You certainly built it properly Andy.!! 👍 👍 👍 That's a very good idea considering who you built it for.! 😁 I'd say "At least he can't drive it flat out into a concrete block" but knowing Kev, he probably could.!! 😉
Cool build, there is also commercial liquid that can make PLA waterproof. it works by submerging the print in the liquid, so it goes in between all the microscopical holes making it waterproof. On youtube there is someone who made a submarine that way.
It was great to meet you briefly today in Redfin Models Andy. Jack (7) was so excited because we watched Kevin’s video this morning with the 3D printed Jet Boat in 🚤 We’ve just subscribed to your channel and Jack wanted to watch the full build video 👍🏻 A 3D printer has just gone on my wish list 😂
Great job Andy have built the supersprint from a kit i bought on aliexpress as i dont have a 3d printer, would you be able to design a gopro mount for it if possible
Wow awesome boat and wow you no your stuff mega vid loved it :) keep em coming...oh and will you be taking out your giant rally car on a new vid ? At any point really wanna see that :)
Do you know if the A1 mini has a big enough bed to print this boat? Also, you said it was fully printed in abs but when you sliced it I saw it said you were using pla? I guess my question is would pla or petg work? Thanks Andy!
@@lowerstandards1740 well... guess i'll see lol, ah well, its what i have. thanks. perhaps i'll fit them down the sides, may have to just go a bit smaller than i wanted.
can i buy a boat like this from you? because i cant find boats like this on the internet i also dont have a 3d printer myself so if that possible i live in the netherlands
epic boat, thanks dude, appreciate it :)
hey 😅
No worries mate :)
DON'T CRASH IT. 😁 😁
Great job Andy, dont normally leave comments but your onto something. Keep it up 🎉
Thanks, will do! apreciate it
Came here from Kevin's channel. Thought you deserved a sub for putting up with him breaking your boats every time you go out 😄
You certainly built it properly Andy.!! 👍 👍 👍
That's a very good idea considering who you built it for.! 😁
I'd say "At least he can't drive it flat out into a concrete block" but knowing Kev, he probably could.!! 😉
excellent 3D boat build start to finished first ever
Very entertaining and detailed video, nice job Andy!😊👍
awesmon work andy some ppl dont appricate 3d printing enough and the time it takes, I'm sure Kev loved that as a gift. enjoy the bashing
Cheers mate, Yes lots of time goes into these as you know
Cool build, there is also commercial liquid that can make PLA waterproof. it works by submerging the print in the liquid, so it goes in between all the microscopical holes making it waterproof. On youtube there is someone who made a submarine that way.
well done mate, just printed one for my son and starting one for me!
Great job Andy
Nice work! Printed out an airboat and really like it. Looks like its time for a jet boat! Thanks for sharing!
Thanks for watching! and good luck with your build
Wicked boat! Love it, well done Andy. I wonder how much it would cost for a company to print that file off 🤔
I have always been interested in rc boats these are incredible
A lot better then then wooden rc boat I made as a kid
Wow This is so helpful! Thank you! I just subscribed to your channel.👍👍👍👍👍👍
Thanks for subbing! and glad you found it helpfull
I didn’t know so much went into building one of those Andy… wow!
Yea some of them there is a lot of work
Excellent instruction video! Thanks! I enjoyed watching!
Glad you enjoyed it!
Its a work of art , great vid!
Cheers dude
That looked great. Now I've gotta try it.
It was great to meet you briefly today in Redfin Models Andy. Jack (7) was so excited because we watched Kevin’s video this morning with the 3D printed Jet Boat in 🚤 We’ve just subscribed to your channel and Jack wanted to watch the full build video 👍🏻 A 3D printer has just gone on my wish list 😂
Ah hello, Yes was nice to meet you also and thansk for subbing to my channel. Hope you son likes all my content :)
Very cool build!
Thank you
Keep it up mate! Epic build
Epic build!
Cheers dude :)
All that beautiful work and your going to hand it over to Kevin oh my.
haha yea i am sure it will be fine
Ugh. I can smell that epoxy through my phone lol. Sweet build!
I've wanted a 3d printer ever since i seen the 1st boat that you made for Kev
Great looking boat Andy.
Thanks 👍
So glad I subscribed excellent Andy
This is Awesome 🏆
Epic Boat Andy! Thanks for the build review. I'm looking at that exact same 3D Printer and have it in my Amazon shopping cart!
Thanks for watching mate, They have a bloack friday sale on there website
@@RCANDY195 Thanks mate! I got the 20% off so it cost less than retail with 4 rolls of PLA Filament! Awesome!
Great job!
Thank you! Cheers!
Sweet vid man! Scared for the next one 🫣🤣
Just finished printing mine, onto the painting stage now, let’s see how it goes ??!!
I am sure you will be fine mate :)
Brilliant well done❤
Great job Andy have built the supersprint from a kit i bought on aliexpress as i dont have a 3d printer, would you be able to design a gopro mount for it if possible
Another ace vid! Thank you👊🏼
cheers dude
Very nice video
Thanks
looks cool
Beautiful
⭐⭐⭐⭐⭐
Andy you should have a go at a diy large format printer and scale these boats up! haven't seen that on the youtubes yet ;)
Hell yeah 40"or50" boat would be kickass..!!
Talented look absolutely awesome andy you an kev race now 👍
cheers mate
Wow awesome boat and wow you no your stuff mega vid loved it :) keep em coming...oh and will you be taking out your giant rally car on a new vid ? At any point really wanna see that :)
Cheers mate, I have loads mor eto do but not enough time lol
You definitely need to do a race buggy kit build
Will it be strong enogh though ?
Sehr schön erklärt Danke
Hi Andy great in detail video excellent! 👍 do you have a link for the ceramic bearings? Many thanks liked and subbed.
Those are Sweet..!! Great job Andy..!! 🤟👏 how much to print me a slider...?? 😂🤭😉
very cool. i need a filament printer, i hate my resin printer
amazing vid, whens the next vid of testing/racing them, will it be your channel or kevs. nice one. And do you sell these
there will be a running vid on both of our channels
@@RCANDY195 cool thanks, never seen a bash boat, didnt think it could be done, they look class
Propper cool
Andy have any experience with core xy 3d printer machines? some of them have room to print a boat in one go seems like they would be stronger.
Yea but they are a lot of money
What support settings do you use??? Maybe make a video explaining that. Please. Because my support always sticks too much and ruins the print.
Awesome i like both buddy does it take long to print and then put together and what’s the yellow tape on your finger lol
nice
Do you know if the A1 mini has a big enough bed to print this boat? Also, you said it was fully printed in abs but when you sliced it I saw it said you were using pla? I guess my question is would pla or petg work? Thanks Andy!
Plus I thought the A1 wasn’t even able to print abs?
great video , printing mine as we speak Where did you get the TPU gasket i do not see anything in the downloaded files.
On the jethub Facebook page in the files
What size battery would you recommend for someone using the same motor/ESC combo as you?
We ran mine on a 5000mah 4s and lasted ages, Even on a 3000mah 4s you would get 20mins easy
@@RCANDY195 Awesome, thanks! Working on printing mine now!
Nice for one more time .how much is the cost for the haul and the jet??filament and files???
Do you have a recommendation for a good printer for a 1st timer who is new to 3d printing?
It's called a bathing platform 😉
y'all got any of them running clips?
Yea Kev will be releasing a video soon and then i will after
the M-Jet35 can handle a much larger motor :) I'm going to try a 4082 1800-2000kv on 6s :D
Largest they suggest for these boats is a 4072, otherwise fitting the battery is quite difficult.
@@lowerstandards1740 well... guess i'll see lol, ah well, its what i have. thanks. perhaps i'll fit them down the sides, may have to just go a bit smaller than i wanted.
I love the idea and the desing but it's too expensive for me
From your experience, which boat is cooler, M-jet supersprint or bashjet?
ah man thats a hard one as they both have there place
How much filament does one boat take? Thanks
Around 2kg's
Can you do a review of your printer
The cost on the end was with electronics????theks
stl for the TPU seal?
Its on Jethub facebook page under the files section
Apologies if you’ve said it… but how much was the cost in total , with materials, components ?
Are we talking £600 or more like £300
more like $350 total
I don't have a 3d printer so is it possible to buy the 3d printed parts already printed.
Sure is.
Hi would I b able to print this all on a bambu a1 thanks
Yes you can!
What PLA+ brand do you use?
i was using ESUN PLA+
Can I buy one of these just a boat?
can i buy a boat like this from you? because i cant find boats like this on the internet i also dont have a 3d printer myself so if that possible i live in the netherlands
What about the people that Don't have a 3D printer ?
Get a job and buy one
We don't care about those "people"
Get a friend that has one
all looks a bit of a mare Yikes
Too much work
think id rather be on the bread line than have more money than sense
lol, you're full of it
@@mrb2917 thanks brains need that
@@mrb2917 thanks brains
@@Des-n8b get back on your meds you make ZERO sense