Это видео недоступно.
Сожалеем об этом.

Guillows RC Conversion Motor & Electronics

Поделиться
HTML-код
  • Опубликовано: 17 авг 2024
  • Guillows RC Conversion Motor & Electronics
    In this video I'll discuss my recommendations for Guillows RC conversion motor and electronics. I'll offer detailed information on what works to power and control the six Guillow model airplane kits that I have converted to RC flight.
    There is a wide range of Guillows motor and electronics than can be used in these conversions. For the smaller models, weight is critical. For the larger models, you can use regular RC components.
    Guillows model airplane kits made wonderful RC models if you follow a few careful steps, discussed in the video. I will also highlight my RC conversion of the Guillows Aeronca, Zero and F6F Hellcat.
    Here is a link to my RUclips Channel:
    / timmckay56
    Many thanks in advance for a post of this video on Facebook, it truly helps the channel a lot!
    Regards,
    Tim
    Light Guillows models (weight under 3 ounces), Series 300, 600 and 600:
    Use ParkZone micro electronic systems: • Park Zone Ultra Micro ...
    Medium weight kits (WW2 fighters), Series 400:
    Suppo A1504 electric motor (www.AltitudeHobbies.com)
    Spektrum AR620 receiver
    Castle Talon 15 ESC
    Hitec 40 servos
    ThunderPower 2 cell lipo 325
    Guillows Giant scale kits, Series 1000 (12 ounce weight)
    E-flite Park 370 motor
    Spektrum AR620 receiver
    Castle Talon 15 ESC
    Hitec 55 servos
    ThunderPower 2 cell lipo 325
    Chapters
    00:00 - Intro
    00:46 - Guillow flights
    02:00 - Guillow model classes
    03:20 - Power and control systems
    07:35 - Center of Gravity
    08:45 - Guillows catalog
    11:13 - Rudy episode : )

Комментарии • 41

  • @bradleygrigsby5884
    @bradleygrigsby5884 3 года назад +4

    Thank you Tim for such great info. Us old gas guys still have trouble converting planes to electric. You’ve given me a great starting point to go with.

    • @TimMcKay56
      @TimMcKay56  3 года назад +2

      Bradley: Glad to help! Tim

  • @stevejones9044
    @stevejones9044 19 часов назад

    Ok I'm inspired by you and just ordered the F6F Guillows kit. I will be doing the RC conversion. Keep these conversions coming! Love the vids

    • @TimMcKay56
      @TimMcKay56  19 часов назад

      Steve: Good luck and thanks for checking in!

  • @stanpotter7764
    @stanpotter7764 3 года назад +1

    Another informative, well-produced video! 👏

    • @TimMcKay56
      @TimMcKay56  3 года назад

      Stan: Glad you enjoyed it! Tim

  • @thomasdavis1210
    @thomasdavis1210 2 года назад +1

    I just completed the Guillows SBD kit. I went with the Park 370 and electronics you recommended. I covered it with tissue and clear coated it. I haven't flown it yet because I lost the canopy but I ordered a replacement. Its light and strong. I just started the Hellcat and I'll use the same running gear. Thank you for making great videos.

    • @TimMcKay56
      @TimMcKay56  2 года назад

      Thomas: Best of luck with your test flights! Tim

  • @funscalemodels9782
    @funscalemodels9782 3 года назад +1

    Very nice video Tim. And was cool to see Rudy too!

    • @TimMcKay56
      @TimMcKay56  3 года назад

      FSM: Thanks for your feedback! Tim

  • @kenkingsflyingmachines2382
    @kenkingsflyingmachines2382 11 месяцев назад +1

    Yeah, your planes are awesome, but Rudy was the real star!

    • @TimMcKay56
      @TimMcKay56  11 месяцев назад

      Got that right! Tim

  • @Ciiads
    @Ciiads 2 года назад +1

    Great info.❤️😊👍

    • @TimMcKay56
      @TimMcKay56  2 года назад +1

      Aneeshmurali: Thanks for watching! Tim

  • @davidquerry8869
    @davidquerry8869 3 года назад +3

    Just loved this video Tim. Now your talking my language. Is the PBY, or a DC 3 on your to do list? Pleeeaaase.

    • @TimMcKay56
      @TimMcKay56  3 года назад

      David: You never know! Tim

  • @artherr2843
    @artherr2843 3 года назад

    Pray that you will do more on RC conversion video

    • @TimMcKay56
      @TimMcKay56  3 года назад +1

      Art: No worries, I am on it. Just test flew my re-motored Guillow Zero model today. Flew great, video out on Jan 10th! Tim

  • @ezragonzalez8936
    @ezragonzalez8936 2 года назад

    Its pronounced willows I have started 5 models never actually finishing any of them ha. Thanks for your sue advice!

  • @georgejunior895
    @georgejunior895 3 года назад

    Tim. Thank you for these great videos, they are very helpful and informative. I tried to follow your example and do an rc conversion on a guillow javelin twice the first one I got tired of waiting for the electronics to arrive so I tried hooking up the battery and it flew out of sight. The second one I was trying to install the receiver and the plane crumbled. I'm not sure if I want to try another one because I've tried 11 models and it was the same. If I do, should I try another javelin or something else?

    • @TimMcKay56
      @TimMcKay56  3 года назад

      George: Maybe try another project . . . Guillows kits can be tricky. www.StevensAero.com has some fantastic smaller flyers that go together just great. Tim

  • @JohnDoe-qb6yh
    @JohnDoe-qb6yh 2 года назад

    6.4 ounces for the smaller p40 warhawk is too nuch right? What motor could make that fly?

    • @TimMcKay56
      @TimMcKay56  2 года назад +1

      John: 6.4 ounces is asking a lot for the P-40 . . . do keep your speed up! Not sure on the electric motor, perhaps check www.HorizonHobby.com and look for the smaller E-flite park motors. Tim

  • @xAbsoluteDarkx
    @xAbsoluteDarkx 3 года назад +1

    what about series 900?? can it be Conversion? thanks great video btw

    • @TimMcKay56
      @TimMcKay56  3 года назад +1

      900 Series kits are possible, but there are small models, you will need super light electronics. Tim

  • @clementgoetke2385
    @clementgoetke2385 3 года назад +1

    tim i love your videos but you need to record at a higher volume !

  • @stephengould1982
    @stephengould1982 2 года назад +1

    Does the 16.5 inch hell cat make a good RC conversion or is it to small?

    • @TimMcKay56
      @TimMcKay56  2 года назад +1

      Stephen: In my book, model is just too small for a good RC conversion. Tim

  • @TheJungleboy2123
    @TheJungleboy2123 3 года назад

    Hey Tim, Great video as always! I have always wondered the what is best way to hinge the ailerons on these? Some people swear by the micro hinges, other people swear by tape (like du-bro hinge tape). The tape you used seemed to work well. Does it hold up long term?

    • @TimMcKay56
      @TimMcKay56  3 года назад

      Dan: I use regular clear Scotch tape. Practically invisible, seals to iron on covering very well. Seems to last! Tim

  • @danielzarwell9318
    @danielzarwell9318 2 года назад +1

    What covering do you use? Thank you

    • @TimMcKay56
      @TimMcKay56  2 года назад +1

      Daniel: I use any of the lightweight iron-on coverings. These usually have the word "Lite" in then, such as ParkLite or AeroLite. Horizon Hobby or www.StevensAero.com usually carry these. Tim

  • @prod.mp3861
    @prod.mp3861 3 года назад

    how does the Talon 15-Amp 17V ESC w/8-Amp BEC handle the Thunder Power 325mAh 2-Cell/2S 7.4V Rampage Series 70C LiPo even though the average current of the battery is 22.75?

    • @TimMcKay56
      @TimMcKay56  3 года назад

      Prod: To be honest with you, I really do not go into the level of technical research. Above my mental capabilities. 😁 I experiment a bit, and have found the Talon 15 seems to work well with a variety of 2 cell lipo packs if I keep flight times under five minutes of so. Tim

  • @sudhaseshasayee7945
    @sudhaseshasayee7945 3 года назад

    Sir can you suggest me an alternative for foambord as I don't get it here in India

    • @TimMcKay56
      @TimMcKay56  3 года назад +1

      Sudha: While I cannot vouch for your local shopping area, here in the US various home building supply and art supply stores have a range of foam products (building insulation, for example) that can be adapted to RC flight. An amount of rigidity/stiffness and light weight are the key items. Tim

    • @sudhaseshasayee7945
      @sudhaseshasayee7945 3 года назад

      @@TimMcKay56 ok I'll think about it thanks for your time and advice... People like you really help me