Thanks so much for this. Very clear and straight forward. I needed to remove the side panel, and maybe it might've been possible without removing the front bumper, but without knowing for sure and following your video I was able to take off the bumper and then remove the side panel pretty easily. Thanks again.
Hi, I have a 308 SW 92CV FAP 04/2011, and your support was helpfull (with some little dispcrepancies). Thanks Bonjour, j'ai une 308 SW 92CV FAP 04/2011, et ton aide a ete tres utile (avec quelques petites differences). Merci
Wow, quite a lot of screws to be removed before the front bumper could comes out. Could this be the same for Peugeot 308CC made in year 2009? I need to replace the leaking radiator and likely I needed to remove the front bumper before I can access the radiator.
Muy buen vídeo y bien explicado ,paso a paso, gracias a el he podido desmontar el paragolpe. Para desengancharlos de la aleta ,ademas de quitar el tornillo 5´20´´hay que tirar sin miedo.
Très bonne vidéo bravo à vous et merci de ce partage.Je dois faire la même chose mais pour remplacer la grille centrale et le bandeau.J aurais aimer savoir comment faire
Hello everyone I have Peugeot 308 2009 model bumper was broken and along with bumper silver panel which you can see on the vedio behind the bumper silver panel in bend do you know about if is bend then what should i do or doesn’t effect ??someone is sold me like that i could not see before buy now I’m worried about because they have been replaced bumper Plz answer me thanks And plz stay home and save live and your self
is it possible to only detact the front grill, or is it accessible only after taking off the whole bumper unit? i am planning on installing extra lights behind the grill.
Pro mechanics tip- hire a five year old to do the headlight replacement. or an octopus. Cause, if youre a normal human, those fingers aint going in! I dropped a bulb into the headlight compartment, so, off comes the bumper to get to the light, to get to the bulb. Damn you Peugeot engineers! Merde!
Please visit and ask any questions through the website www.diagnostic-world.com/
Dude, is the 2011 bumper (with leds) compatible with the 2009 model? is it possible to mount it ?
Ertyyu
Have you found the answer mate?
Thanks so much for this. Very clear and straight forward. I needed to remove the side panel, and maybe it might've been possible without removing the front bumper, but without knowing for sure and following your video I was able to take off the bumper and then remove the side panel pretty easily. Thanks again.
Thanks for this very helpful guide, I like these detailed step-by-step instructions 👍👍👍
Класс!!! Просто и элементарно, без лишних слов. Молодцы!!!
Very good informative video, made it seem easier then I thought it was going to be 👌
Excellent step-by-step video. Thanks very much
Franchement la vidéo est bien filmé et les détails je pense qu il ne peut faire plus détaillé bravo à vous.
Well done, I have to take it off these days. Thanks for your help...
Many thanks for sharing this video, i have to replace a front headlamp and your video will be very helpful. 👍🏼
Vidéo super top ! vraiment bien filmé, merci beaucoup en tout cas.👍
Hi, I have a 308 SW 92CV FAP 04/2011, and your support was helpfull (with some little dispcrepancies). Thanks
Bonjour, j'ai une 308 SW 92CV FAP 04/2011, et ton aide a ete tres utile (avec quelques petites differences). Merci
beautiful video,thanks for your generosity.
Thank you for this video! I was wondering if it was the same way to remove a front bumper from a 207 CC ??
Thank you guys.
Yes it is the same process for the Peugeot 207 CC to take off the front bumper
Bonjour. merci enormement pour ces videos concernant la 308 ca ma bien aider
it's the same for any face-lift Peugeot. but when you have to use a torx bit. actually use one. don't ever force a Allan key bit in there.
J'ai la même et je l'adore !
Do you know if the headlight or that 308 is the same of the 207 compact? Looks like be the same
Thanks 😁 it was very helpfull !
Thank you
Very usefull vidéo....
Thank you great help..👍😃
Is it same thing in Peugeot 307 face lift model? (2006)
Wow, quite a lot of screws to be removed before the front bumper could comes out. Could this be the same for Peugeot 308CC made in year 2009? I need to replace the leaking radiator and likely I needed to remove the front bumper before I can access the radiator.
Hi mate can you please also post a video on how to remove rear bumper on peugeot 308.
Muy buen vídeo y bien explicado ,paso a paso, gracias a el he podido desmontar el paragolpe. Para desengancharlos de la aleta ,ademas de quitar el tornillo 5´20´´hay que tirar sin miedo.
Très bonne vidéo bravo à vous et merci de ce partage.Je dois faire la même chose mais pour remplacer la grille centrale et le bandeau.J aurais aimer savoir comment faire
EXCELENTE!!fELICITACIONES,MUY BUEN MAESTRO,GRACIAS!!!eL 408 DEBE SER LO MISMO!
Have you got a video for removing the rear bumper of the Peugeot 308
Hello everyone I have Peugeot 308 2009 model bumper was broken and along with bumper silver panel which you can see on the vedio behind the bumper silver panel in bend do you know about if is bend then what should i do or doesn’t effect ??someone is sold me like that i could not see before buy now I’m worried about because they have been replaced bumper
Plz answer me thanks
And plz stay home and save live and your self
hace falta quitar todo eso para sustituir el radiador? buen video
is it possible to only detact the front grill, or is it accessible only after taking off the whole bumper unit? i am planning on installing extra lights behind the grill.
Hey it’s been a while , do you remember what you done ?
Yeah I removed the bumper and installed extra lights behind it.
Super bien expliquer .. grand merci ..
Can we just replace the part with grill without removing the entire part ?
How many times it takes to remove the bumper ?
Merci beaucoup
Nice. Thanks🎉
Do you also have a video about removing the rear bumper of 308?
Thanks for the video
Merci beaucoup de france !
Du bist Meister. Viel danke. Wie ich kann klepn die leichte.
Good job.
Use electric screwdriver 😉
you sir, are awesome!
floak18
great vid...very usefull
I like your video because no talkaktif👍
Does anyone know if the bumper from lifted version will fit into non lifted car?
Have you found the answer? I need to know too.
@@darkwolf670000 still waiting
thanks bro
Thank you bro
Same as 207?
thank you
ótimo vídeo parabéns
thank you!!^^
pour la 208 si possible
merci bcp!
Good
very good.
Pro mechanics tip- hire a five year old to do the headlight replacement. or an octopus. Cause, if youre a normal human, those fingers aint going in! I dropped a bulb into the headlight compartment, so, off comes the bumper to get to the light, to get to the bulb. Damn you Peugeot engineers! Merde!
bueno no se cambiar el fisible del encendedor me alludas
Pevacica zora paunovic tv istok
Thank you genius
Este no es un peugeot 308, creo que es un 207. saludos
a full el sonido de las palomas
Mandou bem heim maninho!
Nooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo😭😭😭😭😭😭😭😭😭😭😨😨😨😨😥😥😥
Thank you