Anthony A. Watch my new video, for traverse front evaporator core replacement. Some one asking why is this easy way? Here' s my opinion. This is the easiest way, to the professional GM technician.
Wow .. this thing is complicated as hell! Great job bro. I have a question, is there any reliable evaporator brand for this model? I replaced mine with an OEM but this one broke as well, I know this model has a manufacturer defect. Thank you
Manuelito Aquino. Sir madali tanggalin pag buong dashboard, camaro 2011- 2014 parihas lng. Kailangan mo rin baklasain yung windshields glass. Kasi may dalawang bolt na mahaba.
Only an insane company would come up with this design. Nothing would be wrong with the design if quality parts would have been used but GM never lets their customers down. This is a 3K repair and so NO thanks.
More The Freon!!! And Super Thin Core Walls For Better Heat Transfer!!! And All Car's Have Similar Dash Construction!!! A LOT Of Stuff Goes Behind The Dash!!! A LOT Of Stuff!!! Let's See Your Design!!! 😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Spahi77, Sir If the time will come to your silverado with the same problem in this video, trust the dealer GM technician like me, we care about your car.
@@ejmegzcarvlog7226 you are not like other GM dealer mechanics a lot of them would charge $2000 on average for a repair like this. This is a horrendous modern design, but I give you props for caring about your customers.
Next time leave the dash on the seats and just remove the hvac case. Don’t need another person to help you carry it out and possibly damage the dash/carrier. Or door panel. Or hurt your self.
So I think my 2016 Chevy 1500 is leaking in the same exact place. I have taken my expansion valve off a few time replaced the o rings on it even replaced the expansion valve with no luck I know it’s leaking in the area because I can spray soapy water around the plastic housing around the expansion valve and nothing but bubbles around the expansion valve.
Justin Siemiatkoski I dont think that the bubbles around the expansion valve is enough to determine that your chevy is the same leaking in this video. Front evap core leaking on Tahoe and yukon is not a common issue. Much better you check the 3 common A/c leaking tahoe and yukon. First a/c condenser, I have had a video on replacing A/c condenser and the video showing where is the leaking. Second AC discharge hose at compressor and the 3 is rear evap lower side, you can visually check at rear side near at exhaust pipe.
@@zairacabadas853 The cost that I giving to you is from saudi riyal currency then I converted in to US$. So its different from your country the cost for per hour.
Use 10mm combination ratcheting wrench and then put a wire in the wrench. My hand is to small i can able to remove the bolt with out removing the manifold
Like a rubics cube the worst the music doesn't make it any easier and to put it all back like it was the worst most mechanics won't do the job they say take it somewhere else and it's several thousands 4 or 5 easy the worst
@@ejmegzcarvlog7226 I am aware to a certain degree of how manufacturers have ILL designs on many of their vehicles, but looks like (G)REEDY (M)OTORS leads the way. Thanks
I’m watching the video still waiting for “the easy way” lol. Very nice work! Clean and professional.
Anthony A. Watch my new video, for traverse front evaporator core replacement. Some one asking why is this easy way? Here' s my opinion. This is the easiest way, to the professional GM technician.
Wow! Just Wow! You deserve a raise my man! Such patience!
Awesome video bro! I just did this replacement watching your video step by step and your a life saver! Good work! Saved me 3k!
Thanks a lot bro. I'm doing an evap core on a 14 silverado this video was a lifesaver
Spencer Knight, Bro Thank you also, and please support my RUclips.
@spencer I just found a leak in my evap coil. Have you replaced it yet?
I have 2017 sliverado
@@Jaysaucedait is said that Spencer is still dismantling the Silverado till this day
The worst
Me gustó mucho 😊
GM changed layout in 88. Older evaporator took an hour to remove and replace under hood
Yes, your correct. But not just a GM, as well as other dealer.
Nice video! Looks almost exactly the same as the 07-14 GMC Chevrolet Tahoe Yukon remove and replace required for heater core..
@@morecowbell235 Thanks for the comment.
Awsome video, Your a master at your Profession.
This is reason #174 why I gave up on GM....GM,you couldn’t of left evap coil under the hood....really??
Wow .. this thing is complicated as hell! Great job bro.
I have a question, is there any reliable evaporator brand for this model? I replaced mine with an OEM but this one broke as well, I know this model has a manufacturer defect. Thank you
Im sorry bro, i have no idea for reliable brand. Dealer always recommend a original brand.
Good work
hello james your work is impressive.
where is your workplace.
Shabbir Hussain. Here in Universal Motor agencies. Riyadh KSA main branch
@@ejmegzcarvlog7226
Dear can i have the location of the work Shope ? Your mobile Number as well .
My number is 0504440928. Thanks in advance
pareho lng ba eto sa camaro sir na easyway pangtanggal ng buo kasi pakabit nayung video sa dashbord na pag tanggal mo.. sana masagot thanks god bless
Manuelito Aquino. Sir madali tanggalin pag buong dashboard, camaro 2011- 2014 parihas lng. Kailangan mo rin baklasain yung windshields glass. Kasi may dalawang bolt na mahaba.
Only an insane company would come up with this design. Nothing would be wrong with the design if quality parts would have been used but GM never lets their customers down. This is a 3K repair and so NO thanks.
Common among other brands as well, no escape.
More The Freon!!! And Super Thin Core Walls For Better Heat Transfer!!!
And All Car's Have Similar Dash Construction!!! A LOT Of Stuff Goes Behind The Dash!!! A LOT Of Stuff!!! Let's See Your Design!!! 😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Thank you my dear , pefect job
Can the heater core be changed in place or is it nessesary to take ac lines apart and completely remove box?
how much time did really take it to do it? , Ondemand say about 14 hrs
Felix Martin. In my own experience, I can removed the evaporator in 3 hours. Removing only. Thanks for your comment
I hope my silverado never has this problem.....holy moly what a disaster!. WHY GM, WHY?
Spahi77, Sir If the time will come to your silverado with the same problem in this video, trust the dealer GM technician like me, we care about your car.
@@ejmegzcarvlog7226 you are not like other GM dealer mechanics a lot of them would charge $2000 on average for a repair like this. This is a horrendous modern design, but I give you props for caring about your customers.
@@ejmegzcarvlog7226 if I ha the pleasure of getting a GM tech like you I wouldnt worry about it, but here in USA, GM techs can't tie their shoes
Next time leave the dash on the seats and just remove the hvac case. Don’t need another person to help you carry it out and possibly damage the dash/carrier. Or door panel. Or hurt your self.
Lol how long the new one is going to last tho? Other 5 year?
What's the name of the orange/ red removal tool?
Car trim removal tool kit
It’s time to switch over the electric ratchets so you don’t have to drag that dirty air hose across the interior
@@nickhyslop5743 Yes, thats correct. I would try to suggest to my employer.
So I think my 2016 Chevy 1500 is leaking in the same exact place. I have taken my expansion valve off a few time replaced the o rings on it even replaced the expansion valve with no luck I know it’s leaking in the area because I can spray soapy water around the plastic housing around the expansion valve and nothing but bubbles around the expansion valve.
Justin Siemiatkoski I dont think that the bubbles around the expansion valve is enough to determine that your chevy is the same leaking in this video. Front evap core leaking on Tahoe and yukon is not a common issue. Much better you check the 3 common A/c leaking tahoe and yukon. First a/c condenser, I have had a video on replacing A/c condenser and the video showing where is the leaking. Second AC discharge hose at compressor and the 3 is rear evap lower side, you can visually check at rear side near at exhaust pipe.
@@ejmegzcarvlog7226 is not the Schrader valve on the high side the most common weakness?
What a nightmare!! I’d burn the truck down better doing all that.
Great video and work though 😎
How much should I charge for this job?
12-14 hours
Is there a part 2 to this video?
Sorry chris, i didn't record the installation procedures.
Wow.. why did they decide to install it back there? 🤦🏽♂️
How much this job cost
Labor only. Almost 1k$ US
@@ejmegzcarvlog7226 thank you I have the same problem with my suburban
@@zairacabadas853 what country you from?
@@ejmegzcarvlog7226 Los Ángeles california
@@zairacabadas853 The cost that I giving to you is from saudi riyal currency then I converted in to US$. So its different from your country the cost for per hour.
Took the dash out only took 4 hrs.
Thank you modeeeeeeer
Modeeeeer kabeeeer
Thats the Easy Way ?
Yes, and fastest way, if your not a technician you can't relate this way.
Part 2 ?
Let it Rest, Sorry for that, I didn't record it for installation,
For the love of God get rid of the music and edit your video with voice where needed.
Imagine having to do this without power tools
Didn't show the bolt behind the intake that's impossible to get to
Use 10mm combination ratcheting wrench and then put a wire in the wrench. My hand is to small i can able to remove the bolt with out removing the manifold
@@ejmegzcarvlog7226 that bolt was the hardest part for me but you're video made it not to bad of a job, had it in and out in 9hrs
Music is killing me
fyi, stop me if you've heard this before. But this is not the easy way. In fact it is the complete opposite of the easy way! lol!
well maybe it's different for the newer models
Get rid of "the easy way" in your title. Replace with "the only way" and delete music and that would be a start.
Id quit my job before I did all that wearing a mask
Like a rubics cube the worst the music doesn't make it any easier and to put it all back like it was the worst most mechanics won't do the job they say take it somewhere else and it's several thousands 4 or 5 easy the worst
🙏🙏🙏😘😘😘🤙🏼🤙🏼🤙🏼
Easy way, lmao.
The easy way…😂🤣😂🤣😂🤣
I hope everyone who watches this video will learn to STAY AWAY FROM GM JUNK! ULTIMATE DESIGN STUPIDITY.
Juan S. I think you are not totally aware. Most of all Car dealer brand are the same, similar on this video. Not only GM
@@ejmegzcarvlog7226 I am aware to a certain degree of how manufacturers have ILL designs on many of their vehicles, but looks like (G)REEDY (M)OTORS leads the way. Thanks
Way too complicated