hola, me gustaria comprarla y montarla pero añadiendoo caballos y conductor... ¿cuantos caballos y de que tamaño le quedarian bien?¿y el conductor?. Gracias. Ha quedado preciosa
That is exactly the point I'm at brass rails. How did you hold the brass enable to solder that's my problem trying to figure out the right way to hold him still while soldering
Nice job. I built an Amati 1/10 stagecoach which in many ways is similarly complex and appreciate your work. (If anyone wants to do such a realistically assembled stagecoach, make sure you have a LOT of small clamps.) You can also learn a lot about the history of stagecoaches doing such a project including all the terms. For example, I didn't know what the three metal bars were on the coach sides below the front windows. I had to contact Hansen Wheel and Wagon (who builds authentic Concord stagecoaches) and they explained they are called "bunters" and prevent the front wheels from hitting the side of the stagecoach with a sharp turn if the coach body rocks too much. They said not all had them, and those that had them didn't always have three. Also, why is it called a "stagecoach"? Because it traveled in "stages" changing horses every couple of hours at "stage stops". Sometimes they had passengers on the top and they were called "hangers on" for perhaps obvious reasons.
I am building the same Stagecoach by Argentina Latina I wonder if you would send me your email or Facebook page so I can compare notes I've got the frame belt now I had to stop on the wheels I didn't have a forstner bit I bought one now I'm at the point I'm going back and finishing the wheels
@@bilfloyd5713 Here is a detailed write up I made when assembling the Amati brand stagecoach (which is different than the one in the RUclips video). Maybe there will be some helpful ideas there (67 pages with many photos - will probably take a long time to load). www.dropbox.com/s/mu70xd7vwi6l24k/Stagecoach for Barbara revised.pdf?dl=0
I really need your help with soldering the railings I am stuck I've got everything else tilt my email address is bilfloyd836@gmail.com I am so frustrated with myself I have all the tools for soldering and just having big problems I really would appreciate some help
En una escala del 1 al 10 yo le daría un 5 en cuanto a dificultad. Le aconsejo que se adentre en este mundo. Es mejor que el de las maquetas de plástico, que también conozco. No debe tener problemas a la hora de terminar una maqueta como esta. Si tiene cualquier otra duda al respecto, estaría encantado en ayudarle. Saludos.
I didn't build one of this brand, but I did build the Amati 1/10 stagecoach which is more or less similar. Harder in some areas, easier in others. I would rate this sort of kit at 8 complexity on a scale of 1 to 10. But this sort of kit you just build a bite at a time to make it manageable.
hola, me gustaria comprarla y montarla pero añadiendoo caballos y conductor... ¿cuantos caballos y de que tamaño le quedarian bien?¿y el conductor?. Gracias. Ha quedado preciosa
What a magnificent model you made!
xKmotx Thank you very much
I am building the same kit now I love your video
Thank you very much. Good luck
That is exactly the point I'm at brass rails. How did you hold the brass enable to solder that's my problem trying to figure out the right way to hold him still while soldering
Magnifique 👍👍👍♥️♥️♥️♥️🇩🇿🇩🇿🇩🇿
Muchas gracias
Nice job. I built an Amati 1/10 stagecoach which in many ways is similarly complex and appreciate your work. (If anyone wants to do such a realistically assembled stagecoach, make sure you have a LOT of small clamps.) You can also learn a lot about the history of stagecoaches doing such a project including all the terms. For example, I didn't know what the three metal bars were on the coach sides below the front windows. I had to contact Hansen Wheel and Wagon (who builds authentic Concord stagecoaches) and they explained they are called "bunters" and prevent the front wheels from hitting the side of the stagecoach with a sharp turn if the coach body rocks too much. They said not all had them, and those that had them didn't always have three. Also, why is it called a "stagecoach"? Because it traveled in "stages" changing horses every couple of hours at "stage stops". Sometimes they had passengers on the top and they were called "hangers on" for perhaps obvious reasons.
I am building the same Stagecoach by Argentina Latina I wonder if you would send me your email or Facebook page so I can compare notes I've got the frame belt now I had to stop on the wheels I didn't have a forstner bit I bought one now I'm at the point I'm going back and finishing the wheels
@@bilfloyd5713 Here is a detailed write up I made when assembling the Amati brand stagecoach (which is different than the one in the RUclips video). Maybe there will be some helpful ideas there (67 pages with many photos - will probably take a long time to load). www.dropbox.com/s/mu70xd7vwi6l24k/Stagecoach for Barbara revised.pdf?dl=0
@@bilfloyd5713 mi email manuel.benitez.xerez@gmail.com
@@bilfloyd5713 mi email manuel.benitez.xerez@gmail.com
I really need your help with soldering the railings I am stuck I've got everything else tilt my email address is bilfloyd836@gmail.com I am so frustrated with myself I have all the tools for soldering and just having big problems I really would appreciate some help
nice build manuel 👏
Muchas gracias
Just curious to know the complexity of the upholstery work
Muchas gracias. Que disfrutes realizando la maqueta.
Beautiful😍✨❤
Thank you! 😊
Where did you hide the switch for the lanterns
Looks lovely but I think a smaller scale would be better like 1/20
I bought two mm straight brass rod for the luggage rack got to teach myself to solder brass LOL
Para la unión de las varillas de latón, usé pegamento rápido tipo LOCTITE SUPER GLUE 3
I really really appreciate your help your coach is beautiful would love to show you my coach see what you think
Si quieres, puedes enviarme fotografías por email
@@manuelbenitezxerez I need a translator
Nice job, would like to know type of yellow you used from Tamiya...
nice job
Thank you very much
Amazing
Muchas gracias. Thank you.
Great, but it's too clean, it needs weathering so it looks the period.
But wouldnt, at the time, If it were brand new, Look clean as well?
COMO PUEDO ADQUIRIR ES TIPO DE ARTESANIA
Buenas tardes. En Amazon puede adquirir esta maqueta, buscando en Artesanía Latina Stage Coach. Sale aproximadamente unos 150 €
On a scale of 1 to 10, how difficult is this kit to build? I've been building for 30+ years, but its usually the plastic variety.
En una escala del 1 al 10 yo le daría un 5 en cuanto a dificultad. Le aconsejo que se adentre en este mundo. Es mejor que el de las maquetas de plástico, que también conozco. No debe tener problemas a la hora de terminar una maqueta como esta. Si tiene cualquier otra duda al respecto, estaría encantado en ayudarle. Saludos.
I didn't build one of this brand, but I did build the Amati 1/10 stagecoach which is more or less similar. Harder in some areas, easier in others. I would rate this sort of kit at 8 complexity on a scale of 1 to 10. But this sort of kit you just build a bite at a time to make it manageable.
Modelo en madera de Artesanía Latina.
LEASE. ANNY ZAMORA
MI EMAIL anny.zamora.murillo
@Hotmail.com
Очень красиво.