It was with tough black paint. It wasn’t very tough! 😂 also, after painting that and looking at the engine, it didn’t quite work well. So, needed redoing with engine out and powder coating to make it last.
@@8713Thomas It worked well on my old bikes swingarm, maybe sealing it with a clear coat would have done better for you. I used it without clear coat, and on some other parts without issues, maybe it didn't go down well for you for some reason, could be many. I painted straight onto the etch primer after a 15 min flash, not drying and sanding, you will have to let the base coat totally dry and cure, before lightly sanding and applying the clear coat, regardless to what the can says. The original colour is paint and can get it from rs bike paints.
@@8713Thomas Oh right don't think you shew that you used a clear coat, or I didn't notice lol. The primer could be the reason, so many that can cause the paint not to hold, I really like the Simoniz paints, easy to use.
Could you tell me where you can’t hear me? I’ve checked and checked again and I was pretty happy with the results. Hope you have a great start to 2022!
@@8713Thomas As I told you, you only hear the part where you put the music on. But when you talk, explaining and describing something, the audio is silent.
Well Tom. When you painted frame the last time was it a good job or did it wear well???? It looked the part
It was with tough black paint. It wasn’t very tough! 😂 also, after painting that and looking at the engine, it didn’t quite work well. So, needed redoing with engine out and powder coating to make it last.
@@8713Thomas It worked well on my old bikes swingarm, maybe sealing it with a clear coat would have done better for you. I used it without clear coat, and on some other parts without issues, maybe it didn't go down well for you for some reason, could be many. I painted straight onto the etch primer after a 15 min flash, not drying and sanding, you will have to let the base coat totally dry and cure, before lightly sanding and applying the clear coat, regardless to what the can says. The original colour is paint and can get it from rs bike paints.
@@HalfdeadRider I didn’t use etch primer. Just grey primer! That’s what it probably is! Haha I did use clear coat though
@@8713Thomas Oh right don't think you shew that you used a clear coat, or I didn't notice lol. The primer could be the reason, so many that can cause the paint not to hold, I really like the Simoniz paints, easy to use.
Too bad for the video, that in the part where you speak you can not hear anything. Anyway, first like the same. Happy 2022! Hello! ;)
Could you tell me where you can’t hear me? I’ve checked and checked again and I was pretty happy with the results. Hope you have a great start to 2022!
@@8713Thomas As I told you, you only hear the part where you put the music on. But when you talk, explaining and describing something, the audio is silent.
There is audio, it’s just a bit quieter. Need to pump up the volume, the go pro microphone isn’t the best.
@@8713Thomas Well, what to say ... I don't hear anything even when the volume is turned up. In your previous videos, he feels great when you talk.
@@t20f70 haha thank you! I hate my voice… I don’t know what’s happening, I have audio on my phone and laptop.