim. Hope that helps
You should try Atomik RC shock towers. It's a very cool product and gives you different options to choose where attach the top end of you shocks. Greeting from Italy 😉
Nice rig review. I use to use the 27t axials. Id burn one up and slap another in. The terrain where i run is creek beds, roots, muddy or dusty (depending on weather) hill climbs. I was going threw more motors than o thought i should be. Talked to some guys that recommend Holmes Hobbies Brxl esc and brushed motors. Havent looled back. Volts Up Gear Down. Running a 40t Torquemaster Expert on 3 or 4s depending on the location. I get all the torque i need out of that 40t, amd all the wheelspeed i need from running 3/4s lipo. I jad no idea what i was missing. Such smooth low end control. Been usimg Holmes for three years and haven't had any problems. Check em out.
Nice truck...FYI if you go to 4:58 on the video you will see that the tread patterns don't match. Not sure if that would affect anything on the trail. Again nice truck.
how's the articulation with that suspension, I'm so scared to go away from the stock shocks because I want the maximum suspension articulation as possible. Too stiff of a spring or shock and you have half the travel.
that is a nice truck I love it... what I notices and know about the king shocks is, they are fake piggy back shocks. I saw that because the Reservoir is just for the looks.. BUT!!!!; In all honesty the shocks and everything about your truck is sweet :)
sorry for all the questions, hopefully not too much of a pain. With the whole light bar and light kit setup, I know you said you put a different battery on it, is there a way to run it off the battery that runs the car, and what would the run time be, with the battery you have?
Can you tell me how you built your King shock ie oil weight and tips you may have to offer. I have built my 110mm King shocks about 4 times and they bind like crazy. Nice video Bro!
I’m having a tough time finding wheels for my ascender. I was looking into the gmade wheels because I’m building the new power wagon. They have a couple wheels that look somewhat proper for that truck. My question is, do you think those warn hubs would fit on those gmade rims?
it going to be my 1st rc ever I have made some stuff I think I have a vid of the stuff I made if not I will do a small vid on the stuff I have made for me rc
The turn rating refers to how many times the motor rotates. Ultimately the higher the turn rating the slower the motor as far as brushless goes. Hope that helps
Vaterra junk! Kidding. Just got a ascender bronco I'm gonna take a few parts off the honcho just to give the bronco a fair test although it is a bit shorter. Can't wait.
Love what you have done so far. The color is beautiful!!!!
I found a brand new vattera ascender f100 at my local hobby shop it’s the display model and I’m gonna hopefully buy it I’m just waiting for him to call me back. I’m excited
Great video. Want those rock sliders
I painted with spry cans using a base of a clear metallic. Then the blue. As far as battery yes u could run it off the receiver which would draw power from the normal battery. The down fall is the light bar won't get full power so would remain dim. Hope that helps
who is the company for the paint?
Great rc collection
that's all I owen this truck is just as good as the axile if not better love the underdog great truck
Beautiful truck! Getting ready to start building mine, thanks for the taillight trick tip!
Very nice truck! I love it! I love my Vaterra!
Great video man love my ascender
awesome rig man! looks amazing, love the K5 body, light bar and growlers. But the LR tire is on backwards.
I love the paint a wheels and tires
Hi, nice rig! Will put this body on a TRX4 chassis. What I realized, your left rear tire, is reversed! Look at the tread... 4:55 min
You should try Atomik RC shock towers. It's a very cool product and gives you different options to choose where attach the top end of you shocks. Greeting from Italy 😉
Great vids and nice truck keep it up
Nice truck u should put the Chevy suburban battery tray in your truck so u can run 5200 lipos that’s what I did with my K10
Good video! Nice truck!
Nice truck. One thing I noticed is your LR tire is on backwards
It's a color I mixed it's like an electric blue. I used brilliant blue and a clear metallic
so you used air brush to paint it?
awesome video man, keep it up!
Nice rig review. I use to use the 27t axials. Id burn one up and slap another in. The terrain where i run is creek beds, roots, muddy or dusty (depending on weather) hill climbs. I was going threw more motors than o thought i should be. Talked to some guys that recommend Holmes Hobbies Brxl esc and brushed motors. Havent looled back. Volts Up Gear Down. Running a 40t Torquemaster Expert on 3 or 4s depending on the location. I get all the torque i need out of that 40t, amd all the wheelspeed i need from running 3/4s lipo.
I jad no idea what i was missing. Such smooth low end control.
Been usimg Holmes for three years and haven't had any problems. Check em out.
Nice truck...FYI if you go to 4:58 on the video you will see that the tread patterns don't match. Not sure if that would affect anything on the trail. Again nice truck.
Nice video, thanks for the info!
It's not bad. I'm gonna put a softer weight oil in them so I get better movement
what weight oil did you use?
Thank you so much Theo
I'm getting one just have 2 wait in tell the 27 then I will be doing an open on it before I run it
Nice rig review. Thumbs-up
Nice build!
Wow thank you sir that means a lot coming from you!! I'm a big fan
good looking k5
how's the articulation with that suspension, I'm so scared to go away from the stock shocks because I want the maximum suspension articulation as possible. Too stiff of a spring or shock and you have half the travel.
Yes the bumper is from RC4WD and it's made for the ascender
Bernoulli RC
super dually RC
where did you get that cool trailer in the back, I wonder get one for my boat
Cristian Moreno that trailer was hand made by a friend of mine now I have a better one you'll see in some upcoming vids!!
i have one and to be onest its so graet only thing i did was get a tekin system Install , still have stock shocks evriting .
that is a nice truck I love it... what I notices and know about the king shocks is, they are fake piggy back shocks. I saw that because the Reservoir is just for the looks.. BUT!!!!; In all honesty the shocks and everything about your truck is sweet :)
sorry for all the questions, hopefully not too much of a pain. With the whole light bar and light kit setup, I know you said you put a different battery on it, is there a way to run it off the battery that runs the car, and what would the run time be, with the battery you have?
How do u like the king shocks did u have to use any spacers for your shocks ?
Can you tell me how you built your King shock ie oil weight and tips you may have to offer. I have built my 110mm King shocks about 4 times and they bind like crazy. Nice video Bro!
I’m having a tough time finding wheels for my ascender. I was looking into the gmade wheels because I’m building the new power wagon. They have a couple wheels that look somewhat proper for that truck. My question is, do you think those warn hubs would fit on those gmade rims?
Back driver side tire is back wards
Have you done a build non any of the Gelande products? specifically the defender 90 or 110?
you should make some tire chains so you can run it in the snow
Do u have any issues with your venterra ascender turning wise from left to. Right mine turns sharper one way then the other do u know why this is ?
Sick looking rig. What colour is that?
Hi Ryan I also love my Assender do you still have yours?…
police lights on the way. decals being made. body ready to paint. Stranger Things deputy blazer. can't wait.
also what paint did you use for this truck?
Thanks
it going to be my 1st rc ever I have made some stuff I think I have a vid of the stuff I made if not I will do a small vid on the stuff I have made for me rc
I will like to buy it iam looking for one like that. We're can I get it??
At the beginning of the video up in the top right. What kind of body is the full blue one?
Logan McDonell that's a Vaterra F100 body
RELENTLESS RC thanks
okay how much was all of this
Not to be that guy but it actually is 4 link in the front it's just a pan hard set up. But other then that enjoyed the video.
when choosing a motor what does the "turn" rating mean???
The turn rating refers to how many times the motor rotates. Ultimately the higher the turn rating the slower the motor as far as brushless goes. Hope that helps
Did the front bumper bolt rite on
dominique broussard yes it bots right up i have one on mine.
That's a savox 1210sg not w.e you said ..just clarifying don't want any mix ups on that one
It's Electric blue
where in Wisconsin?
cwachtl mukwonago
jfr park member facebook?
cwachtl yes SIR Jamie is a good friend of mine. Find me or Relentless RC on FB
cwachtl I know who u are Chad
facebook connect chad wachtl
Oh my bad thanks
Vaterra junk! Kidding. Just got a ascender bronco I'm gonna take a few parts off the honcho just to give the bronco a fair test although it is a bit shorter. Can't wait.
tires backwards
Check out my Ascender video with Smoking exhaust!