Acura RSX Type S passenger side cv axle replacement
HTML-код
- Опубликовано: 22 янв 2021
- thank you for watching!!!!!
If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my RUclips channel on your social media. Links will be on the bottom.
#acurarsx #axle #jabothemechanic
venmo.com/code?user_id=265066...
www.paypal.me/urbanautomotive - Авто/Мото
Bro you video cut off
It's all about improving that k you for tutorial. I happened to have a big ass c clamp I wrapped it around the axle making sure not to touch the half shaft and then I hit the bottom of the clamp with a hammer
You would think the driver side would be more work because there's fluid to drop. I put grease too on the intermediate shaft to ease the install.
Damn your undercarriage is so clean
Which axle brand did you use and how is it holding up?
Will you be doing videos addressing intermediate shaft, intermediate shaft bearing, front wheel bearing, and axle seal replacement? I am currently dealing with a soft rhythmic knocking noise that feels as though it's coming from the CV axles and plan on replacing both axles but my dad has suggested I also inspect the oil seals that install into the diff/transaxle and the wheel bearings as well.
I have a wheel bearing video. On an Acura TL. Same as the rsx
I have a 04 type s the passenger side wheel is flush and the driver side is pushed in more coilovers came with the car, not sure what it could be
It doesn’t grab on to the thread on the out side part also it just spins any suggestions I got the cv
Question anyone we just changed our clutch in acura RSX the car is almost put back together likes 3 bolts in the passenger side Axel I need to know how to put those bolts on the Axel
At the beginning of your video you mentioned that the passenger's side is much more difficult than the driver's side. Why is that? And which part of the process is the more difficult part?
Because usually its seized inside the half shaft/intermediate shaft.
is the automatic cv axle the same as the manual ?
the axle my buddy bought seems top be alot shorter than the stock one we took off. Is that normal or did we just order the the wrong part? if so would you happen to have a part number?
I’m having the same issue! What did he end up doing? I have the oem part numbers but they have been discontinued
For some reason my axle keeps on spinning
That axle nut is a 32mm
Bro my axle was spinning even tho I tighten the nut on the axle
Question anyone we just changed our clutch in acura RSX the car is almost put back together likes 3 bolts in the passenger side Axel I need to know how to put those bolts on the Axel
that’s the half shaft, it has 3 bolts