First Year 3D-Print RC Harrier Project - This was achieved -
HTML-код
- Опубликовано: 28 авг 2024
- Jet STLs on : rc-jetprint.de...
Affiliate links to the Harrier Powerdrive:
www.turbines-r...
www.turbines-r...
www.turbines-r...
Mingda 3D-PrinterAffiliate Link:
3dmingdaoffici...
LWPLA Tutorials:
• LW-PLA 3D-Print Tutorial
If you wanna support this project, you can become my Patreon:
/ rene_rosentraeger
Or buy me a coffee :)
www.buymeacoff...
Support me on Paypal:
paypal.me/rros...
Really looking 👍! As someone who worked on Harriers must say it is very impressive.
One thing to keep in mind is it's definitely not the most aerodynamic fuselage and wings. The Harrier has almost zero glide ratio. They are very diverse in payloads. Sheer power keeps them airborne.
Good luck really looking forward to more videos. 👍
You guys have the coolest workshop too!
Thx Patrick 🙌
The custom fiber spars are outstanding. I absolutely love them. A perfect compromise and optimization almost
For a better control at VTOL, the Harrier has smal holes at the edge of the wings. At Nozzles 60° there is a little bit of thrust at the edges of the Wings to have a better controll on the Roll-Axis.
To provide turbolenzes under the Harrer at VTOL there are smal fins to protect the air cushion for crosswind, The airbrake is naccassary for a stable VTOL. Full Airbrake full Flaps for hover.
You can start and land much easyer with NOZ 60°. This called Short-Takeoff and Slow-Landing.
Thx mate! This will be the next steps👍
Das beste am 3D druck ist, das man jedes teil einfach ersetzen kann!
most RC/3D print guys will run an idea, crash it, run it again, crash it, until they figure it out...
THIS GUY did more actual science and research than the actual Harrier development team...
The real thing is a complete handful to fly,so just to get an RC model in the air is a triumph
Small tip on the servo, you can move the potentiometer (or whatever sensor it uses) and attach it directly to whatever it is turning.
I love the Av 8 Harrier .
Schönes Projekt, klasse Akzent. Nach dem ersten Wort gewusst das du Krankenversichert bist 😄
😁🙌
Love the Schwarzenegger-accent 😂.
🤣🙌
I'm enjoying following you along this journey. When it's all said and done I would love to build my own. It's always been a dream of mine to have a vtol jet.
Yes👍
Klasse konstruiert ! Und super ausgetestet , was für ein Aufwand ! Bin mal gespannt wie es weiter geht und wann das Programm zum download kommt . Well done👍👍
Danke Thomas 🙌
That's just INSANE !! My most sincere congratulations 🎉🎉.
The only thing I never understood about RC airplanes why the are so lightweight instead of reproduce the real airplane inertia.
Congratulations again for all that amazing work and for share it!
You're welcome!
Great fun to watch. Appreciate the time you take to show us all this.
And congratulations. That's amazing job...👏👏👏👏👏👏
I’m totally in awe of your engineering competence and incredible creative approach to this project. A joy to watch your video thank you so much for sharing
Welcome mate 🛫
Impressive dedication to the project. Wonderful to see your progress and process. Thanks. =)
😊👍
So many incredible DIY concepts in these videos- Danke Shon!
This is awesome that you can 3d print all these parts...
Next step... Use lost pls casting to cat the ducting parts out of brass or aluminum...
Nice summary mate…👍🏻
Amazing engineering going on there! Stunning plane!
Thx Maarten 🙌
ハイレベルな研究所のチームの様ですね。It's like a high-level laboratory team.
Great video!!
change the gearing to 1:2 on the servos, it will be cheaper and you can get your 360° rotation with 180° of servo rotation
Super interesting, love that aerodynamic studies and experimentation you guys are doing, plus all the technical problems and solutions solving, I’d love to see the next phase of the project.
But it turned out in the end, of course, it’s still impressive, I take off my hat.
Wow geniales Projekt. Richtig ausgereift und zur Perfektion entwickelt. Grüsse aus der Schweiz, René
Danke 😉🙌
you are permanently talking of the angel of attack (Engel des Angriffs) but you mean the angle of attack (Winkel der Anströmung).
Danke für den Hinweis Harald 👍
Klugsc****.
Jeder weiß was gemeint ist.
Großartiges Projekt inklusive Umsetzung und Dokumentation 😍
@@xxhomertimexx6644 kann ich mich nur anschließen.
Unnötige Korrektur.
@@retr0_fps naja, wenn du die ganze zeit unbewusst einen fehler machst, bist du doch froh wenn es dir jemand mitteilt. Vorallem ist der kommentar kein bisschen hämisch(zumindest wirkt es auf mich so)
Aber super Projekt @rene
possibly the confusion is partly due to Angels being Naval Aviation slang for Altitude, in 1,000 ft increments.
Absolute brilliance, thank you for sharing this incredible project 👍
Nice
Ich mag dein Akzent.
Cooles Projekt
Amazing. Such an interesting project. I love the scientific details. Your project is very inspiring.
Thx man 🙌
Good to see all the trial and errors in building such a awsome plane a few things that I've found that might help is I've discovered esun pla -st its flexible pla it bends instead of snaps I've been using it on drone frames and its quite good im yet to break a frame. also I use aluminium welding rods for alignment dowels sometimes they work really well and are light weight and will flex abit aswell
Cool, I'll also try this 👍
Amazing engineering 🎊!
Should be a criminal offense to depict a vtol aircraft belly sliding.
actually no
You should watch how War Thunder players land the Harrier then.
Ei riiiily leik tät! Wäry well donn- Spass ;) gutes Konzept!
Very cool. Thanks for sharing.
GREAT STUFF, Thumbs up !
😁👍
I am very excited to see how you are gonna make the thing hover since you will have to kinda stabilize that. Are you planning to run ardupilot for that?
1st kk2 but later may be ardu..
super interessanter kontent, weiter so !! Ich bleib dran und danke!!
Gerne 🙌
increíble estos tiempos son asombrosos buen video
You undertook a very difficult project.
Airbus and Boeing couldnt have done it better, but spending millions for this development
Amazing Job, well done!!
Nice to see people giving the Harrier some love! Really awsome work you guys deliver there. To be honest I just found you guys and have to say: You have a new subscriber xD
I really love fighter jets and their engeneering and its nice to see how you can actually reconstruct an awsome work of technical art with enough determination and knowledge. I really really like the way you avoided some problems and tested things out. I hope you'll continue this awsome work not just on the Harrier, but maybe on some other aircrafts, after this project.
and a tiny unimportant question (if this even gets read): Do i hear a little bit of german accent? xD It doesn't matter where you are from, but just out of curiosity
Yeah this is german, you can hear it on his maiden flight in the background, aswell in the comment section😂
@@BlackRNGesus xD
Welcome on board mate 🙌
I know you are busy and you have other projects in your mind but I have request. Can you make a F-22 RC with VTOL?
Do you mean F35b. The F22 wasn't VTOL
@@EvilEd3000 , Not F-35B. Like he worked on Su-X based on Su-47 I would like to see F-22 based VTOL and I think it will be unique and cool.
@@EvilEd3000 ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
A huge thanks for sharing your journey. I wonder if in the VTOL you'll ever try an F-35B?
You guys are incredible! Salute!
Wonderful video it would be great if you could chop off some of the high-end frequencies off the jet engine noise. Like roll off everything above 10,000 Hertz. Will be much less harsh
Love this, glad I found your channel! Definitely subscribed.
Welcome on board mate!
Incredible
Some major league engineering going on there well done 😀
Thx Julia 🙌
Klasse Projekt, weiter so.
19:57 are you guys crazy? there will be no such loads, but the approach is almost scientific =))
You smart bro good Luck
Absolutely Great
Muito show!!! 👏👏👏👏
14:20 There are servos on the market that can rotate 720 degrees even without modification, you just had to use them and that's it.
I bet the reefs micro 99 servo winches would work
Hey Bro, I don't know If you solve the problem about the rotation of servos. I think you need to modify the position of the potentiometer. You can put it on the air outlet and not inside of servo. In these case the rotation will be the same of servo.
Is solved 👍
James Dyson would approve
😅✌️
Well done, great engineering, and a lot of pations, can you build a A37B Dragonfly? Let me know?
Let's see 😁👍
Eigentlich wollte ich anfragen damit aufzuhören Teile zu zählen, am meisten Spaß machen Panzer:)
awesome video. it would also be cool if you guys did this with a 3d carbon fiber or nylon print.
inspiring!...what is the nose camera?
Because of the scale the crash in the cornfield looked like a crash in a forest!
Excellent Videos,. what make of 3d printer do you use, Also what make of lightweight pla would you recommend. Do you intend to put the harrier plans up for sale in the future . Cheers
I use the Mingda 3D Printer
3dmingdaofficial.com/?ref=2R0iJsE5rO9Gtk 👍
Ficou top 😏...
😁👌
Awesome
This is next level. Are you a senior designer at Airbus or Arianespace? Because you should be! Also, sorry - is you accent Bayern or in der nähe? Lived in Muenchen for a couple of years and still miss it! And sorry if I misplaced your accent and you are from somewhere like Hamburg 😂!
Thx mate! Berlin accent 😁✌️
@@renerosentraeger Oh sorry! I have a friend in Berlin so should really know. He is a scriptwriter. I also worked in Berlin for a while but just commuting, so don't know the local accent as well. Amazing work. Really professional engineering.
Nice hydra bro
Would be awesome to see you design and build a F14 Tomcat with working sweeping wings. I would purchase that stl
Holy cow! It's EDF? I thought that was an actual gas turbine. I thought to myself, how are you going to keep it from melting?
Yeah this jp fan sounds amazing 👌
@@renerosentraeger outstanding! Impressive and precise.
덕중의 덕은 양덕 😂
question? when all said and done will you make and sell these on market. I'm really interested in buying this to make my own. Absolutely brilliant work.
Yes it is online now on rc-jetprint.com 🛫
What 3D printer do you use please? The quality of that print looks incredible!
This one 3dmingdaofficial.com/?ref=2R0iJsE5rO9Gtk
V bro work on your Vs. This is an amazing project you're very good
Игорь Негода на коленках лучше сделает😄
Does the model have a gyroscope and a stabilization microcontroller?? for vertical takeoff from wheels and hovering in the air
Yes it has 🛫
mon avion preferer dans dcs :)
What is the camera on the nose used for recording ???
Mobius Mini 👍
If you used a lever and cam design, much like flaps, you wouldn't need 340* servos.
I thought Harriers were able to lift off vertically, and land similarly.
Que impresora 3d utilizas ?
On rc-jetprint.com 🛫
cool, now make a F-35B
Which 3D CAD do you use to draw and how much the model weighs in flight order
We use shapr3d. TOW is 2,4kg👍
Is the white one available to print?
Yes it is 👍 on rc-jetprint.com 🛫
Can you upload a file with your improvements?
Yes on rc-jetprint.com 🛫
No VTOL?
vtol on a ramp ??
prequel top gun?
Can you please provide 3D printing files?
Yes soon on rc-jetprint.com 👍
@@renerosentraeger Thank You so much. I appreciate that
AV8A
12:20 All you had to do was add locking frames over the flanges of those yellow nozzles, then you wouldn't have to change a good four direct drive setup for this cable trash...
Are you german?
The GERMAN englischschschsch
Please sir instrument provide
Check rc-jetprint.com 👍
Hidra
Please, I don't want to look picky and I'm merely trying to improve your English, so, I'll say it as it is: ANGLES, not ANGELS.
It's pronounced like MAGNET or MEGA or GARNET.
NICHT SO TIEF RÜDIGER..... KEINE KAPRIOLEN.....