I wish this video would have been the first one to pop up in my search, I spend almost an hour cussing and nearly breaking the blinds until I found this video. Thank you greatly!
Many thanks for the video. I've looked at a few videos to date and the process didn't work. Your last Roller Blind was the one I needed. Great to see all the options in a row. Helps you decide which version you have. :)
Thanks so much, this was such a helpful video and saved us from some sleepless nights! It was so clearly explained and very generous of you to share your expertise.
Hi there, I have blind 3, the bracket that controls the chord to go up and down has snapped...I can pull the blind up but not bring it down unless I manually hold the wheel up so the chain can be release to come down. Do you have any suggestions what this part is called and where could I buy one. It's a beautiful block out blind to good to throw away
Really useful video thank you. Mine was the fourth one. Now I am completely confused about how to put them back up again. None of the bits seem to fit. Would you have any advice? I would be so grateful.
If you have a look at the video , you will notice that the end you release from has a pin that pushes into a hole at the end of the blind . Once you pushed the pin into the end of the blind have a look at the bracket at the release end , you will notice it is set up so the flat end of the pin can slide into it and click into place . Line up the chain end ad then slide the release end into the bracket , it should the click inot place .
Do the four types have 'names'? Mine is the 2nd type you show but my issue is that the blind in not retracting (going up) as it's very old and sounds as if it has ball bearings inside..it doesn't have a chain, it's on an inertia type retraction? Can you offer me any advice please? I don't want plastic fittings as these crack after a short time due to the window facing South and it gets hot.
Great video covering many bases thanks. Mine is the first one (i think). I say "think" because mine seems to have a pin just like in the video, and also a smaller pin inside the main pin, but when I turn the cog wheel, ONLY the outer pin retracts and the inner pin remains and I cant remove the blind at all. I am thinking maybe the inner pin is meant to be attached to the larger pin so it all retracts together. Any ideas?
now come on over to my house....and help me because i cant get the cover over the blind off to get to it😊 ..they are cassette valance motorised solar blinds...and i cant get the cover over the roller off...
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Excellent video. Clearly demonstrated and straight to the point. Definitely saved me breaking something.
Removing the blind had turned into mission impossible before this video! A HUGE thanks 🇬🇧
I wish this video would have been the first one to pop up in my search, I spend almost an hour cussing and nearly breaking the blinds until I found this video. Thank you greatly!
RUclips listened to your feedback because it was the first one for me
Thanks so much. I’ve watched so many videos and none of them told me the right information about my type of blind
Thank you so much . After 1 hour struggle the blind came off in 1 second after I watch the clip.
I spent a hour trying to figure this out and the answer is 30sends in your video. Thanks for saving me mate
Thank you! Thank you! Thank you! This video did the trick after watching a number of other videos that weren't my blind type. Thank you so much!
This video saved me!!! Every other tutorial on roller blind removal only had instructions for the first type. Mine was the third!!
Same here! Thank you 😊
Do you know the name of the third type please ?
Thanks for posting video. Mine was option 4. Very helpful video that wastes no time getting to the point.
I commented on your "How to for Venetian Blinds" which was really great. Again thank you for this tutorial as well. It really helped. Top job...
Big help wasted time trying to figure it out myself before this quick and to the point video helped me out thanks mate.
I had to watch 6 useless videos before I found yours with the right type for me. Thank you!
Dear Mr B Repair, thank you for showing us how to fix our blinds. you are amazing :)
My pleasure!
Thank you I have been struggling for a week to try and figure out how to get mine down
Just what I needed to remove the blind. Cheers.
Many thanks for the video. I've looked at a few videos to date and the process didn't work. Your last Roller Blind was the one I needed. Great to see all the options in a row. Helps you decide which version you have. :)
Thanks so much, this was such a helpful video and saved us from some sleepless nights! It was so clearly explained and very generous of you to share your expertise.
This video is great! Saved me a repair/service call.
Thank you for this content. It worked first time with no damage.
Thank you so much!! Great examples, simple, and exactly what I needed!!
very helpful, other videos i checked only explained one type of install which confused me. thank you!
Great advice. Mine was the fourth type. So simple when you know how
Thanks for this video. I was nearly at the point of damaging the blind out of frustration 😂
Thank you. Saved me a lot of fiddling around!
This is the video I needed, really good and super helpful, had to click the subscribe button :)
Thank you! 🌻 And thank you again because it turns out I have two types. 🌻🌻
Thanks guys, just save me ruining a perfectly good blind by trying to crowbar it off the window frame.😬Type 1 thanks for sharing your expertise.
Thanks for the clarity! I’m going to check what type I’ve got!
Just what I needed to know.(Mine was type 4) Thanks!
Thank you spent 5mins trying to pry the spring loaded pin back with no success, watched your video and removed it in 3 seconds 😂
Thanks so much. Very helpful piece of information👍🏻
Thank you! Just taking mine down for painting and I couldn’t figure it out!
Thank you. That was so simple and lucky for me mine was the first example.
Thanks mate! Saved me a couple hundred dollars!!
Hi there, I have blind 3, the bracket that controls the chord to go up and down has snapped...I can pull the blind up but not bring it down unless I manually hold the wheel up so the chain can be release to come down.
Do you have any suggestions what this part is called and where could I buy one. It's a beautiful block out blind to good to throw away
Great video, it turns out I got the 3rd variation :)
Thank you! This really helped!!
Really useful video thank you. Mine was the fourth one. Now I am completely confused about how to put them back up again. None of the bits seem to fit. Would you have any advice? I would be so grateful.
If you have a look at the video , you will notice that the end you release from has a pin that pushes into a hole at the end of the blind . Once you pushed the pin into the end of the blind have a look at the bracket at the release end , you will notice it is set up so the flat end of the pin can slide into it and click into place . Line up the chain end ad then slide the release end into the bracket , it should the click inot place .
@@BlindRepairSolutions thank you so much. I’ll give that a try.
Very helpful video, thanks
Do the four types have 'names'? Mine is the 2nd type you show but my issue is that the blind in not retracting (going up) as it's very old and sounds as if it has ball bearings inside..it doesn't have a chain, it's on an inertia type retraction? Can you offer me any advice please? I don't want plastic fittings as these crack after a short time due to the window facing South and it gets hot.
Thank you very much very helpful
Thank you. Very clear and all in one video.
Lifesaver. Thank you sir
Thanks mate at work helped alot
Mine has one end that you can push in. Put it won't budge.
Thankyou soo much, got my problem solved👍👍
What’s the third type of blind called?
Mine is the first type and I never find that the wheel can be turned until this video. Thanks!!
Thank you I had the last one
Ours in no. 3 - brill, job done.
Very helpful. Thanks.
Awesome little video
Thank u so much sir for this video😊🤗
Thank you very much.
Great video covering many bases thanks. Mine is the first one (i think). I say "think" because mine seems to have a pin just like in the video, and also a smaller pin inside the main pin, but when I turn the cog wheel, ONLY the outer pin retracts and the inner pin remains and I cant remove the blind at all. I am thinking maybe the inner pin is meant to be attached to the larger pin so it all retracts together. Any ideas?
Hi Mikey, I might be able to advise you on this, could you send me a photo - info@blindrepairsolutions.com.au
I've got the 3rd type, still can't get it off. It lifts and pulls back slightly, but not enough to get off
Thank you 🙏
Thank you sir.
Which one is ikea fridans type?
Thank you very much!
If every RUclips video was this straight forward, we’d have colonized Mars already
I nearly fell out of my van laughing when I read you comment . It made my day , thanks .
so helpful thank you!
I can onlyget the chain only to go one way, how can I fix it
Thank you
Thank you!
There appears to be a fifth system. Looks like I’ll have to cut through the rod to remove it.
now come on over to my house....and help me because i cant get the cover over the blind off to get to it😊 ..they are cassette valance motorised solar blinds...and i cant get the cover over the roller off...
If you email me a photo on info@blindrepairsolutions.com.au, I can have a look and see if I can advise you from there.
@@BlindRepairSolutions thank you ...i will email a photo :)
@@BlindRepairSolutions thanks...i emailed you
Legend
Top man.
I don't have either of those.... the blinds are as old as the house, over 20 years old 😥
If I could see it I could let you know , there is a link to our website , you can make an enquiry there .
@@BlindRepairSolutions great thank you, I'll take some snapshots and send them through
So helpful thank you!
Thank you 🙏
Thank you!