What an awesome system with so much simplicity along with convenient compact design. I'm located in Fort Mill SC so I'm looking forward to meeting up and getting info for purchase
Greetings Gentleman Happy New Year. I asked you where you bought the X6 Pump? Tremendous force and pulling distance. And thank you very much for your information. I am from Puerto Rico and I am about to make my Soft Wash System but I need to continue learning. Thank you very much.
This was 2 years ago and I am wondering if you still suggest the X6 for the cost? Right now I am using the removing fatboy but I need to get 3-4 stories for washing a Macy’s store at a mall- is this the answer ?
What kind of GPM and PSI are you seeing out of that 440? Any issues with it? Also what size buffer tank are you running, or was this thrown together for the demo? I really like the compact footprint of everything
@@NomadGuardian its dependent on they style and tempo of the washer....but typically as a general rule i recommend a rigg to have minimum 100 gal water for every person spraying on a rigg.
Great system Keen to see final product Just wondering if remote control to switch between spray and rinse is possible May look at getting one to Australia if you ship Cheers
Hey Garry, im wrapping the first AUS bound system this week....ive had a ton of requests but until we had some good runtime on the systems and pumps to see how well the longevity and performance is i have been holding back on builds and shipments to AUS...starting next week start getting systems headed that direction!
I have not listed it up for sale on there. It's not a full release item...i am working the one for the x6 is done...im still tweaking and porting one for the standard 12v..the one for x6 does work but i feel it can be better...
@@freedompowerwashingllc6199 Awesome. I’m in eastern nc. Feel free to contact me when you need a field tester. I’m sure everyone says that but I will give it a good run!
Can you explain this in the simplest lemans terms please? I'm a bit lost as to what this is? I run a 12v pump to apply soap currently and use my power washer to rinse
Hey Justin...the x6 is the newest high performance 12v on the market right now....DPI is an interface device which allows the 12v to be used as a stand alone 12v or you can tie a pressure washer into the system and allow the 12v to work with the pressure washer together and get high flow rates and high mix ratios 6% and more!
Can we upgrade our current 12v systems to just the X6 with 2 12v batteries? Also see there going to be making an X3, x4, and X5 which if they get the same distance might be better suited for residential.
X6 is a raw pump same as 3, 4, 5 and 6...all of the x series essentially have the same parts in the head but they change the cam ratio for different flow rates..also there are different motors for achieving certain pressures...pumptec can get you a byoass kit where you run the pump non stop....i developed the digital oressure controller for it to make it like every other 12v plus the added benefit of being able to adjust the pressure on the fly...we are working on getting the pump ready for you guys to be able to get the as a "self install kit" because allot of people already have their manifolds boxes...etc...
@@Skill_Issue92 it will be up to you...run bypass and have to let the pump constantly run...this can really only be done on batch mixing...or get it with the pressure controller for on demand operation.
@@freedompowerwashingllc6199 pressure controller sounds like the only way to go for me haha. You have a ballpark on pricing yet or still working out the details?
@@Skill_Issue92 raw pumps are 1800..with pressure controller is 2300 plus ship...the pressure controllers have a few hundred wrapped up in parts and supplies thats why they seem expensive...but others tried the less expensive way and it seemed to have allot of failure points (what i saw as an outsider looking and and hearing some feedback).
Running chemicals through a pressure washer will tear it up most likely pretty fast...your better downstreaming and thats still considered "softwashing" but mix percentages arent as high
@@joshuarewerts8566 hey josh im on messenger or you can call direct...there are allot of different options without going back and forth on youtube i can give you figures depending on what your looking for and trying to do.
Hey Mike im still wrapping up testing...i want this to work with the 5.5 to 8gpm range and be able to offer multiple pump options...so im currently working on box base prices with the different modules as add ons...DPI module, remote soap/rinse..etc...my box builds range from 2900 to 5500 depending on all options. If things line up right i may be able to offer a 2k budget box with DPI..im also working on a 7hp gas motor softwashing specific design..
@@crystalclearwindowsllc awesome...i would say dont fix whats not broken...it sounds like you are batch mixing...allot of guys get years batch mixing...its the blend manifold setups that are the biggest killer on those pumps..some people only wash part time..allot of variables and in the end were all doing what we think will work best for us...keep rocking on!
@FreedomPowerWashingLLC I have the Midwest mixer now but only the last 3 mos but still no problems what I don't have is the remote part of that system so I am still adjusting on the fly
The pump is kind of loud...when the door is closed its pretty quiet...once the pressure washer is on...its just loud...our microphones are probably not helping on the phones
How much are the XPVC-6 pumps going to cost? Your double eagle video looks like it works just as good as the single X6 at probably a fourth of the cost. Just sayin'........Change my mind, maybe?
Hey guys Following the stream, i changed the description from gas roof pump killer to alternative mainly because the truth is allot of people have found allot of success with the gas pump...also allot of people have found allot of frustration as with any equipment....i am excited to say we can now use a 12v and now truly be able to deliver comparable performance kind of like "hold my beer and watch this!". Remember guys my goal is to help develop/deliver solid equipment..to the marketplace ive had the on the job frustrations no different than everyone else. When i used the term AR 45 i was not trying to slam them or the product but use the term more for an example....one thing that the gas diaphram companies cannot be held liable for is these pumps were bever designed to have the bypass reconnect to the intake in a closed loop fashion but as an industry weve found we can quasai make it work...the same concept as blend manifolds operating on the intake of a pump to blend chemicals is crazy to the rest of the world but weve seen success there too...have a great day guys and stay warm!
Gotta combine the pressure washer in with the 12 volt...the ar45 doesnt hold up to SH ive gotten a ton of calls from people who only ran them a few months and the bleach tore them up...ive always been a 12v guy...just trying to deliver a solid long lasting product...how long have you been running your GRP?
Hey jim youre right..ill try to find a microphone system that works on the next video...im not a big youtuber or anything and not trying to be just trying to have a way to show people what im working on and offering...thanks for the heads up.
What an awesome system with so much simplicity along with convenient compact design. I'm located in Fort Mill SC so I'm looking forward to meeting up and getting info for purchase
Looks like an awesome piece of equipment! Great video. Interested to see how this progresses.
Cant wait to get mine set up brother 💯
Jimmy’s a solid dude and very smart 🤝💪
Been following this for a few months now and glad to see this update video. Looking forward to seeing your website.
Love it! I live near Cherokee NC; glad I found your videos!
I need one of these. Been watching Joe D run one for a while
Greetings Gentleman Happy New Year. I asked you where you bought the X6 Pump? Tremendous force and pulling distance. And thank you very much for your information. I am from Puerto Rico and I am about to make my Soft Wash System but I need to continue learning. Thank you very much.
Great ideas! I'm looking forward to trying the new system.
Thanks, let me know when youre ready.
What type of tank are you connected to and do you sell them too
Jimmy you are definitely gonna be the talk! Your way too smart man!
Just a monkey with toys...thank you for the compliment.
I have this pump and trying to figure out a control mechanism. Any advice?
This was 2 years ago and I am wondering if you still suggest the X6 for the cost? Right now I am using the removing fatboy but I need to get 3-4 stories for washing a Macy’s store at a mall- is this the answer ?
What kind of GPM and PSI are you seeing out of that 440? Any issues with it? Also what size buffer tank are you running, or was this thrown together for the demo? I really like the compact footprint of everything
Like to see a bucket test to confirm that it does nearly double the out put.
And can the engine charge thr batteries when ruining?
How are you running the 12v with the gas pump? I'm confused
I like this setup
Thank you...i try to do new stuff and keep things compact as possible
@@freedompowerwashingllc6199How big of Buffer tank needed for this setup?
@@NomadGuardian its dependent on they style and tempo of the washer....but typically as a general rule i recommend a rigg to have minimum 100 gal water for every person spraying on a rigg.
Great system
Keen to see final product
Just wondering if remote control to switch between spray and rinse is possible
May look at getting one to Australia if you ship
Cheers
Hey Garry, im wrapping the first AUS bound system this week....ive had a ton of requests but until we had some good runtime on the systems and pumps to see how well the longevity and performance is i have been holding back on builds and shipments to AUS...starting next week start getting systems headed that direction!
Where can I purchase the dpi module? I cannot find it on your website.
I have not listed it up for sale on there. It's not a full release item...i am working the one for the x6 is done...im still tweaking and porting one for the standard 12v..the one for x6 does work but i feel it can be better...
@@freedompowerwashingllc6199 Awesome. I’m in eastern nc. Feel free to contact me when you need a field tester. I’m sure everyone says that but I will give it a good run!
Is your hose 5/8 craftsman
Can you explain this in the simplest lemans terms please? I'm a bit lost as to what this is? I run a 12v pump to apply soap currently and use my power washer to rinse
Hey Justin...the x6 is the newest high performance 12v on the market right now....DPI is an interface device which allows the 12v to be used as a stand alone 12v or you can tie a pressure washer into the system and allow the 12v to work with the pressure washer together and get high flow rates and high mix ratios 6% and more!
Can we upgrade our current 12v systems to just the X6 with 2 12v batteries? Also see there going to be making an X3, x4, and X5 which if they get the same distance might be better suited for residential.
X6 is a raw pump same as 3, 4, 5 and 6...all of the x series essentially have the same parts in the head but they change the cam ratio for different flow rates..also there are different motors for achieving certain pressures...pumptec can get you a byoass kit where you run the pump non stop....i developed the digital oressure controller for it to make it like every other 12v plus the added benefit of being able to adjust the pressure on the fly...we are working on getting the pump ready for you guys to be able to get the as a "self install kit" because allot of people already have their manifolds boxes...etc...
@@freedompowerwashingllc6199 oh okay so if you ran just the raw pump you would need a bi-pass? Can't wait to see what you've got when it's ready
@@Skill_Issue92 it will be up to you...run bypass and have to let the pump constantly run...this can really only be done on batch mixing...or get it with the pressure controller for on demand operation.
@@freedompowerwashingllc6199 pressure controller sounds like the only way to go for me haha. You have a ballpark on pricing yet or still working out the details?
@@Skill_Issue92 raw pumps are 1800..with pressure controller is 2300 plus ship...the pressure controllers have a few hundred wrapped up in parts and supplies thats why they seem expensive...but others tried the less expensive way and it seemed to have allot of failure points (what i saw as an outsider looking and and hearing some feedback).
Nice piece of equipment. What is a ballpark price for the unit?
There are so many flavors and options im still dialing everything in....
Hi good day I'm Learie from the Caribbean I'm interested in doing soft washing can a pressure washer using a bypass softwash a house or roof.
Running chemicals through a pressure washer will tear it up most likely pretty fast...your better downstreaming and thats still considered "softwashing" but mix percentages arent as high
Looking forward to this. Seems to be a very compact system. I already have a 6.8 GPM running off of a Predator 420. Adding the X6 would be awesome
Hopefully when the x6 fully releases...date unknown...we can get you hooked up.
@@freedompowerwashingllc6199 ballpark, what should the total be?
@@joshuarewerts8566 hey josh im on messenger or you can call direct...there are allot of different options without going back and forth on youtube i can give you figures depending on what your looking for and trying to do.
Any idea when the box will be available and rough idea on the cost?
You are the mad scientist
Brothah you just flipped the industry on its head! Nice setup!!!
What is the psi in coupled mode?
Your set up is very good, where can I buy it and how much does it cost? please send me the information.
What's the cost of x6 put together
Pretty impressive! Will you offer/do a remote rinse option on the x-6?
Yessir...remote with feedback and an automatic 3 way...im working on the website now and the base price of the box will have add ons...
I already have a 6.3 pressure washer. How much for what I would need to pair it up with it?
Hey Mike im still wrapping up testing...i want this to work with the 5.5 to 8gpm range and be able to offer multiple pump options...so im currently working on box base prices with the different modules as add ons...DPI module, remote soap/rinse..etc...my box builds range from 2900 to 5500 depending on all options. If things line up right i may be able to offer a 2k budget box with DPI..im also working on a 7hp gas motor softwashing specific design..
How much did you spend on that total system betcha over 3500 where my AR 45 gas pump only cost Me 1800
That's good for you! How long have you been running?
@FreedomPowerWashingLLC 2years no problems at all
@@crystalclearwindowsllc awesome...i would say dont fix whats not broken...it sounds like you are batch mixing...allot of guys get years batch mixing...its the blend manifold setups that are the biggest killer on those pumps..some people only wash part time..allot of variables and in the end were all doing what we think will work best for us...keep rocking on!
@FreedomPowerWashingLLC I have the Midwest mixer now but only the last 3 mos but still no problems what I don't have is the remote part of that system so I am still adjusting on the fly
Nice system! I am Looking to upgrade so hopefully i can get this!
Nice job Jimmy!
Thanks.....it been a ton of trial and error..
Are the pumps out yet?
They are
What's the combined psi when running the pressure washer with the x6?
Were around 140 psi
Wow..... 👏 👏 👏 super impressive!!
How much for this system
Holy Crap my eardrums!! That thing is LOUD. Was it the door being open that made it so loud? Was the door rattling?
The pump is kind of loud...when the door is closed its pretty quiet...once the pressure washer is on...its just loud...our microphones are probably not helping on the phones
Nice setup! 👍
Thanks
How much are the XPVC-6 pumps going to cost? Your double eagle video looks like it works just as good as the single X6 at probably a fourth of the cost. Just sayin'........Change my mind, maybe?
Hello are you near 176 and inman?
Yep
How can you be contacted, interested would like to discuss
My # 864 485 9309
😮😮😮 I haven’t started yet but I
Want one lol
I’m ready
Awesome
How far are you shooting with both systems?
I sprayed a p40 today...i would put them neck and neck..
What size hose are you using?
@@michaellaserre1624 5/8 sir!
My Pump is on the way
Its a good pump...make sure to run 2 batteries...it draws some juice..
Hey guys Following the stream, i changed the description from gas roof pump killer to alternative mainly because the truth is allot of people have found allot of success with the gas pump...also allot of people have found allot of frustration as with any equipment....i am excited to say we can now use a 12v and now truly be able to deliver comparable performance kind of like "hold my beer and watch this!". Remember guys my goal is to help develop/deliver solid equipment..to the marketplace ive had the on the job frustrations no different than everyone else. When i used the term AR 45 i was not trying to slam them or the product but use the term more for an example....one thing that the gas diaphram companies cannot be held liable for is these pumps were bever designed to have the bypass reconnect to the intake in a closed loop fashion but as an industry weve found we can quasai make it work...the same concept as blend manifolds operating on the intake of a pump to blend chemicals is crazy to the rest of the world but weve seen success there too...have a great day guys and stay warm!
I would like to have one made. Who do I get in contact with?
@@josemarrero4554 call me 864 485 9309
Overcomplicating the softwash system intrgrating it with the pressure washer.
Gas roof pump killer for sure. Mike Fox approved 🇱🇷💪💪💪🇱🇷
This pump comes with built in pressure switch or is this your external pressure switch ?
No the pump has no built in switch it must be controlled externally
AR45 (11 gpm) your electric, 6gpm. WHO'S the killer
Gotta combine the pressure washer in with the 12 volt...the ar45 doesnt hold up to SH ive gotten a ton of calls from people who only ran them a few months and the bleach tore them up...ive always been a 12v guy...just trying to deliver a solid long lasting product...how long have you been running your GRP?
@@freedompowerwashingllc6199 honestly most guys don’t know how to run the gas roof pumps Iv been running them for years with very very few problems.
Wow
Can not hear you !
Hey jim youre right..ill try to find a microphone system that works on the next video...im not a big youtuber or anything and not trying to be just trying to have a way to show people what im working on and offering...thanks for the heads up.
Cause 90% of us here pressure wash concrete.
Thats what i am taking about , i needed one of those like yesterday send me ur info /number so we can talk very interest in this equipment