New Makita X-Lock Angle Grinder (PADDLE TRIGGER)
HTML-код
- Опубликовано: 13 сен 2024
- I thank you for checking out this video, Im just your average guy having Fun with tools. I test tools out to see what these tools can do, and what they can't do. Please Subscribe to the channel and get that tool fix here. Have a great day!
![EZ Wheel Changes - Makita XAG26 X Lock Grinder Review [BRUSHLESS]](http://i.ytimg.com/vi/WqiCzpFykV0/mqdefault.jpg)
![EZ Wheel Changes - Makita XAG26 X Lock Grinder Review [BRUSHLESS]](/img/tr.png)
I've never used a wrench to tighten or remove the nut off my grinder. Just grab the disc by hand and pull it down to loosen it then remove it by hand.
The disadvantage for me is that I can only use the 5 inch, not the 4.5 inch. The smaller one doesn't have enough reach. The 5 inch Xlock can only be bought online, that means I have to pay for shipping too.
Either Metabo, or Makita, when it comes to a grinder. Makita is so smooth. Metabo is known for being dependable, and enjoys a great reputation amongst the trades. I have three Makitas, otherwise Id be checking one of these out! On my soap box once again, It’s a crying shame Makita doesn’t offer anything above 6.0 Amp Hours, in their 18 Volt line. These new grinders could sure benefit from a bigger battery. Thumbs Up Dave! 👍👍👍😁✌🏻🇺🇸
I thank you George
The issue with makita grinders is they run at around 8000rpm so bigger batteries would only offer a longer run time.
If you want a higher powered cordless you should look at Bosch or DeWalt. The latest Bosch brushless can run up to 11000rpm using their ProCore batteries.
Makita cordless grinders are notoriously slow and it's the main reason I hate mine.
@@SammyInnit Good point Sam, and I’m inclined to agree with you. Bosch indeed makes a good grinder, but Lowe’s and other retailer's carried the same old tired and old brushed design for quite awhile. Some would argue the Milwaukee is better? Nothing shabby about DeWalt. I almost always use my corded Makita grinders, and they do very well. Appreciate the comment and insight! Peace!
The 2nd guard (the one you didn’t use) is open completely on the bottom. That would have made using the grinder disk easier to use.
Man cave tools is the best RUclipsr ever
I thank you for your support David :)
If my profit margin is that thin that it comes down to how many seconds I can save changing grinder discs I will change occupations 😊
Well said. Plus not only are you limited to what discs you can buy, but they are more expensive too.
Unfortunately the 40v grinder doesn't use X-Lock. I'm sure they will release a new 40v model that supports X-Lock at some point though.
we wil see how the 40v tools are in the future, I thank you for viewing sadi
This just popped up. I have the slide lock model being delivered tomorrow according to Home Depot tracking. I got away with years of using a die grinder but I finally need a grinder and I am on the Makita platform so this made sense. I don't have regular wheels so I am starting from scratch. Good fit all around.
I love this new tool and I thank you for viewing Scott
I think you will be happy Scott! Mak makes a solid grinder, despite what others might say. I have three of them, one cordless, or else I would jump on one of these. Please protect your eyes, and your ears! I have a friend recently go to the ER to get a piece of cut off wheel out of corner of his eye! 😳 He never plays it safe, hopefully this will get his attention! Peace!
@@ManCaverTools It arrived yesterday. It has a very balanced feel and the overmolding also feels like they got it right. Hopefully something fun comes up giving me a chance to use it.
Makita have been announcing many tools for over a year in Some cases, by the way I believe x lock has been out , from bosch like about a year ago.
yes it has and this tool has been out for about a year in different countries
@@ManCaverTools
I know I’m late to this video but quick question if I may ask. Do you know if the Bosch x lock grinder wheel/disc fits the Makita x lock grinder? Thanks in advance🤙🏻
@@boogiehara8693 Makita partnered with Bosch on the X Lock. X lock is X lock. Diablo also makes wheels for it. You can also use an X Lock wheel on a regular grinder, but X Lock MUST have X Lock.
@@matthoward1174 thanks for the input. At the time I saw Amazon had a good price on Bosch x lock cut off wheels for a 10 pack. I kind of figured any x lock would work but just wanted to be sure because I seen on a replied comment from man caver tool where someone asked him if the Makita x lock were interchangeable with other x locks and he said no. Got a little confused. Glad you chimed in🤙🏻
@@boogiehara8693 Thanks Brother. Glad to help. Depot had some decent deals on Diablo multi packs for the X Lock as well. I'm gonna stock up before the intro deals dry up.
I needed a new battery-operated Grinder, so I picked up one of these and OfCourse it had to be a Makita. Im a Makita junkie. So is the X-lock grinder is pretty cool, but is it worth it? Well that depends. To put it simply don't go out and buy a new X-lock grinder if you already have a perfectly working grinder. You will just be wasting your money. Its a cool system for attaching disks, but it does not save you enough time to be economically viable enough to go out and buy one if you already have a working grinder. Now if you are in the market for a new grinder, because you don't have one. By all means, go with the Xlock. Its a robust mechanism that will last and I think its just going to grow in popularity among manufactures, especially after Bosch's patents expire.
it is a shame that you have to buy X lock wheels for this tool
Good video. I am glad you mentioned in the video that you cannot use other discs. Therefore the X-lock means they locked you in for life to buy their discs. I didn’t see anything monumental as where I need to run out and get this tool. From what I saw it is just a gimmick to buy something and increase their profits.
No gimmick , faster + you can't mount discs the wrong way so it's saver as well. I am sure this becomes the standard so discs become cheaper
all it is new way of licking in a disc. nothing truly special about
Discs are available in many brands and styles. Not really locked into lifetime anything.
Makita for the win 🏆
You've probably long since realized or been told, but you don't need to touch the locking mechanism when fitting discs. All you do is drop one on and press it against the tool until it snaps engaged. Albeit minute, you're making a fast change slower than need be.
I figured that :) and thank you Tim
Hell yeah! Those things are sick. BRB throwing my spanners in the 🗑
lol, I thank you for viewing Joe
Like the convenience disk swap.. 👍..
Yeah
I do as well, we will see how it holds up in the future
I like you’re cutting board.where can I get one?
regarding x lock not being compatible with older disks it's better to drop old out dated technology a year too early than a year too late.
This will be an industry standard soon, much like sds.
I think its a good idea and I thank you for viewing Piston
Nice test as always, the guard on this Makita is huge. You can't juse normal discs on X-Lock grinders but you can use the X-Lock discs on normal grinders
I will be doing a test on that to see how well and x lock disc works on a regular grinder
You don't have to hold the lever up. It locks in the open position until you install a disc.
I thought I say that in the video. I thank you for viewing Donnie
The vast majority of X-Lock discs will fit on "normal" grinders no problem, it even says so on the packaging. So switching to a backup is no issue at all.
I thank you so much for viewing :)
Everyone talking about Bosch having this, yeah but more expensive.
Also why don't they incorporate the x lock in other tools like the circ saw?
Bosch is the original X lock.
Don’t sleep on Bosch sponsored standards.
(With Hilti) SDS
(With Fein) Starlock
X-Lock
I thank you for viewing Truth
@@ManCaverTools thank you for the fun content.
Hi does the paddle switch is better and more practical than slide switches or not?
how long does the battery take working
This is a phenomenal tool. If only it wasnt so loud... corded grinders tend to be quieter.
The number of available discs are quite low as of now. There are still no concrete discs available.
Everything else is perfect. The batteries last longer than expected, the price for accessories is moderate, a quick and easy tool to work with.
Mine are all loud. I have a dozen of them. Corded and cordless.
There are concrete blades for these.
I looked at it yesterday. Walked over to the grinder discs, and Home Depot doesn't have any x-lock discs yet! Lowes?
I was able to get X Lock discs at Home Depot, 4 1/2 only, no 5" yet
They had the wheels, both Mak and Freud, right next to the shiny new display, at my Home Depot, Donnie? Maybe check online?
@@georgedavall9449 thx! I'll check next time I'm in. I bought the paddle switch version.
@@donniemccrorie19 You’re Welcome, and excellent choice! I love my corded and cordless paddle switch Makitas! Did you know in some countries, they don’t say ‘grinder,’ but instead call it Makita!? Kinda like Kleenex for any brand of tissue. My third Makita is a slide switch, but it doesn’t see much use. I’ve developed a technique whereby I can control the speed when I need to, by the use of the paddle. Takes some practice, but try it when you get yours! Be safe! Peace and best to you! 👍😁✌🏻
you just need to psh the disk in order for it to click in place, instead of precicely press outward the little clamps.
Didn't Makita come out with a new hammer drill?
Yes xph14 a think
@@micjubba709 It is, just looked it up thanks.
I think they did. I saw a picture of it
Those xlock discs are 2-3 times expensive than old circle ones and I dont see point of that price.Old style is reliable and not bad at all, but with xlock you cant loose flanges and wrench.
I Thank you so much for viewing :)
Awesome grinders i have the other version with the locking wheels with tool dunno if i prefer them over the xlock dunno how reliable the xlock will be over time shall see 😁👍🤟looking forward to seeing it grind some welds and stuff dave
we will have do see in the future and I thank you for viewng Mic
#26
The x-lock looks like Bosch’s starlock
I think Bosch came out with xlock and is leading the tech to other companies. They want it to be the new standard some day. I think there was a vcg vid on xlock a couple years ago. Might be remembering wrong tho.
you are correct on that
@@troutwrangler90 Correct a Mundo
i think its time for milwaukee to get a new x lock grinder
if the X lock does well I think it should be standard.
bosch are the original or first x-lock grinder?
Yes bosch come out with xlock first
you are correct
Love makita 😎😍👍🤟thanks for video dave its very convenient the xlock like wonder how durable and reliable it will be over time tho
I thank you Mic, I do love how easy it is to switch out discs
Why is your thick grinding discs red? Whats the differences between that and the normal black ones?
are you talking about the sanding wheel?
Great review. I really want to like this tool but if the disk I need that’s available isn’t an xlock then I have to search or it’s useless. I would so easily be sold if they made an adapter for an arbor when in a pinch. I hope that’s in the future either by them or by a 3rd party.
I thank you for viewing :)
X locked, see, views, feels good, but, to me, I said , the special 's made of wheels disc , are high cost , and use , fast to last only .....2 to 4 days ....out ...times .
Kinda disappointing that I can't use regular grinding discs. Has to be x lock.
I am disappointed about that as well
I received an email from Bosch tools and they have a similar system.
They developed it.
@@thetruth5210 Bosch also develope starlock too (with help from fein) so bosch is being more innovative than anyone in making the jobsite more efficient
yes they do and Bosch is the one that made this X lock
I wish the original audio was kept , the sound tells a lot about a tool.
Hey mate ,what happens when you want to use a disk with a thread on it ,like one of those wire rope ones etc?
you screwed. X lock only on these unless if a company makes an adaptor
Same thing in Australia cost $379 🙁
It's a clever system but it won't replace the standard threaded arbor. Bosch introduced a very similar system to X-lock many years back on their earlier cordless grinders and it died out almost over night.
The reality is, most people who use a lot of grinders such as fabricators have 2/3/4/5 grinders set up at hand at any one time.
These won't be replaced very quickly if at all, SDS clic nuts or quick release nuts remove the need for wrenches and seasoned users can swap discs in as little time as the X lock system.
Not to mention most people who use them a lot can buy bulk discs from their local supply house which come in at a fraction of the cost of the X lock branded discs.
This is a system perfect for DIY and home owner types who have little experience or training with abrasive wheels but I think there's little appeal to professional users.
I have both styles. This disc swap is way easier and faster. And yes, I have a full rack of all types of grinders and I do not use a wrench for wheel change. This style is hands down easier and faster. Like you say Not so popular though. It's very handy for mobile work.
Great review!! What saw horse is that that’s in the clamp?
it is called a jaw horse and it is very handy
Awesome!! I meant what saw horse is that that’s clamping! Lol
Are all the 5" X-Lock disks interchangeable?
No :(
I would like to see this against the flexvolt advantage grinder with a 9ah or a power detect with the 8ah. I could be wrong but idk if this could really be as powerful since they dont have 21700 cell batteries for such a power hungry tool. Def no way its coming close to the actual flexvolt model. I got both dewalt and makita so i would like to know im jus not going to buy jus for x lock even though its a nice feature. I currently have the dcg418 flexvolt and the 20v dcg413 flathead model but you can never have too many grinders in my world lol. Would def get slide switch since my other 2 are paddle
Messed around with one of these in Home Depot a few days ago. I think this will be successful, and seems to be a good solid mounting system. Already have three Mak grinders, so until one of them burns up... hey Dave, what was up in that Live stream, with the impact shootout? ? I made couple comments, guess y’all didn’t see them? I think you were having audio issues? Anyhow...
👍😁✌🏻🇺🇸
yes we were, I thought I fixed the audio issues though, that is I will have to take a look at the issue but I am sorry we didnt see your comment in the stream
@@ManCaverTools no worries Dave... it appeared y’all had your hands full with audio and what not... ☺️
I've been waiting for these to hit the states. Such a great design (by Bosch, licensed to Makita). And finally an innovative guard adjustment system. I'm a Makita fanboy for sure. Now, if they would just get the 40v Max tools here...
I cant wait to get the 40v tools and I thank you for viewing Mark
I ordered the makita x lock from Amazon uk 6 months ago
Of course they are metal guards. Never seen an angle grinder with plastic guards…
some guards have a plastic extension.
Made
yes sir
how do you take care of your cordless battery, you know to avoid the other cell to be dead.
I keep my batteries in doors and I try to exercise the batteries by using them on a rotation
#Only Makita 👍
Yes sir
What music title bro?
I'm still trying to figure out why the tool comes with two identical blade guards...
I know he got two blade guards as well, and he even said "different sizes". Mine are literally identical.
Ones for grinding disc's (the open bottom guard) the other is for cut off disc's (closed bottom guard), the one mostly shown in the video is meant to be used for cut off disc's
X lock its awesome :) But some people they say its not safe :)
we will see how it is in the long run
X-lock much more safer, allows very fast stop, you can't put your disc the wrong way , much faster, and x-lock disc can go on your old grinder. 👍
Bosch patent release 2 years ago in Europe and sold à year ago to makita.And most of the disc manufacturer do it.
@@jeromeborle564 thank u for u advice my friend :) I appreciate:)
2s brake - “we’re gonna test that”
...never talks about the brake again
lol. I thank you for viewing David
hopefully make 8ah battery 18v makita
they also need to make a 21700 cell battery
@@ManCaverTools they needed to do that so long ago. Being a makita guy is like being in an abusive relationship. Would also love to see a slim 3.0
I just bought one brand new for 84.00
thats not a bad deal at all
Anybody else's handle smelled like ass? Had to spray multiple coats of sanitizing spray to get rid of the smell
Got the other one and it came with a free 5ah battery
I hate the x lock the old lock it your salf is better
we will see how it is in the future, I thank you for viewing Jb
Man i just realized theres an awwwwwweeeesome deal going on online let me know if you want me to send it to you
shoot me a link and thank you Kenny
Anytime i havent seen anyone talking about this awesome deal with dewalts 12v... ill shoot the link
12v combo and free recip for $149 🤯🤯🤯🤯🤯
Let me know if it worked for you
👍🍩☕👍🏻
Coffee time
What's up all
whats up pirate
You put the disk backwards man
there is only 1 way to put these on. its a design that needs to fit. it doesn't go in the other way. I tired
Welcome to America Makita
Yes sir lol
While this is cool it sucks that your limited on the consumables you get.
Dave not wearing gloves as he uses a power tool 99.9 % of time he does lol
Some one call OSHA on this RUclipsr
Sorry Dave I had to crack a joke (or try too) hahahahahah great video though thanks
I was told by many people that uses grinders on a daily that it is unsafe to wear gloves while using it. I was giving so much heat for wearing gloves while using a grinder lol
First
I thank you slammin
1st
I thank you pirate
🍩🍩🍩🍩🍩🍩🍩🍩🍩🍩🍩🍩🍩🍩🍩🍩
Dounts