Just used this video to install a red button in my E81, my very first mod! Thank you so much mate! Was so detailed and showed every step!! The wrap looks amazing so I’m going to order some and do the same in mine haha Instant Sub from me mate, any mods I want to do from now on I’ll be using your guide
Good job on wrapping it Mate, I did mine as well but because my original start stop isn't the same as yours. The outer bottom is slightly visible which doesn't look good. I decided to just plastidip mine with matte black as I was wrapping it with matte black anyway. So mine is matte black outer ring with red start stop button.
I managed to get off only the outer ring first, and then the inner part what you take the button to replace off of... The chinese PoS had a tad smaller clips, so had to play around with it, but managed to do it in like 5mins... red button looks awsome :)
Watched your video and now have the confidence to do it for my convertible. Just ordered a used start stop switch from eBay for £10. I'll wrap that and add my red cover (from Aliexpress.com) then if I haven't messed the dismantling and wrapping process up I'll swap them over. And advertise the old one on eBay !!
you should order a new bezel and rattle can it black then wrap it that way you don't need to inlay the inside as it will be black and you'll never see if it has a pattern on it or not
Hiya mate, quick question need a bit of advice!? I’ve wrapped my bezel the carbon fibre like you, but when I put it back onto the start stop button it just pushes off it. It’s like the bezel hasn’t fully clicked in but there’s no wrap on the inside and it seems fully pushed in?!?! Need help thanks pal
@@CARLISONIT yeah the bottom left one snapped off when taking it out, but I thought it would just effect that corner not the whole bezel as the other 3 are in tack☹️
Live the video, car and channel but the contrast seems to be super high and the footage seems blurry! Not sure why but I thought you should know anyway
Thank you! Yeah I think there was too much direct sunlight going into the camera but i’ll look into more so I can make it better thanks for letting me know 👍🏾
It’s a wrap here’s a video I did on it with a direct link to the wrap Vinyl Wrapping a Car Key In Carbon Fibre ruclips.net/video/sPaXhLQSZc8/видео.html
I never liked altered emblem colors & the blue & white is the state flag of Bavaria where I'm from & where the car is manufactured. I either delete badges, or keep original/functional appearance ie: real carbon fiber if needed. Blacked out badges are OK on some vehicles like Audi's or Mercedes & in Germany you'll see many that remove the Audi emblem from the trunk lid giving it more of a smoothe unobstructed sleeper appearance. If I add a diffuser or body panels to my red E82 they will be gloss black to match the factory gloss on the side pillars & mirrors to give it more contrast. The red start stop with the chrome deleted does look more interesting though & this is a good tutorial for disassembly.
̈ Yeah I get your opinion and that’s perfectly fine everyone has their own choice and preference of what they like and don’t like but personally I like it this way but I fully understand you 👍🏾
Medino😈 yeah it tore abit because of the hole I cut in the middle could have been alot better but I had to rush to go somewhere so will be redone but thanks 👍🏾
TheCityInk there’s a direct link in the description on this video Installing BMW Wheel Centre Hub Caps & Wrapping Bonnet & Boot Badge Emblem in Carbon Fibre (Part 2)
I am brand new into the BMW world. Just got myself a 2008 120d coupe and you are the BEST RUclipsr for this kind of stuff. Thank you mate!
Christian Castro Nice one! And thank you mate! 👍🏾
The detail you give is fantastic, looking to replace my button as the writing has worn off, so helpful once again.
I kinda like the original button, I guess it's a matter of taste but I like how you learn about your car by getting involved, it's inspiring
David Viner Yeah definitely a matter of personal preference and yeah it’s nice to learn something new about the car each time 👍🏾💯
Just used this video to install a red button in my E81, my very first mod!
Thank you so much mate! Was so detailed and showed every step!! The wrap looks amazing so I’m going to order some and do the same in mine haha
Instant Sub from me mate, any mods I want to do from now on I’ll be using your guide
Recently got a E88 and been watching your videos. Very good and clear. Gave me a few ideas. Keep up the good videos
Craig Taylor Nice one thank you and will do
These videos are so helpful thank you.
Myles No worries 👍🏾💯
Good job on wrapping it Mate, I did mine as well but because my original start stop isn't the same as yours. The outer bottom is slightly visible which doesn't look good. I decided to just plastidip mine with matte black as I was wrapping it with matte black anyway. So mine is matte black outer ring with red start stop button.
mjojr jr thank you mate, nice one and good compromise 👍🏾💯
my guyyyyy...nice video bro
the carbon fibre came out nice
Leroy Thank you bro! Yeah it looks so much more better 👊🏾💯
It's coming along real nice bro! Keep up the good work 👊🏼
Ahmed A thanks bro I appreciate it! 👊🏾💯
Well I have to say you earned yourself another sub ! Straightforward & useful videos. Keep it up 👌🏽
B B Hey thank you I appreciate it! 👍🏾💯
I managed to get off only the outer ring first, and then the inner part what you take the button to replace off of...
The chinese PoS had a tad smaller clips, so had to play around with it, but managed to do it in like 5mins... red button looks awsome :)
Watched your video and now have the confidence to do it for my convertible. Just ordered a used start stop switch from eBay for £10. I'll wrap that and add my red cover (from Aliexpress.com) then if I haven't messed the dismantling and wrapping process up I'll swap them over. And advertise the old one on eBay !!
Richard Page Nice one! 💯
you should order a new bezel and rattle can it black then wrap it that way you don't need to inlay the inside as it will be black and you'll never see if it has a pattern on it or not
mike guffei Great idea 👍🏾💯
Great job
very helpful video
thanks
Parabéns pelo tutorial. Muito bem explicado!
Love that
Love your videos mate, have my subscription! Keep ONIT
Thank you mate I appreciate it! 💯
The emblem on the steering wheel, is that the cover sticker or a new emblem?
ruclips.net/video/LECi0XYmwbs/видео.html 👍🏾💯
All in all a good job but could use a table instead of a sofa!
Hey Carl can you do a Video on how to prepare your car for Winter?
Max Schubert Yeah sure i’m gonna get all the big videos out first then i’ll do that 👍🏾
Yo bro where did you find that steering wheel emblem. I can't find them anywhere for my 128i e82
Hiya mate, quick question need a bit of advice!? I’ve wrapped my bezel the carbon fibre like you, but when I put it back onto the start stop button it just pushes off it. It’s like the bezel hasn’t fully clicked in but there’s no wrap on the inside and it seems fully pushed in?!?! Need help thanks pal
Ben George it sounds like you may have broke a tab try taking it out and double checking
@@CARLISONIT yeah the bottom left one snapped off when taking it out, but I thought it would just effect that corner not the whole bezel as the other 3 are in tack☹️
Just done the same yesterday on my E87 M, Red button and 4d carbon wrap, if your on the fb 1 Series page it's on there, came out mint 👌
Chris Marsh Nice one and no i’m not on there, did you order the red button from the link?
@@CARLISONIT No, well got it off eBay from China for 3 quid.
You should join and add the RUclips vids
Chris Marsh Ahh ok! And yeah soon i’ll join the group 👍🏾
Lads join BabyBMW.net it’s all 1 series and 2 series guys and it’s a really helpful community
Nice, Thanks man.
Mustafa Sahel no worries 💯
How can I order it in dollars through amazon seems I can’t find it
I’ve left a direct link in the description
Live the video, car and channel but the contrast seems to be super high and the footage seems blurry! Not sure why but I thought you should know anyway
Thank you! Yeah I think there was too much direct sunlight going into the camera but i’ll look into more so I can make it better thanks for letting me know 👍🏾
Have you considered red seatbelts? I found a German site that ships them...
̈ Yeah i’ve been thinking of that for some time but instead i’m thinking dyeing the belt red soon 👍🏾
@@CARLISONIT got aluminum foot pedals...?
̈ Nope i’m debating whether it’s worth it?
Is this button valid for the BMW E92?
yeah it’s valid for the E92 👍🏾
Where did you get the key fob cover?
It’s a wrap here’s a video I did on it with a direct link to the wrap Vinyl Wrapping a Car Key In Carbon Fibre ruclips.net/video/sPaXhLQSZc8/видео.html
I never liked altered emblem colors & the blue & white is the state flag of Bavaria where I'm from & where the car is manufactured. I either delete badges, or keep original/functional appearance ie: real carbon fiber if needed. Blacked out badges are OK on some vehicles like Audi's or Mercedes & in Germany you'll see many that remove the Audi emblem from the trunk lid giving it more of a smoothe unobstructed sleeper appearance. If I add a diffuser or body panels to my red E82 they will be gloss black to match the factory gloss on the side pillars & mirrors to give it more contrast. The red start stop with the chrome deleted does look more interesting though & this is a good tutorial for disassembly.
̈ Yeah I get your opinion and that’s perfectly fine everyone has their own choice and preference of what they like and don’t like but personally I like it this way but I fully understand you 👍🏾
I’ve wrapped my aluminium bits on the dashboard in carbon blue the handle black.btw mine is white next job I’ll do is the caliper (blue)
valerio pilla Nice one that’s a good colour combo 💯
Ke bumbar
Btw it seems easy but it’s not
valerio pilla 100% true 😂💯
I know because I have done mine as well n my daughter ruined the steering wheel by putting some wrapping on it 😡😡😡😡😡she said like that you remember me
valerio pilla aww man 😫
That must have been annoying!!
CARL IS ONIT i was really pissed off.
Luckily was my daughter (5yrs old) imagine was my wife I would have driven her car like a rally one😎😎😎😎
CARL IS ONIT now it’s a pain in the ..... to fix it 😡😡😡😡
Awful wrapping.You can still see some silver,but a good
educational video.
Medino😈 yeah it tore abit because of the hole I cut in the middle could have been alot better but I had to rush to go somewhere so will be redone but thanks 👍🏾
Where can I find the red/black badges like on your steering wheel?
TheCityInk there’s a direct link in the description on this video Installing BMW Wheel Centre Hub Caps & Wrapping Bonnet & Boot Badge Emblem in Carbon Fibre (Part 2)