In this video I used talcum powder to prevent pages from sticking together. Since talc or talcum powder has some safety concerns. I decided to try out safer alternatives. I tried baking soda and cornstarch. Both work fine as an alternative for talcum powder. The baking soda is a little grittier. Since cornstarch is a thickening agent you must be careful not to use too much of it. Because you risk your layer of cornstarch turning into a paste, which is not fun to clean up. You need to use the tiniest amount of cornstarch for it to work, without becoming a gooey mess. I will probably use baking soda in the future. I found it to be an acceptable alternative, although it's not as effective as talcum powder.
@@aaa_1727according to the Wikipedia page on talcum powder: "Talcum powder, if inhaled, may cause aspiration pneumonia and granuloma.[2] Severe cases may lead to chronic respiratory problems and death.[3][4] The particles in corn starch powder are larger and less likely to be inhaled.[5]" and then there's more after that. You can also do more in depth research of your own if it interests you. For this small an amount though it should be fine. Maybe wear a mask as an extra precaution if you're really worried, but as its being mixed with some water it should prevent most of the problem of airborne particles being inhaled and should be ok.
Echoing others I can’t believe this video isn’t more well-liked! Your method of watered down glue BEFORE thermal foil and LOWER heat is the only tip I’ve found that works. THANK YOU!!
just one question, its pvc glue? where do you buy it? do you think it would work the special glue they sell at craft stores which is basically for foil without toner?
What a fantastic tutorial! I looked for ages and ages for some good instruction on simple gilding for already-bound hardcover books and didn't find anything that seemed doable until I found this. Thank you so much!! 💜💜💜
Although i used the talc powder i may have been over generous with the glue because it wasnt laying down. I think next time i will do one side- split the pages, do another- split the pages- and hopefully itll take less time keeping the pages open.
It’s talcum powder. The mentho powder was just a brand I had at home at the moment. I am currently trying out some safer alternatives to talcum powder. Since talcum powder has some safety concerns. If I find any alternatives I'll let you know. UPDATE: I tried baking soda and cornstarch. Both worked fine. With baking soda the powder was a little bit grittier, so I had a harder time getting the powder in between the pages. And if you use too much cornstarch it will turn into a paste when it comes in contact with fluids. So if you choose to use cornstarch use the tiniest amount. Even less than what I used of talcum powder. I will personally switch to baking soda while I look for other alternatives to talcum powder.
I never tried that before. It might be a bit too finicky to try to use stencils with foil. But you could maybe use foil for the background and use stencils to paint in a moon and star pattern on top of the foil. Might try it myself one day.
Hi thank you for making this video! I have a book which originally had gilded edges but there were scratches and an Etsy seller attempted to fix it with sprayed paint (which turned out to make the book worse than before). I am trying to re gild the edges myself and am wondering whether I can use any gold heated foil to fix the edges
You can use hot foil to fix the edges. But before you do any of that you first need to remove all the paint and previous gilding. It’s a pain to do, but well worth it in the end.
I actually haven’t tried that yet. I think it won’t work. Since the foil I used had a thin layer of heat activated glue on the other end. And the gift wrap plastic doesn’t have that. But I am intrigued, so I will try it out and let you know shortly.
So… I tried it out. It definitely didn’t work for me. I tried to iron the grift wrapping foil on to the edge with both sides. But nothing happened. It just doesn’t transfer. I think it really has something to do with the way the decor foil is made. And apparently the gift wrapping foil is not made the same way. Even though they kinda do look a like. Hope this helped.
Oh my goodness, you are amazing! You helped me solve a dilemma of having to tear the pages off my very nice Black Notebook, tho I was thinking, do you think it would be okay to pull the hard covers back, like not force them all the way back, but like as far back as possible so they aren't too close to the pages? Thank you so much for your upload though, you proved to me it can be done
I do think it is possible (I have done it before myself). As long as the pages are pressed together tightly (so no glue can seep through) you should be fine by pulling the hard covers back a little.
@@AnnaMarieReads Thank you so much for the answer! Honestly I'm probably just gonna do it the way you showed cause yours come out so nice, I just saw another one of your videos as I'm sure you'll notice I just commented before this one haha but luckily you also mentioned how to deal with rounded edges since my notebook comes with those rounded edges, the only thing I'm really curious sbout is how you get the bottom and top sides of the notebook with the hard cover on since I imagine the slabs won't fit perfectly in between pages and hard cover where they meet at the end. Anyway thanks for all your help you're amazing
@@HeroofSomething It's honestly the hardest part of gilding a hardcover, without removing the cover first. I use a tiny iron, that just barely fits into that space. So I am still able to gild that part of a hardcover.
A cut the piece of sandpaper to size. So it fits in between the book boards and just sand it in one direction (away from the spine). And I did try books with curved edges. It’s a little bit more finicky. But with a small enough iron it definitely is possible
My concern is repairing an already gilded book edges. It's all gold and I noticed the book may already have a scratch pre-buying as I didn't check, or I may have accidentally scratched it after buying it and heading home.
For that you would need to remove the previous gilding. By sanding it down enough. At that point it will be just like gilding any other book. But if you mess up with gilding I am guessing it’s going to look worse than a scratch. If you have never done this before it’s definitely a risk you are taking.
It is possible to gild longer book edges. I usually don't overlap. I just iron on the first sheet of foil and place the other sheet right on the edge of the first. So that they actually don't overlap. If you place it correctly (so there is no gap or overlap) there only will be a tiny stripe in your gilded edge, which won't be too noticible. I did try overlapping the foil once, but the end result is just less clean. Also if you foil has a pattern on in, you should try to line the pattern as close as possible so the tiny stripe won't be as visible. Hope this helped.
It’s to initially attach the foil without airpockets to the edge. I have done it before without and waiting for the foils glue to heat up enough to stick took to long and while moving the iron around it tended to move the foil as well because the glue on the foil isn’t tacky from the get go. By using diluted glue it helps to work the foil without it moving all over the place
You should use watercolours as they don't make the pages stick together. I have painted some pictures this way. The trick is that you need to use pretty dry brushes and layer multiple thin layers of pigment to achieve desired coverage, otherwise the paint ruin your book.
Have you ever done a bible with rounded corners? I am worried I won't get the corners well enough or that the pages will be too thin. And I am curious if you have ever painted the pages then added gilding?
So I have never done a bible with rounded corners before. I will have to try it out and get back to you on that. I did try gilding over painted pages. It turned out really messy for me. I made a bunch of mistakes along the way ( putting the foil on not fully dried paint, using too much glue, Etc.) I know it is possible. I just did it wrong. So I will have to give it another try before I can truly say it’s possible with the method I am currently using. I am planning on doing some gilding in the next couple of weeks and will let you know if the method I am using can be applied to rounded and painted book edges.
So I have been experimenting. And I will post a video towards the end of next week. But I might as well tell you my results right now. First off I could not find a bible with rounded corners. All my bibles have straight corners. I did find a note book with a rounded corner and tried to gilt that. It did not pose too many issues. By layering the foil there was no line or anything like that visible on the rounded edge. So it definitely is possible to do a rounded corner. I also tried to gilt a bible with thin pages. I must say that I did not find it to be an issue. As long as the book was pressed down hard enough while gilding the thickness of the pages didn’t really matter. What I did notice though is that separating the pages from one and other after gilding posed some challenges. The pages are so thin that it’s hard to see where to pry them open after gilding. Also going through the entire bible separating all the pages takes a very long time. And the last test I did is gilding painted edges. So as long as the paint is not water based (otherwise the glue might activate the paint again and the gilding won’t stick) and it is truly dry. There is no difference between gilding regular edges and painted ones. Hope this update helps.
No unfortunately not. A hairdryer doesn’t give of enough heat and it’s also a combination of heat and pressure that makes the gilding stick to the book
I have tried this so many times, even bought a sander to sand the pages and make sure they are completely smooth, but I still cannot get it to look like yours does. Mine comes out matte, not shiny at all, or it has little tiny streaks in it. im at my wits end and I really want to figure this out
You would need to progress from low grit to high grit sandpaper. Finish with as high as 3000 grit. Walmart online sells sample packs with all the grits. The edge will be smooth and shiny before you even start foiling. Good luck!
I am pretty certain that won’t work. You need a transfer foil of some kind. I personally recommend iCraft deco foil. I believe Micheal’s has it in stock in their webshop. And Amazon sells it too.
Yeah, I actually did experience this. Flaking was usually caused by one of the following: - Too much pva glue - Glue was still wet when foil was applied. You need to wait until the glue is sticky, but doesn’t leave a residue on your finger. - The book edge was not clean enough. After sanding the edge you shouldn’t touch it with your fingers. Just with a dry clean brush to brush of the dust from the sanding. And the book pages sticking together was usually caused by the following: - Too much glue. (Only a thin layer should be applied). - The book wasn’t pressed down tight enough when the glue was applied and the glue managed to seep in between the pages. - Also applying multiple layers of foil will cause the foil to flake. At most I managed to layer two foils. After applying the third it started flaking. When the flaking of the foil or stuck pages happens to me I usually just sand off the foil I applied. This should also help with unsticking the pages as your are basically sanding away the glue. Before you start sanding make absolutely sure that the glue has dried. Otherwise you might cause the pages to tear. Also when sanding keep the pages pressed together tightly as not to tear the paper. After sand I reapply the foil and just try again. Also the pages should stick a tiny bit after applying the foil. But after fanning the pages the pages stop sticking together. Hope this helped.
Hi! I loved your video! Did you ever experienced using a heat gun/hot air gun instead of a ironing the edges? I do not have a mini-iron and I will totally make a try, but maybe you can spare me a potential disaster :D
I actually did try a heat gun. But it didn’t work for me. The foil needs to be put down with a certain amount of pressure. The heat gun just burned the foil and it curled up. But it just didn’t stick on the edge. Hope this helps.
Yes, it’s pva glue mixed with 50% water, to make it less tacky. You could also use bookbinders glue, but I found it to be pretty much the same as pva. I would recommend testing the pva and water mixture. Depending on the brand you might need to use less or more water. The glue should have a milky almost watery consistency. As you can see in my video the glue barely holds the foil onto the edge. I had to Sometimes reapply another layer of the glue mixture just to keep it in place while I iron the foil onto the book.
The temperature you are using on your iron is probably too high. Try lower temperatures first. It takes longer, but it should prevent wrinkling of the foil. Good luck!
What about doing this for a 1611 KJV Bible? It already has gold leaf but it's coming up a bit because of me using it, so what method do you recommend? This was awesome BTW!
So if it already has gilding on it you need to use similar gilding and adhesive to fix it. If you are not sure what that is, you will need to remove the original gilding completely, before redoing the gilding with gilding materials of your choice. The reason being that the new gilding might not stick to the old one.
@@AnnaMarieReads Thank you for answering my question, and I'm sorry for not seeing it sooner. I do have some gold leaf paper and glue for an art project that I'm doing, but I don't think I'm ready to touch my 1611 Bible yet; so I'll get it done professionally and practice on some novels.
In this video I used talcum powder to prevent pages from sticking together. Since talc or talcum powder has some safety concerns. I decided to try out safer alternatives. I tried baking soda and cornstarch. Both work fine as an alternative for talcum powder. The baking soda is a little grittier. Since cornstarch is a thickening agent you must be careful not to use too much of it. Because you risk your layer of cornstarch turning into a paste, which is not fun to clean up. You need to use the tiniest amount of cornstarch for it to work, without becoming a gooey mess.
I will probably use baking soda in the future. I found it to be an acceptable alternative, although it's not as effective as talcum powder.
Thank you anna
Can you elaborate on the "safety concerns" of the talcum powder?
@@aaa_1727according to the Wikipedia page on talcum powder: "Talcum powder, if inhaled, may cause aspiration pneumonia and granuloma.[2] Severe cases may lead to chronic respiratory problems and death.[3][4] The particles in corn starch powder are larger and less likely to be inhaled.[5]" and then there's more after that. You can also do more in depth research of your own if it interests you. For this small an amount though it should be fine. Maybe wear a mask as an extra precaution if you're really worried, but as its being mixed with some water it should prevent most of the problem of airborne particles being inhaled and should be ok.
what are the safety concerns with the talcum powder?
What is baking soda? Is it the same as bicarbonate of soda?
Echoing others I can’t believe this video isn’t more well-liked! Your method of watered down glue BEFORE thermal foil and LOWER heat is the only tip I’ve found that works. THANK YOU!!
Thank you so much for this! Easily the best and most in-depth foil gilding guide. You deserve like 1,000x the views.
Thank you! Happy to help.
I don't know why you don't have lots of effort, this is incredible i was looking for this technic with foil and finally i came through your video
just one question, its pvc glue? where do you buy it? do you think it would work the special glue they sell at craft stores which is basically for foil without toner?
This is a brilliant video with great explanations and troubleshooting tips. Thank you!
This is all new to me... I really love your explanations ...thank you so much!
Also adorable kitty! What a cute surprise at the end haha!
This video is exactly what I was looking for ♡ Thank you for making it; super helpful
Happy I could help.
THANK YOU X A MILLION! This is the best tutorial I have found on using foiling and your work is just beautiful!
Thank you. Glad you liked it.
What a fantastic tutorial! I looked for ages and ages for some good instruction on simple gilding for already-bound hardcover books and didn't find anything that seemed doable until I found this. Thank you so much!! 💜💜💜
Glad I could help.
Thank you so much!!! I've been looking for a video like this for months and you're the only person I've found lol
Happy to help!
This was really helpful, thank you.
Amazing! 😍 So excited to do this soon 💖 definitely will have to practice on some old books first 😆
Thank you from Saudi Arabia 🇸🇦
Thank u very much.fan of your art from india
Thank you, I am glad you enjoyed it.
I bet a quilter’s mini iron would be really helpful for this.
Oh, just saw you have one! 😂
This is incredibly helpful! Thank you!!
This is a gem tutorial. thank u
It's wrong though.
Great video! Very helpful, thanks 😃
Thank you!! Love ya!!
Happy to help!
Wow thank you so much
Question, would a hair dryer work on low everything instead of an iron for the small spaces?
Fab vidio. ❤😊
Can I ask if the foil is the same as HTV heat transfer vinyl? Or would that be too thick?
Transfer vinyl won’t work. It needs to be hot stamping foil. It’s incredibly thin and really something else than transfer vinyl.
That was super helpful Thank you ❤️
I've been looking for a solution to cover a hot chocolate stain on the bottom edge of an ungilded bible and this might do the trick. Thanks!
I'm watching for tge same reason, except it's for a used Bible I bought online w food stains.
Olá … qual é a cola q vc usa por favor me ajuda hahaha o talco é antes do processo para não grudar ? Mas quando poxa não sai o talco ?
Thanks
Although i used the talc powder i may have been over generous with the glue because it wasnt laying down. I think next time i will do one side- split the pages, do another- split the pages- and hopefully itll take less time keeping the pages open.
thank you
Amazing
What type of powder u used? So that i can purchase here in india becoz this brand of Mentho powder would not be available here
It’s talcum powder. The mentho powder was just a brand I had at home at the moment. I am currently trying out some safer alternatives to talcum powder. Since talcum powder has some safety concerns. If I find any alternatives I'll let you know.
UPDATE: I tried baking soda and cornstarch. Both worked fine. With baking soda the powder was a little bit grittier, so I had a harder time getting the powder in between the pages. And if you use too much cornstarch it will turn into a paste when it comes in contact with fluids. So if you choose to use cornstarch use the tiniest amount. Even less than what I used of talcum powder. I will personally switch to baking soda while I look for other alternatives to talcum powder.
Can you incorporate stencils? Like if I wanted to add a moon and star pattern to the holographic foil.
I never tried that before. It might be a bit too finicky to try to use stencils with foil. But you could maybe use foil for the background and use stencils to paint in a moon and star pattern on top of the foil. Might try it myself one day.
very nice
no
Доброго времени суток! В какой момент и какой клей вы наноситите на книгу? На видео не поняла
Hi thank you for making this video! I have a book which originally had gilded edges but there were scratches and an Etsy seller attempted to fix it with sprayed paint (which turned out to make the book worse than before). I am trying to re gild the edges myself and am wondering whether I can use any gold heated foil to fix the edges
You can use hot foil to fix the edges. But before you do any of that you first need to remove all the paint and previous gilding. It’s a pain to do, but well worth it in the end.
@@AnnaMarieReads do you think it’s possible to sand the spray paint away and leave the original gilded edges?
Unfortunately, I don’t think so.
You don't need to heat gold.
cool Idea...I will use this for tarot cards...
SOOOO PRETTY TY!
Wow, love this idea! could you let me know if instead of decor foil we can use gift wrap paper- those blingy plastic ones
I actually haven’t tried that yet. I think it won’t work. Since the foil I used had a thin layer of heat activated glue on the other end. And the gift wrap plastic doesn’t have that. But I am intrigued, so I will try it out and let you know shortly.
@@AnnaMarieReads oh okay, thanks!
So… I tried it out. It definitely didn’t work for me. I tried to iron the grift wrapping foil on to the edge with both sides. But nothing happened. It just doesn’t transfer. I think it really has something to do with the way the decor foil is made. And apparently the gift wrapping foil is not made the same way. Even though they kinda do look a like. Hope this helped.
@@AnnaMarieReads Omg thank you so much for trying it out and letting me know. I really appreciate it! 🌸
Oh my goodness, you are amazing! You helped me solve a dilemma of having to tear the pages off my very nice Black Notebook, tho I was thinking, do you think it would be okay to pull the hard covers back, like not force them all the way back, but like as far back as possible so they aren't too close to the pages? Thank you so much for your upload though, you proved to me it can be done
I do think it is possible (I have done it before myself). As long as the pages are pressed together tightly (so no glue can seep through) you should be fine by pulling the hard covers back a little.
@@AnnaMarieReads Thank you so much for the answer! Honestly I'm probably just gonna do it the way you showed cause yours come out so nice, I just saw another one of your videos as I'm sure you'll notice I just commented before this one haha but luckily you also mentioned how to deal with rounded edges since my notebook comes with those rounded edges, the only thing I'm really curious sbout is how you get the bottom and top sides of the notebook with the hard cover on since I imagine the slabs won't fit perfectly in between pages and hard cover where they meet at the end. Anyway thanks for all your help you're amazing
@@HeroofSomething It's honestly the hardest part of gilding a hardcover, without removing the cover first. I use a tiny iron, that just barely fits into that space. So I am still able to gild that part of a hardcover.
Can I use that same process if the book has already silver edges but I want to change it for gold or do I have to take it off first? Thanks.
I wouldn’t recommend that. It will have spots where it will shine through. It also won’t stick as well as it would on clean edges.
How do you sand the top edge? Also have you tried books with a curved edge?
A cut the piece of sandpaper to size. So it fits in between the book boards and just sand it in one direction (away from the spine). And I did try books with curved edges. It’s a little bit more finicky. But with a small enough iron it definitely is possible
Would a hairdryer work?
Unfortunately not. You need both the heat as the pressure from the iron to get the glue to melt and stick to the edge
@@AnnaMarieReads Thanks!
My concern is repairing an already gilded book edges. It's all gold and I noticed the book may already have a scratch pre-buying as I didn't check, or I may have accidentally scratched it after buying it and heading home.
For that you would need to remove the previous gilding. By sanding it down enough. At that point it will be just like gilding any other book. But if you mess up with gilding I am guessing it’s going to look worse than a scratch. If you have never done this before it’s definitely a risk you are taking.
Do you think if the pages are longer than the sheets of gild that you could over lap the gild and it would be okay?
It is possible to gild longer book edges. I usually don't overlap. I just iron on the first sheet of foil and place the other sheet right on the edge of the first. So that they actually don't overlap. If you place it correctly (so there is no gap or overlap) there only will be a tiny stripe in your gilded edge, which won't be too noticible. I did try overlapping the foil once, but the end result is just less clean. Also if you foil has a pattern on in, you should try to line the pattern as close as possible so the tiny stripe won't be as visible. Hope this helped.
@@AnnaMarieReads Thank you.
Why do you need glue if the foil suggest had hot activated glue?
It’s to initially attach the foil without airpockets to the edge. I have done it before without and waiting for the foils glue to heat up enough to stick took to long and while moving the iron around it tended to move the foil as well because the glue on the foil isn’t tacky from the get go. By using diluted glue it helps to work the foil without it moving all over the place
What should I use to paint book edges
You should use watercolours as they don't make the pages stick together. I have painted some pictures this way. The trick is that you need to use pretty dry brushes and layer multiple thin layers of pigment to achieve desired coverage, otherwise the paint ruin your book.
Okay thank you
Have you ever done a bible with rounded corners? I am worried I won't get the corners well enough or that the pages will be too thin. And I am curious if you have ever painted the pages then added gilding?
So I have never done a bible with rounded corners before. I will have to try it out and get back to you on that. I did try gilding over painted pages. It turned out really messy for me. I made a bunch of mistakes along the way ( putting the foil on not fully dried paint, using too much glue, Etc.) I know it is possible. I just did it wrong. So I will have to give it another try before I can truly say it’s possible with the method I am currently using. I am planning on doing some gilding in the next couple of weeks and will let you know if the method I am using can be applied to rounded and painted book edges.
@@AnnaMarieReads Thank you so much! I enjoyed this video, and look forward to hearing how it turns out. In the mean I may try my hand at hot foil.
So I have been experimenting. And I will post a video towards the end of next week. But I might as well tell you my results right now. First off I could not find a bible with rounded corners. All my bibles have straight corners. I did find a note book with a rounded corner and tried to gilt that. It did not pose too many issues. By layering the foil there was no line or anything like that visible on the rounded edge. So it definitely is possible to do a rounded corner. I also tried to gilt a bible with thin pages. I must say that I did not find it to be an issue. As long as the book was pressed down hard enough while gilding the thickness of the pages didn’t really matter. What I did notice though is that separating the pages from one and other after gilding posed some challenges. The pages are so thin that it’s hard to see where to pry them open after gilding. Also going through the entire bible separating all the pages takes a very long time. And the last test I did is gilding painted edges. So as long as the paint is not water based (otherwise the glue might activate the paint again and the gilding won’t stick) and it is truly dry. There is no difference between gilding regular edges and painted ones. Hope this update helps.
Can you use a hair dryer instead of an iron?
No unfortunately not. A hairdryer doesn’t give of enough heat and it’s also a combination of heat and pressure that makes the gilding stick to the book
I have tried this so many times, even bought a sander to sand the pages and make sure they are completely smooth, but I still cannot get it to look like yours does. Mine comes out matte, not shiny at all, or it has little tiny streaks in it. im at my wits end and I really want to figure this out
I’m still trying to get the right amount of cornstarch
What brand foil are you using? Also mine turned out matte when the temperature is too high.
I used vinyl frog and stardust works
You would need to progress from low grit to high grit sandpaper. Finish with as high as 3000 grit. Walmart online sells sample packs with all the grits. The edge will be smooth and shiny before you even start foiling. Good luck!
I used the same supplies, the foil scratches so easily. Do you have a fix for that?
Sorry, I never had an issue with it. Did you use the same brand foil as well?
I only found card stock foil at Michael’s, would that work?
I am pretty certain that won’t work. You need a transfer foil of some kind. I personally recommend iCraft deco foil. I believe Micheal’s has it in stock in their webshop. And Amazon sells it too.
I am not sure what I did wrong, but my pages stuck together and when I separated them the foil flaked. Have you experienced this?
Yeah, I actually did experience this. Flaking was usually caused by one of the following:
- Too much pva glue
- Glue was still wet when foil was applied. You need to wait until the glue is sticky, but doesn’t leave a residue on your finger.
- The book edge was not clean enough. After sanding the edge you shouldn’t touch it with your fingers. Just with a dry clean brush to brush of the dust from the sanding.
And the book pages sticking together was usually caused by the following:
- Too much glue. (Only a thin layer should be applied).
- The book wasn’t pressed down tight enough when the glue was applied and the glue managed to seep in between the pages.
- Also applying multiple layers of foil will cause the foil to flake. At most I managed to layer two foils. After applying the third it started flaking.
When the flaking of the foil or stuck pages happens to me I usually just sand off the foil I applied. This should also help with unsticking the pages as your are basically sanding away the glue. Before you start sanding make absolutely sure that the glue has dried. Otherwise you might cause the pages to tear. Also when sanding keep the pages pressed together tightly as not to tear the paper. After sand I reapply the foil and just try again.
Also the pages should stick a tiny bit after applying the foil. But after fanning the pages the pages stop sticking together.
Hope this helped.
Hi! I loved your video! Did you ever experienced using a heat gun/hot air gun instead of a ironing the edges? I do not have a mini-iron and I will totally make a try, but maybe you can spare me a potential disaster :D
I actually did try a heat gun. But it didn’t work for me. The foil needs to be put down with a certain amount of pressure. The heat gun just burned the foil and it curled up. But it just didn’t stick on the edge. Hope this helps.
@@AnnaMarieReads definitely. Thank you
Do you use a kind of glue? nice video : )
Yes, it’s pva glue mixed with 50% water, to make it less tacky. You could also use bookbinders glue, but I found it to be pretty much the same as pva. I would recommend testing the pva and water mixture. Depending on the brand you might need to use less or more water. The glue should have a milky almost watery consistency. As you can see in my video the glue barely holds the foil onto the edge. I had to Sometimes reapply another layer of the glue mixture just to keep it in place while I iron the foil onto the book.
Does this work w bibles?
You can use this technique on any book
Would this work on a Bible?
My foil keeps getting wrinkly when i press it 😭 i dont know what to do
The temperature you are using on your iron is probably too high. Try lower temperatures first. It takes longer, but it should prevent wrinkling of the foil. Good luck!
What about doing this for a 1611 KJV Bible? It already has gold leaf but it's coming up a bit because of me using it, so what method do you recommend? This was awesome BTW!
So if it already has gilding on it you need to use similar gilding and adhesive to fix it. If you are not sure what that is, you will need to remove the original gilding completely, before redoing the gilding with gilding materials of your choice. The reason being that the new gilding might not stick to the old one.
@@AnnaMarieReads Thank you for answering my question, and I'm sorry for not seeing it sooner. I do have some gold leaf paper and glue for an art project that I'm doing, but I don't think I'm ready to touch my 1611 Bible yet; so I'll get it done professionally and practice on some novels.
That's NOT gilding!
simple? lol. its complicated as hell
Hello! What's your email address? Would love to talk to you about a book project
Hi, sorry about the late reply. So could you maybe elaborate?