Van Conversion Build linear bearings
HTML-код
- Опубликовано: 8 фев 2025
- Van Conversion Build linear bearings
Van conversion DIY elevator bed
elevator bed
DIY camper van conversion from start to finish!
van conversion build step by step
van conversion build with bathroom
van conversion build series
80-20
80/20
80 20
sprinter van
sprinter 2010
Exactly what I needed. Like you I didn't want to pay a fortune for these components and so to see it can be self made is incredibly encouraging. I will 3D print the bushing as you suggest at the end. Thanks for sharing.
That’s awesome
Let me know how it goes. I don’t think you should have any problems with 3-D Printing. Those bearings at all.
Cad model link
GOOD JOB !! 😊
Thank you for the nice comment and thank you for taking time to comment. It is much appreciated.
2 years ago, I planned out my Van and to use 80/20 linear bearings. I was shocked at the price and now that I am building out a enclosed trailer instead, I'm moving my ideas over. This will be very helpful and saving a lot of money. As I'll be using this for my bed idea also. Thank you. liked and subscribed
My plans have changed. I was going to build out a sprinter van and a couple weeks ago. I bought a Winnebago view with a sprinter front l
Thank you for taking the time to comment. Much appreciated.
Ray
@@shopandmath ahh I see, Nice! Have fun with that!
Great video, good information. I am strugling with making a table saw fence, using aluminium extrusions and sliding carriages. The cost is just unbelievable, at least for the carriages, weather they are nylon slides or V grooved wheels rolling along round bars. Thanks again, very nice.
I understand the cost and how much inflation is going up
Keep looking And let everyone know what you’re looking for because somebody might have it sitting around and they’re not using it. This is the way I trade with my friends to keep cost down on projects.
Wish you all the best happy building
They look great. Im looking for 2 sets. Maybe 4
Ray, excellent decision and as soon as I heard you say $500 (after seeing prices on 80-20)...I'm with you 100%. Question: (if you are still connected) have you considered a square tube L-bushing assem? My thoughts are for the extra strength. Do you sell bushings?
i’m kind of cheap and I like to use stuff that I have readily available or build something from scratch
I don’t make stuff to sell
this project build is on the back burner. I recently acquired a Winnebago view.
Looking forward to seeing how your are going to be builing this van out!
I am as well
Hard to build out something I don’t have yet but I’m working on it
I like what you did here because I need to make the same thing but I would hung them on the ceiling for a music studio to attach mics, lights & cameras, avoiding to use tripods that take a lot of space… I be interested to buy from you if you are going to make the 3D printed… I would install them into a 4040 size and I would buy at least a dozen, thank you!
What do you think would be the max spacing between bearing blocks? Thinking of doing something like this in the pass thru storage area of my camper.
It depends on the amount of weight. Keep in mind if it’s in a camper you also have to include the G force, unless it’s pinned.
What is the size of 8020 you’re going to use?
That in itself also flexes
If you want to send me an email with your idea and I can give you a better opinion
My original idea, or concept was to make a bed with a Connecticut energy lift
But I decided to buy a Winnebago instead of doing the full van conversion. It is a long story.
Ray
this is exactly what i needed to see as i needed a linear bearing for a non weightload application... i can prob 3 d print the whole job
'thx for the inspiration
You’re welcome and thank you for taking the time to comment. It’s much appreciated.
Ray
Did you ever make the kinetic lift? If so, do you have a video of it?
The van I was purchasing fell through, and I was looking for quite a while for a new van, and I decided to get a Winnebago view
unfortunately, that bed lift is not required in this type of unit
thanks for the inquiry
ray
But they say on the site that these linear bearings can only take compressive loads not hanging loads. Won't these linear bearings fall out?
They can take a sheer load depending on the type of plastic, but she machine them from
The style of bearing is recommended for guiding loads. They don’t really hold any weight
@@shopandmath is there an email I can send you? I want to ask if you think my linear bearing would take a 2 pound load.
Any updates on this project or your van build?
i’m updating or making a Winnebago view a little bit nicer I bought a used one 2007 with a Mercedes front so basically it’s a Mercedes sprinter van 3500
I have tons of footage but I haven’t made any videos yet. I have made tables also 3-D printed some brackets, some Laser art, camera systems, etc..
Thanks for inquiring. If you have any questions and I can help you let me know.
Hey bud, what happened to the motor video? I can't find it anywhere and ingested in this one :o
When I started planning on this Van build I how to deal to purchase a sprinter van at a very very low price and the deal kind of fell through so I ended up buying a Winnebago view, which has the front end of a sprinter and a Winnebago back
There was never going to be a Motor I was going to use kinetic energy to raise and lower the bed in the form of the spring a garage door spring. I still might make this, but I need a place to install it.
Ray
@@shopandmath oh I get you, thats brilliant! I wondered what kinetic meant, sorry if you said in the video :) can you speculate why people don't use motors? I think I may be naive thinking appropriate wire would cost a tenner gbp and the motor £20 as, say, an ebay windscreen wiper motor. I've thought on it for years and can't think where there might be flaws or hazards in the system; as steel stretches, the
Hi. I’d be interested in purchasing some printed slide guides
what plastic did you use, teflon, nylon or UHMW?
The plastic I would’ve preferred was UHMW
But it was either nylon or poly propylene
The plastic was free if I were to make more bearings I would probably 3-D print them
Ray
@@raysfix what plastic would you 3d print? nylon or peek?
PLA with at least 70 or 90% infill.
I would also design it so the core has some type of bolt through the inside.
@@shopandmath pla might not do the trick people have issues with pla in hot vehicles. Petg minimum, but I think peek, while more difficult to print, will self lubricate
@@81GTUN4
If You’re using this bearing as a squish not as a pull or push PLA should be good
With the bolts protruding through into the extrusion, but still covered with plastic is the safety
If you’re somewhere closer to the equator, I am in Ontario Canada we don’t get that hot up here. It could be an issue with a full melt.
Some of these other materials are difficult to use , but since this is construction, not art, it should be fine
Do you have this material already or are you going to order it?
If you have it maybe do a little test if you do let me know what works best and the failure temperature I could use that knowledge.
Thank you for your input.
Ray.
Did you buy all the aluminum parts off the shelf? Source?
We're just in the tear-down phase of our build. Gutting out the old stuff and starting from scratch. Not entirely sure what we're doing for our bed solution yet. Would like to be able to raise it to accommodate a scooter or small motorcycle, but don't know if that's realistic. Following!
I made all of those parts
It can be purchased but
It’s $500 plus tax and I didn’t wanna spend that especially when I could make it easily
@@raysfix You built the extruded aluminum?!! Did you mill the angle brackets or buy a length of it and cut to size? More details please!
@@pandavanlife9042
Everything was cut
The angle is 1 1/2“ x 1 1/2“ by quarter inch thick
Are used to Lankes of 6 feet I also made smaller angles for doing the corners but it’s not shown in the video or used in the video
The flat plate is quarter by 3 inch and I cut it into 5 1/2 inch Length
The plastic is milled it was from just whatever we had laying around in the shop largest sheet proximately 3/4 of an inch thick probably by 1’ x 1’
All of the fasteners are 1/4- 20 stainless steel
The three back fasteners should be switched out from hex head to a countersunk socket head caps screw
Well done! But you can see why these parts are so expensive. To have a machine shop makes these units you'd be better off coughing up yr hard earned cash & just buy them!!
first off thank you for taking the time to comment. It is much appreciated.
I have a super cost savings way of producing these bearings by simply using angle brackets and 3-D Printing the bearing itself
From 1 kg of 3-D Printing material I could probably make at least 20 bearings out of cost of around $30 for the roll
A flat piece of aluminum in two angles, and a couple of screws. If you don’t have a shop to do this, you could go to a place like the Steele store. (this is a local place close to me.) and they would cut the material to size for you for a small fee per cut. I’m guessing you could probably produce these bearings for around $20 each,
I hope that this helps, and there’s nothing wrong with saving a couple of dollars here and there just as long as everything we do is safe
Ray
Fantastic solution vs $500 for skimpy manufactured bearings. Instead of 2 rails and 4 bearing, my thought is to use 2 long bearing (more contact)...now all I need is a $10k milling machine🤣 I wonder how much to have the UHMW machined?
You should buy just linear bearing pads. It's not worth machining pastic, aluminum is a different story These pads cost about 3 $ a piece max (at 80/20 which is the most expensive), they are made to exact dimension with the right material and are super smooth.
I have a hard time believing that anything associated with the 8020 is only three bucks that’s a hard pill to swallow when I did my research I didn’t find anything if you could provide everybody with the link that would be awesome. Can you get it on Amazon?