It's actually pretty cool you repurposed something to make a desk. I did the same thing with an old white dresser. Sand it down and stained it. Came out great. Every RUclipsr has the same desk. It's ok to be different.
Yeah, I really like to take old things, or broken things and make them useful again. Maybe in the future I could sprout a channel about this kind of stuff
I have two PC's at my desk (Linux & Windows). I use a suptek vertical dual mount with matching 27" curved monitors. It really is great to free up all that desk space.
@@BootSequence When I build a new gaming PC my old one becomes my Linux system. So even though I mostly use it for stock investments and home office tasks. I have gamed it on it several times. Not into crypto mining but I could have used it for that, not that the Vega 56 would the fastest. lol
Have you done a review of the Huanuo model HNDS17B? Please respond, I'm looking for a quality dual arm for 32"/27" monitors that don't break the bank. Really gunshy since the 32" is a full QD_OLED monitor.
Yeah, the legs are down below!! Nice explanation on the Gas Arms by the way. I just bought a normal dual monitor arm (it didnt cost me much, thats a relief)
I know this was 11 months ago but I plan on getting one of these duel monitor arm setups after I buy a new office chair from Costco and a new desk. I might go with the Ikea desk setup like a lot of people own. The ones with the drawers. New subscriber here.
That sounds great. Please budget a couple of inches of space behind the desk (3-4) for the arms. Depending on the setup it might be required for the adjustment of the arms
Make sure your desk edge is not weak cheap and can actually support the weight of the stand with 2 monitors, on that single clamp point. You're gonna get home one day to find your monitors fallen and probably cracked and the desk looking like your dog chewed into it. And dont think it wont happen, it could take months to happen. I've never heard anyone address that. And if you do have these arms installed, be it 1v1 or 1v2, doesnt matter, check the integrity of your desk weekly. Trust me it will snap so quickly without warning.
That was my mistake when I first bought a monitor stand lol. The worse part is that the stand that I bought (which was a North Bayou single monitor stand) was installed on a foldable table. Yeah, you can tell what happened
Thanks for the review! But it’s doesn’t match my needs, can you recommend me one that tilts up to 90 degrees? So I can rest my hand on it, I need that for my pen display for drawing comfortably
I have the same one that you bought in 2020 and I am having such a tough time having both monitors aligned to the same height. Any advice that you can share to show how to align to the same height.
I just got the HNDS8 and the dual arms are great, However, a warning for anyone with desk grommet holes of 3.15" (e.g. Jarvis, Uplift, etc.) that the bottom plate is not wide enough to support the grommet mount option.
Wobble is mainly a desk issue. But the dual clamps of the 8 model would offer even more stability. I get a bit of wobble if I jitter my leg. But once again that's because my floors transfer the vibration.
i want to ask something to make sure before i buy it. It holds 14 pounds each monitor or both monitor it must be 14 pounds ? I have two 24'' samsungs, Can it hold them ? Thank you!
Still using the cheaper one on my personal display. And I do move it it around pretty often. Would 100% recommend. Go for the bigger option if you want more movement, but the smaller one I cant say a single bad thing. It's great!
Much easier to stack the monitors on top of each other, and the possibility of using only one monitor for now and expand in the future. Plus, the HNDS8 can handle larger monitors.
what kind of arm do you recommend? I have two 27 inch monitors. The monitor arm with bar or the other one? The two from the video as an example. HNDS6 or HNDS8 😢
I use the hnds6 for my 2 27 inches. It's great. I'd recommend it. If, for any reason, you want to separate the screens a lot, hnds8 is good for that ! Link in description of you want , but you don't have to :).
Hi, my problem is how to be able to place two 32" monitors side by side horizontally, taking up as little space as possible inside the desk and no space outside as it is attached to the wall. Is possible to do such thing orienting both arms or upper arms all to the left or right?
ideally, you would go with 2 arm mounts. but the larger option does allow for dual 32 inches. its just not very flexible as in the will only be viewable in a very obtuse angle.
@@BootSequence Obtuse angle should be fine considering that the two monitor are curved and it could be useful to dispose them in a sort of arch shape..the only issue is how the baricentre could be maintained. Traditional configurations with arms take at least 30cm of desk..so i really need to place both arms parallel to the wall. I wonder if I could align monitor putting those arms in the opposite direction like "frog legs" instead of putting them in almost the same direction at the expense of the center of gravity...
Yes it will! It's a 100x100 adapter so no problems :). Hope this helps and use my link if you don't mind. It helps me a ton and won't cost you anything. If you have any other questions, I'm here for ya !
Please i need help Can someone tell me if there is any way i could stack a 34 inches monitor instead of 32 with a 27 inc monitor with the dual gas spring arms ?? Or atleast help me choose a 34 inches monitor dual arm mount thanks
I have two 27 inch monitors and I need them to be 6 inches off the desk and a few inches forward since there's a raised part of the desk in the way. Does anybody know if the HNDS6 would be able to fit them?
Do you mean falling down? If so, there's a Allen key spot at the back joint. Sticking the included Allen key and rotating counter clock wise, half a turn at a time and check if the monitor still falls
As much as I’ve missed the regular boot sequence daily updates, I’m looking forward to this series you have planned I have the pillar mount (you know the one you paid for with your own money 😂) for my setup and it’s really good holds well but only have one complaint about it…. That when you tilt the monitor downwards it looses the tension and the screen just faces the table and I have to retighten the tilt bracket again, you’ll have to let me know if you have that issue too Otherwise the table mounting and arms are study as…. Love the flooring table great repurposing example
@@BootSequence no never reached out to the manufacturer, I just put it down to something I did wrong when mounting the monitors or the 32” ultra wides is too heavy plus I only ever turn one monitor into a new position for when I split the two screens up into two independent gaming setups for the kids to play nice with each other and then back for when I’m editing or streaming with the second system I never have need to tilt the screen, so when it does tilt down I just quickly tighten it back up and tell the kids to stop touching the screens I’ve had the mount for a year or so will be pass the warranty Would never go back to monitor stands again after have mounting arms, oh the three glory hole of shame put me in stitches
Neither. Tbh the best dual monitor arm setup is…. Two single arms. As someone who used to work selling these. Nothing beats the flexibility compared to these dual arm setup.
I want a stacked monitor setup w/ PG27AQDM & Koorui 27E1QA (Both 27 in) would this support the weight of both or does anyone have other recommendations for these 2 monitors?
definitely support the weight. Theres an adjustment knob behind it to increase tension! if anything, going for the S8 version might be a better idea for greater mobility.
Ya true I bought the one with the pole . It’s aight but the freedom isn’t there . I can’t make it all the way back coz the pole . Good thing i can return it on Amazon.
@@BootSequence Do you really think that adds any benefit to the quality of the video? You could just hire some chick to talk about your content and you'd get much more engagement.
@@BootSequenceWell here's to hoping you get more "engagement" for the benefit of the video. Hopefully it's quality improves as a result, I wish your channel the very best!
In all honesty. I just wanted to make sure you knew I had purchased it prior and loved the product. Didn't want any bias from the "free product" part. I do think this product is amazing though.
How can you review these two products without ever taking them out of the box?? Waste of time, I don’t need someone to spit out Huanmo’s marketing material back at me, I can read it all on their website fine
huh ? You can clearly see me use them in the video.... I test them, film from home , write my review, bring it to the office for B-roll and put them back in the box if they need to be inventoried, film the video, edit, post and if I like them, Ibring them back home for personal use. Dafuq are you talking about ?
You can always pull the desk away from the wall. It only needs 3-4 inches for the best result on a pair of 27 inch monitor. I just think the height adjust makes a huge difference.
@@BootSequenceI wish I had the room for 3 or 4 inches. There is a reason I have it right against the wall. Plus things tend to fall down behind if you got a gap at the back.
This is a very basic info you can find shopping on the website. He obviously doesn’t use the products why you listen to him at all? He doesn’t talk about space requirements and long term use damage on his desk if any. This is useless.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
It's actually pretty cool you repurposed something to make a desk. I did the same thing with an old white dresser. Sand it down and stained it. Came out great. Every RUclipsr has the same desk. It's ok to be different.
Yeah, I really like to take old things, or broken things and make them useful again. Maybe in the future I could sprout a channel about this kind of stuff
I have two PC's at my desk (Linux & Windows). I use a suptek vertical dual mount with matching 27" curved monitors. It really is great to free up all that desk space.
Yeah I bet. I went 4ft deep with some finished plywood for the deskspace but these dual arm supports are clean af.
Man I really need to get more into linux
@@BootSequence When I build a new gaming PC my old one becomes my Linux system. So even though I mostly use it for stock investments and home office tasks. I have gamed it on it several times.
Not into crypto mining but I could have used it for that, not that the Vega 56 would the fastest. lol
What monitors do you have?
Have you done a review of the Huanuo model HNDS17B? Please respond, I'm looking for a quality dual arm for 32"/27" monitors that don't break the bank. Really gunshy since the 32" is a full QD_OLED monitor.
Yeah, the legs are down below!!
Nice explanation on the Gas Arms by the way. I just bought a normal dual monitor arm (it didnt cost me much, thats a relief)
Gotta have the center pole for mounting other stuff like camera or lighting gear too! Hot ticket are the gas arm ones WITH the center pole. Love em!
Yeah, I agree, for the V2 of the desk im swapping to the S8!
@@BootSequence yassss
link?
Can you talk more about the benefits of the center pole HNDS8? What will you do with it that the HNDS6 won't allow?
Did you ever make another video of your setup? I just found your channel today.
Might, but definitely not soon. Im trying to get ahold of the channel for myself one day!
I know this was 11 months ago but I plan on getting one of these duel monitor arm setups after I buy a new office chair from Costco and a new desk. I might go with the Ikea desk setup like a lot of people own. The ones with the drawers. New subscriber here.
That sounds great. Please budget a couple of inches of space behind the desk (3-4) for the arms. Depending on the setup it might be required for the adjustment of the arms
Make sure your desk edge is not weak cheap and can actually support the weight of the stand with 2 monitors, on that single clamp point. You're gonna get home one day to find your monitors fallen and probably cracked and the desk looking like your dog chewed into it. And dont think it wont happen, it could take months to happen.
I've never heard anyone address that.
And if you do have these arms installed, be it 1v1 or 1v2, doesnt matter, check the integrity of your desk weekly. Trust me it will snap so quickly without warning.
True. I've never had a problem with Ikea desks, and they're made pretty cheap... But I can see a thin particle board desk could have issues.
That was my mistake when I first bought a monitor stand lol. The worse part is that the stand that I bought (which was a North Bayou single monitor stand) was installed on a foldable table. Yeah, you can tell what happened
I just realised what I need to boost my in home dual or triple monitor setup. This is going on my wish list. 💯
I got the same monitor mount, love it... And i upgradd from the same exact monitor mount you had earlier...
can you stack these moniters?
Yes!
Thanks for the review! But it’s doesn’t match my needs, can you recommend me one that tilts up to 90 degrees? So I can rest my hand on it, I need that for my pen display for drawing comfortably
I have the same one that you bought in 2020 and I am having such a tough time having both monitors aligned to the same height. Any advice that you can share to show how to align to the same height.
Tightening the spring on both, or just the heavier monitor might make it easier.
I wish you would have actually shown these in the setup
I noticed the Alesis logo on what looks like a keyboard. Are you also a drummer?
I can handle myself on the drums, but I dont own a kit. The Alesis is my midi controller. One of the best I've ever had, and I've owned MANY!
I have an Alesis Strike Kit and I like it very much. I have been a drummer since High School, which was 40 years ago...
Like the desk, did you do all the glueing indoors or outside?
glueing? I did everything indoors.
I just got the HNDS8 and the dual arms are great, However, a warning for anyone with desk grommet holes of 3.15" (e.g. Jarvis, Uplift, etc.) that the bottom plate is not wide enough to support the grommet mount option.
Yeah, but what about the wobble criteria?
Wobble is mainly a desk issue. But the dual clamps of the 8 model would offer even more stability. I get a bit of wobble if I jitter my leg. But once again that's because my floors transfer the vibration.
Im pulling the trigger on one today! excited to have a 2nd monitor in landscape for videos and email
can you stack the monitors with both type of arm mounts?
You can if you have sub 24 inch , but the hnds8 can no problem
@@BootSequence Oh alright thanks!
Would you recommend using this post to stack them?
If you can attach more to the post, the weak point is the desk. I would go up to 4. But you need a good thickness desk.
i want to ask something to make sure before i buy it. It holds 14 pounds each monitor or both monitor it must be 14 pounds ? I have two 24'' samsungs, Can it hold them ? Thank you!
Do the mounts come with the vesa screws?
Yes
So far you still recommend?
Still using the cheaper one on my personal display. And I do move it it around pretty often. Would 100% recommend. Go for the bigger option if you want more movement, but the smaller one I cant say a single bad thing. It's great!
What about the center pole HNDS8? What benefits does that format offer that the HNDS6 does not?
Much easier to stack the monitors on top of each other, and the possibility of using only one monitor for now and expand in the future. Plus, the HNDS8 can handle larger monitors.
what kind of arm do you recommend? I have two 27 inch monitors. The monitor arm with bar or the other one? The two from the video as an example. HNDS6 or HNDS8 😢
I use the hnds6 for my 2 27 inches. It's great. I'd recommend it. If, for any reason, you want to separate the screens a lot, hnds8 is good for that ! Link in description of you want , but you don't have to :).
I have a question! They state 2 32in monitors, but I was wondering if I can do a 34in and then another monitor sideways
As long as the vesa mount on the 34 inch fits and the weight is within spec it should work fine. Just not both in landscape
Will this specific monitor stand work for stacked monitors? 27” on bottom and 24” on top
Maybe, but I would go with the hnds8. That one for sure will fit them
Hi, my problem is how to be able to place two 32" monitors side by side horizontally, taking up as little space as possible inside the desk and no space outside as it is attached to the wall. Is possible to do such thing orienting both arms or upper arms all to the left or right?
ideally, you would go with 2 arm mounts. but the larger option does allow for dual 32 inches. its just not very flexible as in the will only be viewable in a very obtuse angle.
@@BootSequence Obtuse angle should be fine considering that the two monitor are curved and it could be useful to dispose them in a sort of arch shape..the only issue is how the baricentre could be maintained. Traditional configurations with arms take at least 30cm of desk..so i really need to place both arms parallel to the wall. I wonder if I could align monitor putting those arms in the opposite direction like "frog legs" instead of putting them in almost the same direction at the expense of the center of gravity...
Will the HUANUO Dual Monitor Stand connect to the ktc 32” curved gaming monitor?????
does anyone have an issue with a thick desk for the C clamp. My desk is almost 4 Inches think and cant put the C clamp around it.
Wait, you bought the S8?
Yeah! And with my own money 😂
Yeah! And with his own money 😂
How close to the wall can i push this ... righht now with my desk stand im 20Cm from wall ... will this increas it ?
no i have it and its like maximum 5cm
How many centimeters or inches needed for clearance between wall and desk?
For me, it was very tight. I could of scribed it. Its was 96.5 inches. Desk is 93 inches.
I have two different brand monitors 27”, is it possible to line up perfectly even if the size is slightly different?
as long as they are both 27 inch yes.
My Samsung monitors (T55) needs a versa adapter plate, will that adapter plate work with this mount?
Yes it will! It's a 100x100 adapter so no problems :). Hope this helps and use my link if you don't mind. It helps me a ton and won't cost you anything. If you have any other questions, I'm here for ya !
@@BootSequence awesome, thank you!!
Please i need help
Can someone tell me if there is any way i could stack a 34 inches monitor instead of 32 with a 27 inc monitor
with the dual gas spring arms ?? Or atleast help me choose a 34 inches monitor dual arm mount
thanks
that keyboard looking promising!
I have two 27 inch monitors and I need them to be 6 inches off the desk and a few inches forward since there's a raised part of the desk in the way. Does anybody know if the HNDS6 would be able to fit them?
I'll check tonight when I get home! I have 2x27 inch so I can test it out for you!
Forgot to answer, yes it will be able no problem! Just make sure you have some space between desk and wall!
@@BootSequence Great, thanks
@@BootSequence how many centimeters or inches needed for clearance between wall and desk?
Mine keeps tilling down that’s all it will do how I fix it
Do you mean falling down? If so, there's a Allen key spot at the back joint. Sticking the included Allen key and rotating counter clock wise, half a turn at a time and check if the monitor still falls
That's a nice setup but I didn't see any headphones! Your neighbors must love the bookshelf speakers though. 😂😂✌
My neighbors are family 😅
Heck,these are the 6 inch woofers... I'm planning on putting my 8 inch version on the final build.
But where are the news ?
the come back where there's news !
He bought them with his own money 🤓☝
Anyone know if Dell - S3222DGM 32" LED Curved QHD can mount on this arm? Thanks
not 2 of them, that would be too wide for s6. The s8 should be able to do 2 of them though. Might have to adjust the tensioner at the back though.
Do you mind sending me the one that you bought with your own money 😊
Sorry, it's on my gf's system!
I think the dog agrees.
The code isn’t working :/
As much as I’ve missed the regular boot sequence daily updates, I’m looking forward to this series you have planned
I have the pillar mount (you know the one you paid for with your own money 😂) for my setup and it’s really good holds well but only have one complaint about it….
That when you tilt the monitor downwards it looses the tension and the screen just faces the table and I have to retighten the tilt bracket again, you’ll have to let me know if you have that issue too
Otherwise the table mounting and arms are study as….
Love the flooring table great repurposing example
really ? That's pretty odd issue! Mine doesnt have that issue, have you considered reaching out to the manufacturer ?
@@BootSequence no never reached out to the manufacturer, I just put it down to something I did wrong when mounting the monitors or the 32” ultra wides is too heavy plus I only ever turn one monitor into a new position for when I split the two screens up into two independent gaming setups for the kids to play nice with each other and then back for when I’m editing or streaming with the second system
I never have need to tilt the screen, so when it does tilt down I just quickly tighten it back up and tell the kids to stop touching the screens
I’ve had the mount for a year or so will be pass the warranty
Would never go back to monitor stands again after have mounting arms, oh the three glory hole of shame put me in stitches
Neither. Tbh the best dual monitor arm setup is…. Two single arms. As someone who used to work selling these. Nothing beats the flexibility compared to these dual arm setup.
I could see that being good. I think I'll plan on 2 through hole mounts for the final desk build.
@@BootSequence if you have the space single arm is definitely the way to go! Tho if this works for you already. Just stick with it
I want a stacked monitor setup w/ PG27AQDM & Koorui 27E1QA (Both 27 in) would this support the weight of both or does anyone have other recommendations for these 2 monitors?
definitely support the weight. Theres an adjustment knob behind it to increase tension! if anything, going for the S8 version might be a better idea for greater mobility.
You can not stack with this mount
Ya true I bought the one with the pole . It’s aight but the freedom isn’t there . I can’t make it all the way back coz the pole . Good thing i can return it on Amazon.
Why do you keep saying you spent your own money? I think I heard it 5x in the 7 minute long video lmao
So people would comment about it and the video would get more engagement. Simple and effective!
@@BootSequence Do you really think that adds any benefit to the quality of the video? You could just hire some chick to talk about your content and you'd get much more engagement.
I mean you're commenting, so I guess that worked.@@QsPracticalNonsense
@@BootSequenceWell here's to hoping you get more "engagement" for the benefit of the video. Hopefully it's quality improves as a result, I wish your channel the very best!
In all honesty. I just wanted to make sure you knew I had purchased it prior and loved the product. Didn't want any bias from the "free product" part. I do think this product is amazing though.
Yo you bought that one with your own money?
Yeah! Back in 2020! 😂 And might I add, with my own money!
How can you review these two products without ever taking them out of the box?? Waste of time, I don’t need someone to spit out Huanmo’s marketing material back at me, I can read it all on their website fine
huh ? You can clearly see me use them in the video.... I test them, film from home , write my review, bring it to the office for B-roll and put them back in the box if they need to be inventoried, film the video, edit, post and if I like them, Ibring them back home for personal use. Dafuq are you talking about ?
Next time actually watch the video 😂😂
That's embarrassing, Hunter
yk youtube videos are for watching as well
Bro how does this comment show up at the top even though it’s a flat out lie. Some of yall are asleep
Gas spring arms are no good if you have a wall behind your desk.
You can always pull the desk away from the wall. It only needs 3-4 inches for the best result on a pair of 27 inch monitor. I just think the height adjust makes a huge difference.
@@BootSequenceI wish I had the room for 3 or 4 inches. There is a reason I have it right against the wall. Plus things tend to fall down behind if you got a gap at the back.
That's understandable.
This is a very basic info you can find shopping on the website. He obviously doesn’t use the products why you listen to him at all? He doesn’t talk about space requirements and long term use damage on his desk if any. This is useless.
Been on 2 of my office desks. I've moved them. If you have a cheap desk, yeah, it will damage it.
Thought your dog ate a bunch of ibuprofen :(
Perez Karen Jones Steven Brown Angela
Once again
Floor Desk lmfao
Taylor Jeffrey Clark Betty Jackson John
Дно - даже не распоковал, тупо коробки снял.
👌awesome job on the desk version 1 re-purposing the hardwood flooring. - @confidentgamers
Hopefully V2 will be cleaner! Im not wasting V1 Though, that's good wood!