Wait, get the supplies when on sale but wait for the ammo crunch to be over, once that happens then the primers and what not will be easier to find and cheaper
After he talked for several minutes I looked at the timer and said - wait a minute, its running way slow and than I looked at total video minutes 22:26 😁
I just got this kit with 1000 Remington #6-1/2 small rifle primers for 299.99 on midwayusa. after shipping and handling, hazmat fee, and taxes it was $376. Full kit and 1000 primers for under $400 felt like a good deal.
I have the RCBS stuck case remover. At some point you are going to need it. Get rid of the RCBS drill bit and get one made from high speed Steel. My drill bit lasted about three brass cases and was completely dull.
Aaaaaaaand we’re off! I got the plus kit for $425 and replaced the scale as well. I took the analog caliper to the garage for woodworking because I bought a digital set before the kit. Other than that, I have been very happy with the results of the first 500 9mm rounds I’ve loaded using RCBS dies. One thing missing from the list is annealing equipment be it a machine or a drill and flame.
I reload shot shells. Already have some of the equipment. It also does not hurt to have some back up equipment just in case. Good video. I’m very interested in getting a rebel press and getting into metallic reloading. I have several calibers of firearms. Nothing to off the wall. They are all common calibers. Just a lot of hunting and military surplus and a few ARs. Several pistols and revolvers. Posting that list saved me some work. I’ve been researching and putting together a list that I’ve made several corrections on. I see a newer or better gadget to do a task and it changes. I think I’m about ready to start ordering stuff. Thanks for the video. 👍👍👍
I agree on the electronic scale supplied, would pay extra to have the balance beam, and, I'd prefer the primer tool with the shellholder, may need it for some cartridges that don't work in "universal " jaws due to rim thickness or diameter. I don't like using a trickler, so for me, they could keep it and give me calipers instead. That is a great recommndation list you came up with too. No kit is perfect, but, the RCBS kit is pretty good.
Fill the bottom of the trickler with lead it helps from tipping over. Digital is great for scales and calipers but they will give bad reading every once in awhile. I would prefer analog cause they wont break or run out of batteries.
Hey Johnny, thanks for your very detailed info-clip which I'll watch again having a pen & paper. Without trying to be a smarty, I am surprised that you seem to prefer shopping at Amazon, whose "astronaut-owner" is not the 2nd richest dude on the planet accidently and yes, I very much prefer shopping at eBay where I usually find stuff for much (~ 20% or so) less than what Amazon charges. Thanks again and take care!
Old Will Knott (spelling?) has many, many scales that are competitive or cheaper than Amazon. Just remember if the grains function doesn't work 1 grain =64.8 mg when rounded up or just use 65mg & 1lb of powder = 7,000 grains.
I love the fact that you put a clock on the video 🤣😂🤣😂 Great video: if I wanted 5 minutes worth of info I'd just Google it myself. 20-30 minutes is perfect.
I changed the lock rings that came with my Lee 45acp dies to some I got from rcbs , I like the flat sides on their lock rings instead of those spline drive nut lockrings
You sound like the kit is worth it. For beginners who may or may not stick with reloading I personally like the Lee Challenger kit. It is way more affordable that works very well.
I personally went with the set up from "Reloading 9mm on the cheap" but have upgraded a lot of the stuff over the last 3 years. I had a $300 total budget, to get started, including components. I think I came in at $325 total, including dies, powder, bullets, primers, ect.
I want to like the Rebel press. I really do. It should be at an angle to the bench. This is just more ergonomic. I like that they finally fixed the spent primer system. It looks like priming was a whoops we forgot that. Or, they realized many never prime on the press. I seat primers as I inspect cases. The RCBS Universal hand primer should definitely be held in the hand before buying another brand. With that said, Frankford Arsenal makes a nice one. The new powder measure looks nice. Definitely one to consider. So many times extruded powders confound the new reloader. A set of Lee scoops & trickler really is a simple solution. Not many shooters load huge quantities of rifle rounds at a sitting. Scoops and tricklers use your shooting eye hand coordination and are not that slow. I prefer beam scales & dial calipers. You can sell unwanted pieces of kits and get what you prefer. All brands have good resale value.
You need to put a 1 hour 30 minute timer on that one. It will line right up with the trick you just pulled over on me with this one. Lol thanks for another great video!
Nice. I like the tube style primer feed on the rock chucker but other than that it seems cool. Its nice to have that back up just in case. Thats quite a kit👍
Rockchucker is worse in that dept, this way at least, most of that crap can be kept off the exterior of the ram, as it is internal discharge thru the bottom of the ram, not external.
The review of the product was most likely 5 minutes and all the other information was nice to see what you use in making your bullets. I do think you should have reached out to RCBS to replace the scale and do the review after they had because they will. I do like your videos. I myself only load for accurate hunting loads not necessarily one hole stuff but sometimes pretty close. One thing that I would put on the list is a press stand. I for years did without but just recently got a press stand for my single stage just because I knew it would be nice after using my Dillon 550B progressive for years with one. I only wish I would have done it sooner. Nice video busy, but nice.
Decent looking kit, stick with my Redding t7 and turrets, I really like priming on the press as I go through to fill the cases after prep, just more efficient in my manner of operations and cal feel sufficiently enough to feel the pockets friction, or lack there of, I'm about scared to say it but, probably going on around ten years at most loading never stuck a case lol
I didn't really want a Rebel (or RCS4) as I was already set but for ~$100 @ Midway on sale new a few months back I couldn't help myself and now use it strictly for bullet swaging. Rather than a small "corelle" style bowl, I've found a very small pet bowl (squared off edges) rubbed on the inside with powdered graphite to be superior due to the far more stable surface by design and virtually unbreakable. I don't use a drop (despite owning one) and prefer scoops (I have new and VERY old) and typically drop less than a grain off on the scale. A 0.17cc scoop is near ideal to finish it off too but doesn't come in the kit by default. Lee provided it at no additional charge in an order I placed with them for something else. I have a powder trickler but have virtually quit using it in favor of the above. I have various "tools" to make things easier and I've no gripe with the Lyman aluminum funnel I got for a song. However, I rarely get them out and generally prefer the caliber/diameter specific Satern I splurged on that aren't that expensive anyway in the calibers I load most frequently.
Oh, and I absolutely HATED grease in the Rebel. I avoided using after foolishly greasing it initially. I took it apart, cleaned out all the grease, and bought a simple push/pump oiler compatible with the zerk (~$7 on amazon) and loaded up with a good oil and it's been pleasant ever since.
Love my Rebel kit. Hate the cheap scale also. Loaded about 5k 223,9mm, 243 and 308 Win so far with it without any complaints other than the scale. Bought a FA intellidropper and a beam M500 beam scale, both are much better.
11:33 I own but don't like the standard hand primer with shell holders. It's fine for one or two cartridges, but with more than that you'll spend a lot of time changing them out. I didn't know there was a difference and got it thinking that it was the universal tool. Been a bit disappointed.
Stuck case removers are like spare tires. If you have one you won't need it. If you don't well let's just say you'll have an oh shoot moment more often than you realize.
Thats a good looking kit there JRB, man my wife's gonna hate you so much when I buy another kit!!!! But she has been trying to get me to go green for years now, not sure if thats even what she meant but I'm going with it...
I'll tell youall a case length gauge for my particular 7mmremmag custom cut chamber is a 11mm socket....fits the same and perfect every time...same socket for years, 11 i believe, if I'm wrong ill edit, as well as other randoms that fit 308 and 270
would be a nicer kit if all the parts came inside the box rather than missing , also the bar is directly in the center it would be nicer offset a bit so you could look directly at what you are doing not around the side of the bar . but for under 450 its a nice package .
Hopefully you can get them to replace the scale and review it in due course. I've lost bits off my 13 year old Partner press and hand primer through my own carelessness, and RCBS still sent replacements out to me for nothing. I wish this kit had been on the shelf when it came time for me to buy my first press. As for the primers, I'd rather have to park a small trash can under the press than have the primers spit out at some unpredictable angle. IIRC the universal primer does have its limitations regarding the cases it can accept; the standard hand primer, using shell holders, doesn't have that issue. I want analogue dial calipers because analogue dial calipers never run out of batteries.
Great summary of this kit. Like have few things from the kit just not the full kit stuff I already have. Not sec of stuff would not hert. But price would. Let's get bullet comparators what other brands I only seen Hornaday one.
Sinclair has a cheaper one, but it and the Hornady have not such great hole sizing QC, nect step up is Short Action Customs, not so cheap, there are some others out there, all custom , all not cheap.
Johnny, very nice review of the RCBS Rebel press. I'm waiting on the delivery of the RCBS Summit press I'm going to be doing a review on my channel shortly. Hope everything's been going good for you. Echo
Just added a rebel press to my bench near my rock chk of 30 years. QUESTION... I see you mentioned how tight the tolerances are with the press/ram. I actually have quite a bit of play in my linkage below the ram. Mostly on the upper linkage. Enough play where you can move the ram arm back and forth about a 1/8”. Both at the top arm position as well as when the ram is fully extended. My rock chucker has zero play in the linkages. Just curious if anyone else has experienced this with their rebel ? RCBS stated is was normal but I thought it was way to sloppy...
Would you recommend this kit over the rock chucker supreme kit? It includes the M500 mechanical scale instead of the digital which seems to be more useable. It does not include the powder trickler just the uniflow. Or is the rebel kit better and just purchase the scale. Price difference is only 10 dollars between the two.
![BabyChiefDoit - Wonderful Time (Official Music Video) [Shot By @Rxllo]](http://i.ytimg.com/vi/_Bfqt3zV2KE/mqdefault.jpg)
That timer is like the “RUclips- skip ad” timer. Same speed 😂
My eyes behold the cleanest bench in JRB history... I’m amazed.
Still waiting for him to mount his bench to the wall.
@@texpatriot8462 That will be in the far future in a galaxy far far away
That 5 mins. just wizzed by. I want to get into reloading and this video was perfect!!
Wait, get the supplies when on sale but wait for the ammo crunch to be over, once that happens then the primers and what not will be easier to find and cheaper
@@tugboat_actual Yes, that’s why I haven’t bought anything yet and doing my homework in the meantime.🙂 central Florida here Tampa bay area
I feel like I've been watching this all week 😎
After he talked for several minutes I looked at the timer and said - wait a minute, its running way slow and than I looked at total video minutes 22:26 😁
Just wait for the 25, 000 seconds video (:
best 5 min I spent in a long time.
The 5min timer speed makes me feel like I'm on mushrooms 🍄
But it was RCBS green.
Congratulations on finishing your marathon, Mr.Bench. Can't wait to see the long version. I love the 5 minute timer barely creeping by 🇺🇸👍👊
Good to see the final product. I've been watching on-off for the editing on twitch. Never realized how much work and time goes into making a video.
I never knew how much time and energy you put into these until I watched on twitch. Appreciate all the work.
I just got this kit with 1000 Remington #6-1/2 small rifle primers for 299.99 on midwayusa. after shipping and handling, hazmat fee, and taxes it was $376. Full kit and 1000 primers for under $400 felt like a good deal.
Same here! Sweet deal for sure
You are the man! I wouldn't have started reloading without your videos. And that timer is hilarious.
I want the long version!
Oh snap I’ve been watching & waiting and here it is
Glad to see you back on RUclips. I’ve tried to watch the twitch stuff but life is too short😀.
Good video! A lot of new reloaders need a lot more videos like this. It's very valuable information and it's got a great presentation style.
Thank you for the best review of a reloading kit and personal recommendations I've ever seen. Great video
Johnny you are relentless. Great reveal for RCBS. Not sure if I would put my RC aside but good explanation of product as usual.
Theeere's Johnny!! Was fun watching the making of this video on Twitch
That was 5 minutes well spent. Thank you sir!
Amazingly helpful. Thank you!
great over view of a kit
For Emmy nomination ! "Now roll the credits" 😜
The super slow five minute countdown was a nice touch 😂
Hey big boy about time . See if our work was worth it. Excellent so far
Love your thorough videos!
Thank you for bringing us along!!
Glorious! Absolutely glorious!
The primer GO - NO GO gauge is handy for the Lake City brass.
I think I'll get the Rebel and Hornady lock and load bushings. All I've heard is good things about the Rebel master kit. Thanks for the video.
I have the RCBS stuck case remover. At some point you are going to need it. Get rid of the RCBS drill bit and get one made from high speed Steel. My drill bit lasted about three brass cases and was completely dull.
Aaaaaaaand we’re off! I got the plus kit for $425 and replaced the scale as well. I took the analog caliper to the garage for woodworking because I bought a digital set before the kit. Other than that, I have been very happy with the results of the first 500 9mm rounds I’ve loaded using RCBS dies. One thing missing from the list is annealing equipment be it a machine or a drill and flame.
I reload shot shells. Already have some of the equipment. It also does not hurt to have some back up equipment just in case. Good video. I’m very interested in getting a rebel press and getting into metallic reloading. I have several calibers of firearms. Nothing to off the wall. They are all common calibers. Just a lot of hunting and military surplus and a few ARs. Several pistols and revolvers. Posting that list saved me some work. I’ve been researching and putting together a list that I’ve made several corrections on. I see a newer or better gadget to do a task and it changes. I think I’m about ready to start ordering stuff. Thanks for the video. 👍👍👍
Man that timer at the bottom goes as slow as the time clock at work just before quitting time.
I agree on the electronic scale supplied, would pay extra to have the balance beam, and, I'd prefer the primer tool with the shellholder, may need it for some cartridges that don't work in "universal " jaws due to rim thickness or diameter. I don't like using a trickler, so for me, they could keep it and give me calipers instead. That is a great recommndation list you came up with too. No kit is perfect, but, the RCBS kit is pretty good.
Fill the bottom of the trickler with lead it helps from tipping over. Digital is great for scales and calipers but they will give bad reading every once in awhile. I would prefer analog cause they wont break or run out of batteries.
It’s only 5 min long people
Holy cow. 7 hours of of Johnny! Gonna need a bunch of popcorn. 😁
Hey Johnny,
thanks for your very detailed info-clip which I'll watch again having a pen & paper.
Without trying to be a smarty, I am surprised that you seem to prefer shopping at Amazon,
whose "astronaut-owner" is not the 2nd richest dude on the planet accidently and yes, I
very much prefer shopping at eBay where I usually find stuff for much (~ 20% or so) less
than what Amazon charges.
Thanks again and take care!
Very Helpful! Well Done.......
Old Will Knott (spelling?) has many, many scales that are competitive or cheaper than Amazon. Just remember if the grains function doesn't work 1 grain =64.8 mg when rounded up or just use 65mg & 1lb of powder = 7,000 grains.
Johnny, man, you rock! I just love your videos, learn a lot, and laugh my ass off. Thank you!!
I love the fact that you put a clock on the video 🤣😂🤣😂
Great video: if I wanted 5 minutes worth of info I'd just Google it myself. 20-30 minutes is perfect.
My old Speer manual has hank JR giving the history of the 45LC. The first cartridge I started on. It’s a rad manual
Glas to see another RUclips video. Thank You.
I changed the lock rings that came with my Lee 45acp dies to some I got from rcbs , I like the flat sides on their lock rings instead of those spline drive nut lockrings
Another cheap option for case measurement are the Lyman or Hornady case gauges. They're a cheap, quick way to check cases when resizing.
Thanks Johnny!
Good stuff I watch all the time. I've learned a lot keep up the good work thumbs up
You sound like the kit is worth it. For beginners who may or may not stick with reloading I personally like the Lee Challenger kit. It is way more affordable that works very well.
I personally went with the set up from "Reloading 9mm on the cheap" but have upgraded a lot of the stuff over the last 3 years. I had a $300 total budget, to get started, including components. I think I came in at $325 total, including dies, powder, bullets, primers, ect.
I want to like the Rebel press.
I really do.
It should be at an angle to the bench. This is just more ergonomic.
I like that they finally fixed the spent primer system. It looks like priming was a whoops we forgot that. Or, they realized many never prime on the press. I seat primers as I inspect cases.
The RCBS Universal hand primer should definitely be held in the hand before buying another brand. With that said, Frankford Arsenal makes a nice one.
The new powder measure looks nice. Definitely one to consider.
So many times extruded powders confound the new reloader. A set of Lee scoops & trickler really is a simple solution. Not many shooters load huge quantities of rifle rounds at a sitting. Scoops and tricklers use your shooting eye hand coordination and are not that slow.
I prefer beam scales & dial calipers. You can sell unwanted pieces of kits and get what you prefer. All brands have good resale value.
Love to see more of the PPC. Forming cases from 220 Russian would different. Love your videos... thank you!
Long version available here: ruclips.net/video/qH7tG9Ri5e4/видео.html
It’s so good it feels like 5 minutes
Heck yeah
Wow 7hrs . That long one for u not saying did do just 24hr stream for 100,000 followers sat watch lot of that
You need to put a 1 hour 30 minute timer on that one. It will line right up with the trick you just pulled over on me with this one. Lol thanks for another great video!
Nice. I like the tube style primer feed on the rock chucker but other than that it seems cool. Its nice to have that back up just in case. Thats quite a kit👍
Lol, in Australia this kit is $955. Great vid!
Got your tattoo already picked out 🤣🤣🤣
Grease and primer gunk is a recipe for excess wear on the ram bearing surface = design flaw.
Rockchucker is worse in that dept, this way at least, most of that crap can be kept off the exterior of the ram, as it is internal discharge thru the bottom of the ram, not external.
Lol The count down timer gives me anxiety.
I was the 3000th view. I feel special. Good video. Will watch the longer one too!
The review of the product was most likely 5 minutes and all the other information was nice to see what you use in making your bullets. I do think you should have reached out to RCBS to replace the scale and do the review after they had because they will. I do like your videos. I myself only load for accurate hunting loads not necessarily one hole stuff but sometimes pretty close. One thing that I would put on the list is a press stand. I for years did without but just recently got a press stand for my single stage just because I knew it would be nice after using my Dillon 550B progressive for years with one. I only wish I would have done it sooner. Nice video busy, but nice.
Best 5 minutes of my life!!!
It's shake and bake, and I helped
If you live in the PNW and have access to coastal farm and ranch you can get this for 399.99 right now after 20% off coupon.
Decent looking kit, stick with my Redding t7 and turrets, I really like priming on the press as I go through to fill the cases after prep, just more efficient in my manner of operations and cal feel sufficiently enough to feel the pockets friction, or lack there of, I'm about scared to say it but, probably going on around ten years at most loading never stuck a case lol
It may have already been mentioned but if you wipe the electronic scale down with a used dryer sheet it should settle down
Best 5 minute timer ever.
I didn't really want a Rebel (or RCS4) as I was already set but for ~$100 @ Midway on sale new a few months back I couldn't help myself and now use it strictly for bullet swaging.
Rather than a small "corelle" style bowl, I've found a very small pet bowl (squared off edges) rubbed on the inside with powdered graphite to be superior due to the far more stable surface by design and virtually unbreakable.
I don't use a drop (despite owning one) and prefer scoops (I have new and VERY old) and typically drop less than a grain off on the scale. A 0.17cc scoop is near ideal to finish it off too but doesn't come in the kit by default. Lee provided it at no additional charge in an order I placed with them for something else. I have a powder trickler but have virtually quit using it in favor of the above.
I have various "tools" to make things easier and I've no gripe with the Lyman aluminum funnel I got for a song. However, I rarely get them out and generally prefer the caliber/diameter specific Satern I splurged on that aren't that expensive anyway in the calibers I load most frequently.
Oh, and I absolutely HATED grease in the Rebel. I avoided using after foolishly greasing it initially. I took it apart, cleaned out all the grease, and bought a simple push/pump oiler compatible with the zerk (~$7 on amazon) and loaded up with a good oil and it's been pleasant ever since.
Love my Rebel kit. Hate the cheap scale also. Loaded about 5k 223,9mm, 243 and 308 Win so far with it without any complaints other than the scale. Bought a FA intellidropper and a beam M500 beam scale, both are much better.
My scales came in working well.
11:33 I own but don't like the standard hand primer with shell holders. It's fine for one or two cartridges, but with more than that you'll spend a lot of time changing them out. I didn't know there was a difference and got it thinking that it was the universal tool. Been a bit disappointed.
Good information and video. Thanks
This kit is available at midway usa for $349
I just purchased one.
Quickest 5 minutes ever.
Stuck case removers are like spare tires. If you have one you won't need it. If you don't well let's just say you'll have an oh shoot moment more often than you realize.
How how time flies
Thats a good looking kit there JRB, man my wife's gonna hate you so much when I buy another kit!!!! But she has been trying to get me to go green for years now, not sure if thats even what she meant but I'm going with it...
Anything you do, I am interested. I will watch you shoot the rock chucker, or rocks.
If you were a Twitch Subscriber, you would have seen how much time and effort @jrb spent on editing. Two weeks.
I'll tell youall a case length gauge for my particular 7mmremmag custom cut chamber is a 11mm socket....fits the same and perfect every time...same socket for years, 11 i believe, if I'm wrong ill edit, as well as other randoms that fit 308 and 270
I have been doing the same thing
The rock chucker was called that bc it chucked the primers everywhere they changed that and was no longer a rock chucker so name changed to
In my own experience, RCBS has excellent customer service. I would contact them for a replacement scale and loading block.
would be a nicer kit if all the parts came inside the box rather than missing , also the bar is directly in the center it would be nicer offset a bit so you could look directly at what you are doing not around the side of the bar . but for under 450 its a nice package .
Hopefully you can get them to replace the scale and review it in due course. I've lost bits off my 13 year old Partner press and hand primer through my own carelessness, and RCBS still sent replacements out to me for nothing.
I wish this kit had been on the shelf when it came time for me to buy my first press. As for the primers, I'd rather have to park a small trash can under the press than have the primers spit out at some unpredictable angle.
IIRC the universal primer does have its limitations regarding the cases it can accept; the standard hand primer, using shell holders, doesn't have that issue.
I want analogue dial calipers because analogue dial calipers never run out of batteries.
The RCBS Rebel was planned to be the Rock Chucker's replacement!
Johnny, where did you get the holder for the Hornady comparator and headspace gauges?
Your batteries are obviously dying on your timer, longest 5 minutes of my life lol.
Great summary of this kit. Like have few things from the kit just not the full kit stuff I already have. Not sec of stuff would not hert. But price would. Let's get bullet comparators what other brands I only seen Hornaday one.
Sinclair has a cheaper one, but it and the Hornady have not such great hole sizing QC, nect step up is Short Action Customs, not so cheap, there are some others out there, all custom , all not cheap.
@@davecollins6113 would the Sinclair do full shell size like the Hornady ones.
Hey Johnny, if you ever get the chance, I think it would be really interesting to see a review of QuickLoad. I’m sure you have thoughts about it.
Awesome!
Stuck cases happen much more often on new dies than any other time
Dial calipers are so much better than cheap (
After days on days of editing. Finally. lol
I just paid $299 for the Rebel kit from MidwayUSA August20,2022
The long version will be like Christmas in Jul...une
Check out the FA Pile Driver bullet puller
Johnny, very nice review of the RCBS Rebel press. I'm waiting on the delivery of the RCBS Summit press I'm going to be doing a review on my channel shortly. Hope everything's been going good for you. Echo
Whats with the timer?
Just added a rebel press to my bench near my rock chk of 30 years. QUESTION... I see you mentioned how tight the tolerances are with the press/ram. I actually have quite a bit of play in my linkage below the ram. Mostly on the upper linkage. Enough play where you can move the ram arm back and forth about a 1/8”. Both at the top arm position as well as when the ram is fully extended. My rock chucker has zero play in the linkages. Just curious if anyone else has experienced this with their rebel ? RCBS stated is was normal but I thought it was way to sloppy...
Please, review the Redding Big Boss II
Would you recommend this kit over the rock chucker supreme kit? It includes the M500 mechanical scale instead of the digital which seems to be more useable. It does not include the powder trickler just the uniflow. Or is the rebel kit better and just purchase the scale. Price difference is only 10 dollars between the two.
how many parts are made in China?
I'm guessing the scale for sure
Johnny, how did you end up liking the Frankford bullet seating die set up?