First Flight JRM-01 | 3D-Print Jet Project
HTML-код
- Опубликовано: 8 сен 2024
- Get the STLs on our new website:
aerojtp.com
Get your Bambulab 3D-Printer and Material here:
shrsl.com/29j33...
*Affiliate Link
#bambulab
If you wanna support this project, you can become my Patreon:
/ rene_rosentraeger
Or buy me a coffee :)
www.buymeacoff...
Support me on Paypal:
paypal.me/rros...
STLs on: aerojtp.com
I really enjoyed your videos.
The performance of the test pilot was excellent.
He made nose-up very skillfully just before landing.(2nd landing)
What a beautiful and graceful maiden. congratulations to you all
Thanks. We are super happy 😃
Jeeze, that thing flies like it's on rails.
Does it what! We are super happy with the results! Cannot wait to see how the VTOL behaves!
Rene and his team are just AWESOMENESS 👌🏽 ❤🎉
Thank you man🙌
Much appreciated 😉👍🏻
Better performance than imagined, that's great!
👍💪✌
Oh yes! It’s great when a plan works out!
Congratulations JRM team. It is so enjoyable watching this entire process.
You are very welcome mate.
Glad you like it!
Trim ideas:
JRM-1C
JRM-1V
Lightweight versions for both.
Detailed/scale versions for both.
JRM-1C TOL- ALL ducts are capped lightest of the bunch.
JRM-1V TOL- ALL features present. Lightweight version with stilts instead of landing gear. Full feature heavy, you already know.
Final version. Detailed cockpit module for 6inch figures, & FPV Cockpit module for various camera types, dji should be considered, and a universal type.
Glückwunsch!!! Sehr geil! Ihr kennt auch keinen Schmerz wegen der Kälte :D
Lass mich kurz überlegen.....
Nein😁🙌
Its amazing how you are making work that even the americans failed to do half of, you are a talented man and an amazing team
Such a smooth flight for an rc plane!!! It look so realistic while flying
Now Lockheed has to do some reverse engineering
Lockheed doesn't engineer work. They outsource it and then claim that they engineered it😅.
Even better! If the amount offered is correct, all good 😉
Impressive as heck!! Well done. Enjoy watching your genius mind. 👍
he secretely working with OKB Suchogo
let the chinese do that. they’re masters at reverse engineering because it’s all they know how to do
Absolutely Fantastic!!!
Thx🙌
I can't wait to purchase this model so that I can print it on my Bambu P1S and X1C printers... Congratulations JRM-01 team.
Stunning!
Good job
Fantastic Bravo... Great Testing - Onwards and upwards...
Congratulations on your maidens. Looking forward to the next flights.
best flying printed plane I have seen - well done
Thank you :)
That's a pretty bird......
I like it.........
❤👀
glad to see you actually did some air flow work on it as well ...
Great work. Can't wait to see the VTOL tests!
This is going to be exiting✈️
Neither can we!
Magnificent !
Outstanding!
Nice one. Congrats and thank- you
A thing of beauty
Yesssss 😁👌
Awesome!!! from the design to implement and testing..
Congrats on a Super 1st flight ✈️!!!
Thank you 🙌
Great first flight. Developing so well
Really like your experiments and designs.
A bit hobby + some research = Big Fun :)
Wow, these back-flips were INSANE :D
I am not so much into vtols and this model is excellent in aerobatics. Would you consider releasing a simplified, lighter, non-vtol version?
Yes, just adding a landing gear and the CTOL version is ready for release.
Congrats! Plane looks so good!
First video of this channel i have seen. This looks like a F-15/F-22/mig-29. Its beautiful, and is a great design.
Glückwunsch und perfekter maiden flight💯😎👍
Danke :)
Awesome
Sehr beeindruckend, hätte mit mehr Problemen gerechnet.
Ja, so entspannend war schon lange kein Erstflug mehr👍
What a great first test session, congrats!
Your tests are amazing too...
Thank you man. Keep up your great work too!
Tailerons are good in that they leave the wingtips free of the taxing and drag inducing properties that ailerons provide. Just make sure that there is no yaw coupling as a result of improper differential taileron movement. I know everything.
Perfect flight ❤
Thx buddy :)
Was a Great result and we are very happy with the outcome! Better than expected!
Glad this project is in the air now😅
Think so too 😁🙌
Awesome !!!. What about installing some fences at the top of the wing to avoid the spread of the turbulence?
Will be tested 👍👍
Don't think it's necessary imo or would have a good aesthetic.
Great idea! We have implemented !
Es war mir ein Fest dir beim Programmieren und einstellen deiner neuen Frsky X20s helfen zu können. Zum Glück sprechen Martin und Ich beim Fliegen die selbe Sprache 😜 und so konnten wir wirklich sehr schnell Super Ergebnisse erzielen ❤
Top Teamwork :)
Super Ergebnis!
Hallo Rene, bei Deiner SUXR V1 ist ja die Konzeption der Steuerung mit Ruderflächen und Vektorsteuerung ganz ähnlich. Im Gyro des Empfänger musste ich mich entscheiden: Standardmodell oder Delta. Für die Steuerung ist Standard für die Ruder notwendig und Delta für die Vektorsteuerung notwendig. Schlussendlich habe ich den Empfänger FrSky SR8 PRO auf Standard Gyro programmiert um damit die Ruderflächen für den Flug zu stabilisieren. Dann habe ich mit Patch-Kabel über S-BUS einen zweiten Gyro angesteuert. Dieser Hobbyeagle A3SUPER4 steuert und stabilisiert die Schubvektorsteuerung. Mit dieser Konfiguration kann ich in jeder Flugphase jedes einzelne Servo präzise einstellen und trimmen. Mein Sender ist eine FrSky Taranis X-Lite S . Gruß Gert
Ja, ich denke so mache ich das auch :)
What an awesome project and engineering skills!!
Would you release the CAD file someday? I really wanna print the JRM 1😍
We will release the stls.
Excellent work.. 🙂
I was confused when you where saying "drop nose" I thought you meant the nose of the aircraft like the Concord does. I think you are talking about the slats. The "flaps" on the edge of the wing right?
Slats are sepparated small "wings" that extend in front of the main wing. While as on a Droop-Nosed wing a part of the wing "droops". It´s not so commen on airliners, but most Fighter Jets got these too.
I think you should also print those elevators with two perimeters, because there will be still a lot of load caused by the air resistance.
Congrats. very nice project 👏👏👏👏
Thanks. We are very happy with the results!
So cool to see your sweat and tears in the design paying off so much! Congrats on getting off the ground! Is there any chance you will make the files available for purchase? I’d pay good money lol
Yes, after adding a landing gear we will make the stls available.
ace combat fans be hyping on this
ขอบคุณมากครับกับสาระดีๆ
You're welcome mate 💪
What's a flight controller board are you using?
No Flight Controller ! Only FrSky sr10 Plus
Ohh, thanks.
bei qoadcopter werden die flight controller / gyros oft auf kleinen gummi dämpfern gelagert, sollte helfen gegen die probleme, wenn ihr das nicht schon gefixt habt :) Sieht echt super aus , glückwunsch :)
Danke!
FELICITACIONES René y equipo !!!.
Una demostración de investigación, esfuerzo, logros y aeromodelismo !!!
Mi respeto, y aplausos.!
Muchas gracias amigo😁🙌
Fantastic. How did you compensate for the shift of C.G. while carrying that camera boom? Is that why the front VTOL jet bay was empty?
Just moving the battery backwards.
Hey what will a jrm 02 look like possibly a su 75 or a MiG 41 I love your projects a good stress reliever after a few long days that are exhausting
They look good. Why not.
This team did amazingly on the JRM!
Apprechiate it.
Thanks 🙏🏻
This is not only a great video, but a beautiful plane. Please tell us that you will be selling models when you are done.
Yeah, think so ;)
Wie kann man sich eigentlich so ein RC-Flieger selber drucken und bauen? Gibt es dort irgendwann mal eine Anleitung käuflich zu erwerben?
Ja, evtl noch diese Jahr.
Der fliegt richtig gut,Gratulation!
Der Start sieht auch sehr einfach aus,kann man die Druckdaten dann kaufen?
Mfg
Ja, vllt. noch dieses Jahr, wir arbeiten dran.
@@renerosentraeger super,bin fix am start dann
@@renerosentraeger Wo wird man die Dateien dazu kaufen können? Bin grade ganz zufällig auf dein Projekt gestoßen und finde es super interessant!
"140kmh yeah thats an *okay* speed"
first to view and first to like, I'm the best
Absolutely 😁👌
That jet bearly makes the edf's work hard!! That's amazing work!!
How does everyone like their flysky radios? I have the spektrum ix20 but with the price of their receivers, it's expensive to get all my planes outfitted.
That's the point.
Great video, what make of onboard camera did you use?.
It´s a mobius mini.
Looks heavy or underpowered. Maybe it needs 2x64mm EDF instead of 50 mm
how much for the STL files? that is one of the best EDF planes i have seen.
Comin soon.
🔥🔥🙌🙌
I haven't followed the development. Is the model dynamically stable or has relaxed stability like the F-16?
With the actual CG it´s stable.
that thing flies so nice, is it LW-PLA ?
Yes, it is. A wonderful material.
Have you ever thought about having a transforming wing that goes from conventional to KFM-2 airfoil for slow flight?
Yes, it´s on my mind.
Greaty job guys, very beautifull, whats filament use for print? thanks for share
LW-PLA
What material are you using to print this? LWPLA? PETG?
Lwpla and pla.
I am thinking its not that low speed handling is not as important as you think. You engines should supply a thrust to weight ratio of 1:1 or better, so all you need to do is to get the jet in the air using the VTOL fans and then direct the nose steep upwards and give full power on the main engines and voila, that was your transition. This is supposed to be a fighter jet so passenger comfort in this phase is not an issue. In fact what you really want to concentrate on is high speeds and maneuverability at high speeds. After all, in combat, the faster you fly and the more maneuverable you are the greater your chances of survival. Meaning I think you might be going the wrong way by trying to make it as stable and well behaving as possible. Agile and fast that is what you are looking for.
That said, great job and really really nicely done.
We have the best of both worlds! Super slow speed at 28km/h for loitering and transition or aerobatics and high speed at 140km/h
Hi, can you explain the tradeoffs between 3d printed and fiberglass builds?
Check the Testing playlist for this 🔧
Rene, fantastic work! The stl files will be the small wing I take it?
STLs are in the making 💪
Yes they will be the small wing. We are just finalising the panel line details and getting the retractable undercarriage tested - stay tuned
can we buy stl or something ?
it fly great !
Release is end of the month.
so how far off is the vtol part?
Landing gear when?
Soon
We are in the testing phase
👏👏👏...😜👌
now make a full scale of the aircraft, go ask your government and tell them you'll make them filthy rich.
Haha, let´s see..
Glückwunsch! 👍👍👍 -sehr gut gelungen, aber nicht das schönste Wetter für den 1. Flug.
Temperatur und Wolkenuntergrenze waren beide über Null, also tiptop 😅💪
💯☝💪👍
.stl? 😂
Soon
Hire a jet polite see what they say
stop cutting your shots every half a second I'm getting sea sick.