Thank you for the video. Replaced mine on a 2023 Armada that was making the loud semi noise. Takeaways from video- fan clutch drops out the bottom, remove rock shield from underneath, fan shroud bottom half removable out the bottom, remove oil filter, use auto pick to release red clip on electrical connection, need small hands to get nuts on studs for fan clutch(otherwise took me 90 minutes). If you can change your oil, you can do this.
Excellent video. I was about to give up on installing a clutch fan on a 2018 Nissan Titan. You nailed it. Didn't understand your language, but followed you step by step. 😅
Can you please guide me how did you hold the pully so it will not rotate in order to losen and also tighten the 4 nuts?! I failed to find somthing hold it 😥
I used a 10mm closed end wrench and then put a long iron pipe over it. Then once its in a spot with a little wiggle room give it a whack with your hand.... single impact will loosen it. The serpentine belt is still on btw.
Thank you for the video. Replaced mine on a 2023 Armada that was making the loud semi noise. Takeaways from video- fan clutch drops out the bottom, remove rock shield from underneath, fan shroud bottom half removable out the bottom, remove oil filter, use auto pick to release red clip on electrical connection, need small hands to get nuts on studs for fan clutch(otherwise took me 90 minutes). If you can change your oil, you can do this.
Excellent video. I was about to give up on installing a clutch fan on a 2018 Nissan Titan. You nailed it. Didn't understand your language, but followed you step by step. 😅
Thanks
Tq bro.. sangat membantu.. first time nak tukr clutch fan ni.. 👍😉
Thank you bro
Can you please guide me how did you hold the pully so it will not rotate in order to losen and also tighten the 4 nuts?!
I failed to find somthing hold it 😥
Need to catch with big screwdriver later 10mm nut remove
I used a 10mm closed end wrench and then put a long iron pipe over it. Then once its in a spot with a little wiggle room give it a whack with your hand.... single impact will loosen it. The serpentine belt is still on btw.
Sir how much was the cost including labour.... 🙏I like ur videos
+971 50 614 2129 plz call
Good job 👍👍👍👍👍👍
Is this a newer code number 210825x23a
Yes sir
@@Autoenginecheck Do you have a clip explanation?
Hi I changed mine, but still making big wind noise..where can I check to fix it ..pls
g.co/kgs/FQZkPF
👍🏼👍🏼👍🏼
Thanks
Oil filter না খুললে ও চলে ভাই আমি oil filter না খুলে কাজ করি
Goood