Did I hear that wrong or is there some reason to plug 1 into 2 and 2 into 1 between the USB adapter and the receiver? I plugged all 3 channels of the USB adapter I got on ebay into their respective channels and everything worked fine for me, including using channel 3 for marshalling. What took me a while to figure out was that you have to have the axis you want to use already activated before you click in the field you want to assign it to when trying to configure the controller. Felt very counterintuitive to me. To clarify that a little, steer left on the controller, and while holding it, click on the steer left field in the controller config screen in VRC. Hope maybe this helps someone feeling similarly daft about the controller config. 😉👍
Hold IFMAR sanctioned events for 2020 on VRC-Pro please, was looking forward to Brazil, until CV-19 cancelations etc, p,ease have the Pros compete on the virtual platform this year, so us fans can still see the Races 👍🐻🇨🇦
That's a silly high number already, I would use software like RivaTuner to cap the fps to say 120 or 144 depending on your screen, so you're not wasting a few hundred Watts of heat. I doubt there is any gameplay benefit over 120+fps.
@@BrunoCoelhoRC I have the same adapter as your (blue one) but the channel 1 on the adapter is steering, just like the receiver....but I've got it. i have tried to setup 2 to 1 and 1 to 2 and it won't work....my steering controlling throttle on VRC that is not right. I guess your adapter is some kinda odd. Thanks for the feed back.
Hummm...Ok. All friends I have they need to use 2 and 1. Maybe some mistake on the fabrication. But don't worry as soon as your calibration is correct and on the game you get 100% all things it's great. 😉
Olá, Bruno! Estou tendo problemas em rodar o game, a versão baixada do site deles e não da steam... De início, o jogo não saía dos 10 fps, aí instalei manualmente uma versão do C++ 64 bits, e melhorou para 30 fps... Mas não importa o que eu faça com o Vsync, só obtenho 30 fps (38fps, pra ser exato). Minha máquina é boa, Ryzen 5 1600, 16 de ram, Geforce 1060... Parece que sou só eu e tenho medo de comprar no steam e ser a mesma coisa.
Boas Rod! Já experimentaste desinstalar e instalar de novo? Nunca ouvi falar desse problema e eu tenho uma configuração de PC semelhante a tua. Tenta expor o teu problema no grupo de VRC do facebook. Abraço
Hi, I hope you have fixed the problem, but in case it can help other people : when you enable V-Sync, it actually limit/lock your in game FPS to match your display refresh rate, so it will be locked on what you set in Windows settings for your display. I you set your display on 30Hz, the V-Sync will lock the game on 30FPS, if you set it in Windows on 60 or 120Hz, V-Sync will lock the game on 60 or 120FPS. It's the main thing that can lock V-Sync in low value. If it doesn't work, it may be a bug but like Bruno said, I also didn't hear someone experiencing this bug. Note : when you have V-Sync, GPU and CPU don't work on higher rate, so both get lower usage and temperature.
Thanks for the video 😎👍 I know a lot of people are having trouble with this. Especially calibrating the controller.
Could you share your cars setting? Thx.
Olá Bruno boa tarde
Tudo bem..
Vi a tua corrida na África do sul
Boa vitória 💪👏
Ola bruno queriA que me desses uma dica acerca do melhor set up para pinhao e coroa do rx8e ru estou a usar o motor 2600kv com 4s LiPo? Obrigado
Did I hear that wrong or is there some reason to plug 1 into 2 and 2 into 1 between the USB adapter and the receiver? I plugged all 3 channels of the USB adapter I got on ebay into their respective channels and everything worked fine for me, including using channel 3 for marshalling. What took me a while to figure out was that you have to have the axis you want to use already activated before you click in the field you want to assign it to when trying to configure the controller. Felt very counterintuitive to me. To clarify that a little, steer left on the controller, and while holding it, click on the steer left field in the controller config screen in VRC. Hope maybe this helps someone feeling similarly daft about the controller config. 😉👍
boas Bruno onde posso comprar esse adaptador?
Groosoooooo !!!!! SPEED PARADISE ARGENTINA 2012 !!!! now it's different
I think I got it sorted, receiver not compatible - used new RX482 = HAPPY CHAPPIE. great channel, recent subscriber, v impressed. thanks BC
devias fazer mais videos de tu a correres no vrc e dos teus carros(verdadeiros) :D
can you maybe help me i can't participate in multiplayer sessions anymore. I always get the error code 1002
Hold IFMAR sanctioned events for 2020 on VRC-Pro please, was looking forward to Brazil, until CV-19 cancelations etc, p,ease have the Pros compete on the virtual platform this year, so us fans can still see the Races 👍🐻🇨🇦
Hi Bruno, how do you get your (fps) so high? Mine only ranges between 300-400 fps. Thanks
That's a silly high number already, I would use software like RivaTuner to cap the fps to say 120 or 144 depending on your screen, so you're not wasting a few hundred Watts of heat. I doubt there is any gameplay benefit over 120+fps.
I might be wrong but why would you want to connect channel 1 on the adapter to the channel 2 on your receiver..and vise versa #2 to #1 on receiver...?
Hello, Because the Chanel 1 on the receiver is the steering and on the adapter, the channel 1 is the throttle.
@@BrunoCoelhoRC I have the same adapter as your (blue one) but the channel 1 on the adapter is steering, just like the receiver....but I've got it. i have tried to setup 2 to 1 and 1 to 2 and it won't work....my steering controlling throttle on VRC that is not right. I guess your adapter is some kinda odd. Thanks for the feed back.
Hummm...Ok. All friends I have they need to use 2 and 1. Maybe some mistake on the fabrication. But don't worry as soon as your calibration is correct and on the game you get 100% all things it's great. 😉
@@BrunoCoelhoRC Bruno, L'importante è che funzioni!!! ;)
"Customize" will auto detect signal and assign proper button. Use that feature and it does not matter the order of the wires.
Thank you.
thanks bro !
Olá, Bruno! Estou tendo problemas em rodar o game, a versão baixada do site deles e não da steam... De início, o jogo não saía dos 10 fps, aí instalei manualmente uma versão do C++ 64 bits, e melhorou para 30 fps... Mas não importa o que eu faça com o Vsync, só obtenho 30 fps (38fps, pra ser exato). Minha máquina é boa, Ryzen 5 1600, 16 de ram, Geforce 1060... Parece que sou só eu e tenho medo de comprar no steam e ser a mesma coisa.
Boas Rod! Já experimentaste desinstalar e instalar de novo? Nunca ouvi falar desse problema e eu tenho uma configuração de PC semelhante a tua. Tenta expor o teu problema no grupo de VRC do facebook. Abraço
@@BrunoCoelhoRC Sim, fiz isso. Fui premiado!
Ok. Infelizmente, esse jogo não me quer. Desisti. Obrigado pela ajuda.
Mas postou algo no grupo do VRC do Facebook? Tenta la, não desistas ja.
Hi, I hope you have fixed the problem, but in case it can help other people : when you enable V-Sync, it actually limit/lock your in game FPS to match your display refresh rate, so it will be locked on what you set in Windows settings for your display.
I you set your display on 30Hz, the V-Sync will lock the game on 30FPS, if you set it in Windows on 60 or 120Hz, V-Sync will lock the game on 60 or 120FPS.
It's the main thing that can lock V-Sync in low value. If it doesn't work, it may be a bug but like Bruno said, I also didn't hear someone experiencing this bug.
Note : when you have V-Sync, GPU and CPU don't work on higher rate, so both get lower usage and temperature.
Eu sou de Santarém
Tenho alguns carros rc mas não prático competição
Muito bom devias era falar em português
🖒😎
I didn’t feel like it was worth it