It's hard to make a tutorial on how to create complex origamis, But to put it shortly, you need to think how to make the head first, then you have to adjust the head to the neck, then imagine how to make the body according to the neck, and the tail is the last part because it's easy to improvise.
на самом деле эта модель была моей 4-й по счету, которую я делал по Видеорокам, когда узнал об оригами. И я ее делал 14 часов из листа вырванного из тетради, размером 21х21, опять таки по неопытности))) И ... он у меня, все же, получился, но, правда маленький и не такой замечательный))) СПАСИБО Вам!
Actually I don't think what technique I'm using. I just try to find out what's the best way to make each part. If we were to analyze the CP, It's basically box pleated body, several circle packings to make the head (one on each horn, two to make the the mouth and one for the space to make the eyes). There's no explanation for the wings... And the tail is just the result of the body pox pleating.
I had a problem when uploading this video in 1080p =/.... So I re-uploaded it in lower quality because the 1080p video would take 30 hours to complete the upload.
Bom, no começo eu fazia vídeos em português, mas a maioria das pessoas que assistiam eram americanos, por mais incrível que pareça. Ficou óbvio pra mim que eu deveria fazer vídeos em inglês. A história poderia ter sido outra se desde o começo o público brasileiro fosse maior que o americano, mas eu também me surpreendi ao ver tantos americanos vendo vídeos em portugues. O que você faria no meu lugar?
him saying : Bom, no começo eu fazia vídeos em português, mas a maioria das pessoas que assistiam eram americanos, por mais incrível que pareça. Ficou óbvio pra mim que eu deveria fazer vídeos em inglês. A história poderia ter sido outra se desde o começo o público brasileiro fosse maior que o americano, mas eu também me surpreendi ao ver tantos americanos vendo vídeos em portugues. O que você faria no meu lugar? and what I hear : azk,ewrufhizlsegdflhiehdhdkshjdfujsbfcjdfbdsujfhnfjfjfj kaka waka baka poooko baaaaaawaaaapuuuuuuuusterereruuwtrru toooopoooooppppppaaaaaazzzzzeeeeeeetoooooooomamamamamamanananananamana yopo bopo kooko lol i hear that
Just finished my first model!!! Def. time consuming and tested my patience a few times, but well worth the effort. Todashi you rock! Thanks so much for posting the tutorial!!!
Thank you very much for this very easy to follow tutorial how to fold your fantastic dragon. I enjoyed folding along and the resulting dragon is just cute! The reason I folded this version and not the 2.0 is that I like the look of it better, but I might give the other version a try as well. Thanks again for a great model and for making it available to us.
basically what you have to do is squash the two lines nearest the middle, which leaves a flap going upwards. Using the little angle-bisecter fold made just before this step, you fold it like a tsuru (crane) base, and fold the tip down, leaving the flap hanging upwards. This will allow you to flatten the model by folding this flap to either side.
Que bom que a maioria já entende o motivo dos vídeos serem em inglês! É impossível agradar a todos, então é necessário optar pela maioria mesmo. Lógico que ter legendas em português em todos os vídeos é um desejo do Tadashi também, tanto que ele está à procura de voluntários para ajudá-lo nisso. Só que não é nada simples e muito menos rápido fazer as legendas, demanda muito tempo. Se para terminar este vídeo o Tadashi ficou uma noite sem dormir, imagine fazendo as legendas ainda...
I know it's crazy, but I imagine a sheet of paper and try to distribute each part of the origami in the plain paper (Without folding it). After I make the distribution I mentally try lots of different folds using the distribution I thought. At this part you finish imagining the base for the crease pattern. After that I start folding a real paper, and add the details to the origami.
Great model! Finished it in 1:30 mins to 2h The horns look amazing! You should make a book with all your models in it, I would be the one to stay up for 48hrs waiting for it to be able to be purchased!
Pq ingles é a lingua universal, então ele falando em ingles dá a chance de muito mais pessoas, além de só brasileiros, poderem acompanhar o trabalho dele. Aliás Tadashimori, seu ingles é muito bom ^^
Really? Should the neck be smaller for the next versions? I was thinking only in adding details, but I thought the proportion was good. Anyway, I need more opinions.
came back after tadashi decided to revive this channel, looking back at these designs it amazes me how 7 yr old me was able to fold origamis like this. Fucking hell
Raunakchhatwal chhatwal okay so have you tried making the 2.0 if you have which one is easier and does it looks good if we make with a printer paper please reply
The paper distribution is similar, thats why it looks like the ancient dragon. But if you see the CP and the process to make the dragon its completely different. It's not the ancient dragon base. Look the crease pattern and you can confirm it.
This is a really complex tutorial my guy. I’ve been doing advanced origami for three years and this one still took me about four tries. Just keep going.
Thanks a lot for this video tadashimori! I like this modle better then the ancient dragon because it does take 6 hours to fold and I think it looks just as good! !!! Keep up the good work
Impressive, thanks alot for sharing! I used to fold some traditional origamis as a kid, but lost interest somewhere during school years. This makes me want to pick it up it again :) Ill try to fold along with your video. Will normal origami paper suffice, or should I get thinner paper?
This dragon is good. A little too good. When I first saw it (the day you uploaded of course), i thought that there was something breath taking. Now I know what it is: You should try to make the cp more advanced and later on try to see if you can improvise version 3.5 in the origami world championships.
I’ve tried regular paper you get for school but that seems not to do so well with things like this that have thicker parts, what paper would you recommend for this?
IIII DIIID IT!!!! finished just now, took me 2 hours using fifty cm japanese foil. I changed a little bit like the head going up instead of straight and it goes up then back to straight making a straight neck and its so cool i changed the claws also
actually, it does. following instructions is the latter part of origami. the creations are the major part. if no one created them, there would be no intructions to fold.
I just finished mine :) Good instructions, very nice dragon! The only thing I don't like are the legs and how you just mush them in to a form. I used reverse folds on them instead, once in front, twice in hind legs. The problem I now have the legs are very wide. Anyway, great work, I'd like to see the next version too!
I currently in the process of making it... almost half way there. without a doubt this is the hardes origami I have ever tried to fold. It goes like... One small step for Tadashi - one big step for me. Seriously his 20 is my 3 hours :|
We don't need your crap about what he named it. It is his design and we can assume that he does/did not intend for it to sound racist at all. He probably named it like that to make it sound awesome like it is. If you are going to make rude comments like this, then don't watch. We don't need bullcrap from people like you who give bullcrap comments.
I try to make it with 35x35 cm paper. It was harder to make the details because it was a little to small, but I succeeded. The only thing that he needs to improve in his version 1.1 is to be more specific and detailed on the dragons head.
My dear Tadashi Mori, I couldn't understand one thing. You made DD ver no.1 very nicely, teaching and showing step by step and DD ver no.2 very fast without step by step. Why?
I notice a resemblance between the steps for this and the steps for satoshi kotamaya's ancient dragon. Did you base this off that dragon? I could never do that; i'm not good enough at origami lol. On the other hand, great job, this looks incredible.
Learn this as a video tutorial maker, no matter how boring TO YOU the part might seem, you can't skip it. Ever. This part especially 5:02 -> 5:38. Yes it might seem simple, but some people like me actually need to see how you continue to fold it from that point on where you skip. Cause I folded it the wrong way around and the whole thing got screwed so I had to start all over again.
na verdade pouco importa a lingua que ele usa/fala pra explicar o origami, pq origami ja eh algo praticamente "universal". (notem as aspas haters) o que importa msm eh ele mostrar claramente como se faz as dobras, ta ai os videos do jonakashima que nao me deixam mentir a proposito, ficou bem legal esse dragao @tadashimori , axo que vou fazer esse antes de continuar tentando o ancient dragon =x
This is one of the harder models out there, but it was a fun build too! I had to use super thin paper though >.> Are there any other complex tutorials that are of this caliber?
I'm not really sure that I'll be able to make this awesome dragon.. I've already made the Fiery Dragon and The Snake Dragon but this one seems to be much more difficult than the others.. But I'll give it a try! :) Tadashi Mori, you really make great videos AND models!!
quite difficult, but after some hours of work my dragon is done :) maybe u should have explained the feet a bit more detailed and also told us which paper size would be best :3
I'm sorry, but you don't know what you're saying. The base is totally different and he is not angry with Kamiya. It would be very childish, and Tadashi is not a child. Tadashi spent so much time thinking about this origami because it requires much skill and knowledge to create an origami. If he had copied the Ancient, he would have done long ago time, because he always wanted to create a dragon.
open sink or closed because its hard to see? and do i end up with the same layers or do i make new ones? and can i just fold it side ways or is it necessary to do this fold?
Does it matter what kind of paper you use to make this particular model? You say thin paper works good, but what does that include? I have regular origami paper that comes with an origami book, is that too thick?
Man, i dont know how i did this when i was 11 and memorized every fold, now i just know how to make a crane. I miss the old days
same...
🥲
Same.....
Same...
Same.......
It's hard to make a tutorial on how to create complex origamis, But to put it shortly, you need to think how to make the head first, then you have to adjust the head to the neck, then imagine how to make the body according to the neck, and the tail is the last part because it's easy to improvise.
What is the hard eating from 1 to 10
на самом деле эта модель была моей 4-й по счету, которую я делал по Видеорокам, когда узнал об оригами. И я ее делал 14 часов из листа вырванного из тетради, размером 21х21, опять таки по неопытности))) И ... он у меня, все же, получился, но, правда маленький и не такой замечательный)))
СПАСИБО Вам!
круто! ая ток щяс собрираюсь делать!
Actually I don't think what technique I'm using. I just try to find out what's the best way to make each part.
If we were to analyze the CP, It's basically box pleated body, several circle packings to make the head (one on each horn, two to make the the mouth and one for the space to make the eyes).
There's no explanation for the wings... And the tail is just the result of the body pox pleating.
I had a problem when uploading this video in 1080p =/.... So I re-uploaded it in lower quality because the 1080p video would take 30 hours to complete the upload.
So mutch time!!!😨
Bom, no começo eu fazia vídeos em português, mas a maioria das pessoas que assistiam eram americanos, por mais incrível que pareça.
Ficou óbvio pra mim que eu deveria fazer vídeos em inglês.
A história poderia ter sido outra se desde o começo o público brasileiro fosse maior que o americano, mas eu também me surpreendi ao ver tantos americanos vendo vídeos em portugues.
O que você faria no meu lugar?
não sei português, mas estou tentando escrever, também faria algo assim e tadashi estaria de volta. Seu último vídeo foi há 3 anos, por favor, volte.
him saying : Bom, no começo eu fazia vídeos em português, mas a maioria das pessoas que assistiam eram americanos, por mais incrível que pareça.
Ficou óbvio pra mim que eu deveria fazer vídeos em inglês.
A história poderia ter sido outra se desde o começo o público brasileiro fosse maior que o americano, mas eu também me surpreendi ao ver tantos americanos vendo vídeos em portugues.
O que você faria no meu lugar?
and what I hear : azk,ewrufhizlsegdflhiehdhdkshjdfujsbfcjdfbdsujfhnfjfjfj kaka waka baka poooko baaaaaawaaaapuuuuuuuusterereruuwtrru toooopoooooppppppaaaaaazzzzzeeeeeeetoooooooomamamamamamanananananamana yopo bopo kooko lol i hear that
Just finished my first model!!! Def. time consuming and tested my patience a few times, but well worth the effort. Todashi you rock! Thanks so much for posting the tutorial!!!
dont talk to my favorite youtuber like that!!!
Thank you very much for this very easy to follow tutorial how to fold your fantastic dragon. I enjoyed folding along and the resulting dragon is just cute! The reason I folded this version and not the 2.0 is that I like the look of it better, but I might give the other version a try as well. Thanks again for a great model and for making it available to us.
Parabéns Tadashi !!! Se superando cada vez mais !!! Sucesso brother!!
basically what you have to do is squash the two lines nearest the middle, which leaves a flap going upwards. Using the little angle-bisecter fold made just before this step, you fold it like a tsuru (crane) base, and fold the tip down, leaving the flap hanging upwards. This will allow you to flatten the model by folding this flap to either side.
is it weird that i watch these videos on nights when i cant fall alseep?
I cannot understand how this origami made you fall asleep lol
Que bom que a maioria já entende o motivo dos vídeos serem em inglês! É impossível agradar a todos, então é necessário optar pela maioria mesmo. Lógico que ter legendas em português em todos os vídeos é um desejo do Tadashi também, tanto que ele está à procura de voluntários para ajudá-lo nisso. Só que não é nada simples e muito menos rápido fazer as legendas, demanda muito tempo. Se para terminar este vídeo o Tadashi ficou uma noite sem dormir, imagine fazendo as legendas ainda...
15:16 Him: "You going to"
CC: *cHoKE*
?
I know it's crazy, but I imagine a sheet of paper and try to distribute each part of the origami in the plain paper (Without folding it). After I make the distribution I mentally try lots of different folds using the distribution I thought. At this part you finish imagining the base for the crease pattern.
After that I start folding a real paper, and add the details to the origami.
video super. thank you that showed as to do this beautiful dragon of darkness:)
Great model! Finished it in 1:30 mins to 2h
The horns look amazing!
You should make a book with all your models in it,
I would be the one to stay up for 48hrs waiting for it to be able to be purchased!
oh and youre tutorials are all so awesome!!!!
hi
Pq ingles é a lingua universal, então ele falando em ingles dá a chance de muito mais pessoas, além de só brasileiros, poderem acompanhar o trabalho dele.
Aliás Tadashimori, seu ingles é muito bom ^^
I made an origami snowball 2.0
Cool!
으슷
8년이 지난 현재도 엄청 잘만드셨네
Really? Should the neck be smaller for the next versions? I was thinking only in adding details, but I thought the proportion was good. Anyway, I need more opinions.
i miss you so much
I like origami but this origami very hard I don't follow this origami you can slow I am very thanks. Thankyou. Nice meet you!!
Awwwww
THANK YOU TADASHI! Awesome video and model!! I had a ton of fun making this dragon! Your work is amazing!
Wow I did something faster than him!!!!!!!
gave up...😢
Origami dragon
came back after tadashi decided to revive this channel, looking back at these designs it amazes me how 7 yr old me was able to fold origamis like this. Fucking hell
I don't understand the step you are doing at 16:39
Donny Tra Think about pull out the inner layer and reverse every crease line.
You must extrude the part
@@미켈란젤로광장피렌체 와 영어 잘하신다
I don't know with you guys but 5:02 -> 5:38 is my favorite part because you know you worked hard on it.
I made it with regular printer paper, just didn't make the legs right
Raunakchhatwal chhatwal good job bro I can't even do it👍🏻
Raunakchhatwal chhatwal good job bro I can't even do it👍🏻
Raunakchhatwal chhatwal good job bro I can't even do it👍🏻
Raunakchhatwal chhatwal okay so have you tried making the 2.0 if you have which one is easier and does it looks good if we make with a printer paper please reply
1.0 is easier. In 2.0 there is a step where you have to divide the paper into thirds which is really annoying to do.
I think this is the best origami ever you created.
Can you fold this model?
0:55 I thought you were going to start reading the bible! XD
I agree, since it says "in the beginning" like in the bible XD
The paper distribution is similar, thats why it looks like the ancient dragon. But if you see the CP and the process to make the dragon its completely different.
It's not the ancient dragon base. Look the crease pattern and you can confirm it.
ur amazing i tried makin it like 5 times and i falied
This is a really complex tutorial my guy. I’ve been doing advanced origami for three years and this one still took me about four tries. Just keep going.
Easy
To easy
Thanks a lot for this video tadashimori! I like this modle better then the ancient dragon because it does take 6 hours to fold and I think it looks just as good! !!! Keep up the good work
using copy paper= more than an hour of hell
Minh Le use foil paper- it's cheap, thin and creases easily.
it's also homemade.
Minh Le i did fine with copy paper :3
+Necrosius717 yep me too
Minh Le I now
aitoh paper? xD
Impressive, thanks alot for sharing! I used to fold some traditional origamis as a kid, but lost interest somewhere during school years. This makes me want to pick it up it again :) Ill try to fold along with your video. Will normal origami paper suffice, or should I get thinner paper?
Could you make an easier version of this model please
Yeah
Yup I agree
Beautiful dragon. Clear instructions. I may fold one this weekend.
Here we go: Attempt number 521- lol. Jk- This is going to be my 12th though, so... Lol.
your origami rose is SOOOOO nicely done ! No joke, really ! I CAN'T WAIT FOR IT !
5 hours later... Ragequit
It's called a sink-fold. Try getting in the top (like he is) with a pen and spreading it open slowly so that you don't rip it . Hope i helped!
made it with 7 inch x 7 inch paper
Great video !!! And awesome dragon design ! I folded your dragon and had it came out great thanks for sharpening it with us
using cardstock; more than 5 hours of pure fury. lol
sao toan la tieng anh the nay
cardstock? try post-it
Brilliant model !!! Congrats! You've really upped you origami designing skills with this one.
Dang it, just messed up my 17th try:(
Lol
Waht😧
i am happy to tell you that i finaly Finnished it and am giving it to my mom as a delayed birthday gift
I'm loving it, but I need to get bigger paper! :)
What kind of paper did u use? Is it just origami paper?
Rrrrrrrrrrrrrrrrrrriiiiiiiiiip my papers is gooooooone😥😥😁😁
This dragon is good. A little too good. When I first saw it (the day you uploaded of course), i thought that there was something breath taking. Now I know what it is: You should try to make the cp more advanced and later on try to see if you can improvise version 3.5 in the origami world championships.
the head is hard
Still one of the most iconic piece in my opinion
verry easy do some super complex
This wasn't easy!!!
try the western dragon
I’ve tried regular paper you get for school but that seems not to do so well with things like this that have thicker parts, what paper would you recommend for this?
IIII DIIID IT!!!! finished just now, took me 2 hours using fifty cm japanese foil. I changed a little bit like the head going up instead of straight and it goes up then back to straight making a straight neck and its so cool i changed the claws also
I did put the link comparing both cps. Just take a look. I don't want to waste my 1 month effort like this =(
Epic dragon. Really nice job! This should be published on a book.
i attempt this for the fifth time and it turned out to be pretty good thanks Tadashi mori
Grat new dragon piece love it keep it up. Creatures from Final Fantasy/Dragons are great to see.
My first origami...
Its been 4 years..
Thank you for making it
It made me addicted to origami :)
same ...
actually, it does. following instructions is the latter part of origami. the creations are the major part. if no one created them, there would be no intructions to fold.
dude u are so pro in origami!!! i am u best FAN!!!
I just finished mine :) Good instructions, very nice dragon! The only thing I don't like are the legs and how you just mush them in to a form. I used reverse folds on them instead, once in front, twice in hind legs. The problem I now have the legs are very wide. Anyway, great work, I'd like to see the next version too!
"i recommend using thick paper"
me: does crayola constructions paper work?
thank you tadasi mori i waited so long
dako
Man it's awesome the way you explain !
more simple than A.D. I gotta perform this model. THanks Tadashi-san
I currently in the process of making it... almost half way there. without a doubt this is the hardes origami I have ever tried to fold. It goes like... One small step for Tadashi - one big step for me. Seriously his 20 is my 3 hours :|
We don't need your crap about what he named it. It is his design and we can assume that he does/did not intend for it to sound racist at all. He probably named it like that to make it sound awesome like it is. If you are going to make rude comments like this, then don't watch. We don't need bullcrap from people like you who give bullcrap comments.
I try to make it with 35x35 cm paper. It was harder to make the details because it was a little to small, but I succeeded. The only thing that he needs to improve in his version 1.1 is to be more specific and detailed on the dragons head.
My dear Tadashi Mori, I couldn't understand one thing. You made DD ver no.1 very nicely, teaching and showing step by step and DD ver no.2 very fast without step by step. Why?
I notice a resemblance between the steps for this and the steps for satoshi kotamaya's ancient dragon. Did you base this off that dragon? I could never do that; i'm not good enough at origami lol. On the other hand, great job, this looks incredible.
I Made your dragon 4 times, it turned out really good :)
Learn this as a video tutorial maker, no matter how boring TO YOU the part might seem, you can't skip it. Ever. This part especially 5:02 -> 5:38. Yes it might seem simple, but some people like me actually need to see how you continue to fold it from that point on where you skip. Cause I folded it the wrong way around and the whole thing got screwed so I had to start all over again.
na verdade pouco importa a lingua que ele usa/fala pra explicar o origami, pq origami ja eh algo praticamente "universal". (notem as aspas haters)
o que importa msm eh ele mostrar claramente como se faz as dobras,
ta ai os videos do jonakashima que nao me deixam mentir
a proposito, ficou bem legal esse dragao @tadashimori , axo que vou fazer esse antes de continuar tentando o ancient dragon =x
Wow! Thats hard like the ancient dragon. For me u are better than kade chan. Super mega ultra cool origami!
What kind of paper did you use? I am sorry, I can't hear what you said. I've had a lot of trouble finding thin, large paper.
Thanks!
This is one of the harder models out there, but it was a fun build too! I had to use super thin paper though >.>
Are there any other complex tutorials that are of this caliber?
I'm so thankful for you putting this up:) I actually managed to do it! Thank you!
HELP! My origame doesn't have those two: 28:11 it's just, seems like two but they are glued, should cut?
Which Is Easier , Simple Dragon By Shuki Kato Or This Darkness Dragon
I'm not really sure that I'll be able to make this awesome dragon.. I've already made the Fiery Dragon and The Snake Dragon but this one seems to be much more difficult than the others.. But I'll give it a try! :) Tadashi Mori, you really make great videos AND models!!
I think I'm gonna try this one before Ancient dragon... TIME TO BUY MORE PAPER!!!
How do you create it?? The project in general. How do you understand the way from the plane piece of paper to the dragon?
ooh! cool! This video is just what i needed! Thanks, stay awesome and HAVE A GREAT DAY!
Tadashi Mori, i was wondering what origami design techiques you used in this dragon. Diagonal box pleating? Circle Packing? Both?
eeeeeey, i've finaly done it!!!! it is so cool, thanks for the tutorial :)
quite difficult, but after some hours of work my dragon is done :)
maybe u should have explained the feet a bit more detailed and also told us which paper size would be best :3
I'm sorry, but you don't know what you're saying. The base is totally different and he is not angry with Kamiya. It would be very childish, and Tadashi is not a child. Tadashi spent so much time thinking about this origami because it requires much skill and knowledge to create an origami. If he had copied the Ancient, he would have done long ago time, because he always wanted to create a dragon.
maaan, that's impressive.
aaand, can you tell me where did you find music from the end of the movie? :)
sorry but, what size is the red paper that you used in the beginning of the tutorial? thanks =D very nice job certanly =D
I don't know, I guess you must know how to prepare / choose you paper really well in order to make this origami looks good.
Instructions unclear.Turned my dog into a microwave.
Very awesome. Looks pretty intimidating, but it's not so hard, just very tedious. Takes a lot of time. I recommend others to give it a shot.
i never thought to use news paper thats a good idea!
Were those zigzags made b4 the fold or do you hav to make it at that point ?
open sink or closed because its hard to see?
and do i end up with the same layers or do i make new ones?
and can i just fold it side ways or is it necessary to do this fold?
It's a Thai unryu paper. I just painted with acrylic paint +cmc glue =)
Does it matter what kind of paper you use to make this particular model? You say thin paper works good, but what does that include? I have regular origami paper that comes with an origami book, is that too thick?