Sorry guess I didn’t word that correctly. If you will “Send me an email” to doubletfishing@outlook.com I will reply back to your email with the sheets attached directly. Thanks
I hope you keep on giving us this content. You have showed me so many things I didn't know about my Garmin unit. And ways to use it that I wouldn't have thought of... Thank you sir appreciate you!!!
Just today I purchased a 10” and a 9” unit. They will be installed next week. I am giving up on my Lowrance units as they just don’t work for me. Thank you so much Rick for these wonderful tutorials. I will watch them all with great interest. Kindest regards,
Can’t say enough good about this channel. Rick really stands by his word with sending the spread sheets he talks about. He also followed up with me with a few questions I had. Very grateful for the time he put into this! Thank you again!!!!
I am refurbishng an old Ranger, which is a much more extensive process than I imagined. Of course, I already added a Garmin Force trolling motor, as my research indicated it is the best and since I often fish out of the back I have a separate new Livescope unit for the back of the boat with my older Livescope unit for the person using the trolling motor. I have all Garmin Ultra units with a 9 on the console, a 10 at the front and a 12 at the back. I just found your channel and your data is outstanding for setting up and maintaining these units. Excellent is my best description. When I am in another fisherman's boat I get so tired of them not knowing the ability of their units or how to use them. If they will be running my boat, I will be able to use my own electronics or tap into theirs as everything is networked. I could not afford a $80,000 bass boat but could afford an old bass boat and add top quality equipment. I will eventually watch all of your material and suggest to to my friends that they view the data from your RUclips channel. Thank you very much.
Well thank you for the kind words Donald, it means allot, how is the integration between the force TM and the Echomap chartplotter maps? If you don’t mind sharing I’d love some pictures of your restoration project to share with our newsletter community!! Email doubletfishing@outlook.com have a great day
Thank you! I've had my 73sv for years and just now found how to mark using the tear drop! How did you learn the garmin system so well? Back in the day i had a job training payroll clerks how to do payroll on desktop computers instead of cardboard timecards. That was way easier then learning how to use my Garmin!! 😅
Hi Steven, I find the easiest way to learn is to play with it “off the water” when you have time rather than getting frustrated on the water trying to find fish. I developed a spreadsheet of settings for reference I keep with me when I have a silver moment and forget. I’d be happy to share it if you want to send me an email, I can reply back with the sheets attached. Doubletfishing@outlook.com
Thank you for your response. Your videos have been very helpful , I’ve installed The unit haven’t had time to go through all particulars. I’m chomping at the bit to get out on the water. Thanks again.
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens ruclips.net/user/postUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
Thanks for all you do. I had no idea that these chart plotter’s had so much in them. Your videos really help a lot. I have a 73 Clearview. That I just bought for my JetSki.
I bought the Garmin Echomap with the panoptix forward facing transducer. Everything worked perfectly until my 4th trip out. My Icon vanished and I really don’t know what happened. I haven’t had the opportunity to go back through the setup to see if it comes back. Have you or anyone else run into this issue. I can say this that the last time it worked I caught 3 largemouths that I know I never would have caught without it. The forward facing is pretty darn sweet if it’s working! Thanks
There are “restore sonar default” options under the installation menu in each of the sonar screen menus. Be careful about using the factory reset in the main screen menu settings it could cause you to have to start all over again
I recommend 32GB but you can get by with 16GB. Important you do not exceed 32GB!! Larger cards are formatted differently and the chartplotter will not read them. Have a great day!!
Thank you !! Definitely made it easier for me . Just got the 93sv , I had it on for an hour without disabling the sonar , will that be OK?, I didn't know you had to do that . Thank you !! Your videos definitely help out . Appreciate your videos .
Mine does, but it may not be ultra high definition, call Garmin with your serial number and confirm before you purchase anything. 800 800-1020 use the callback feature and they always call back
Just send me an email with you model number Doubletfishing@outlook.com or sign up for the newsletter in the description link and the welcome email will have clickable links
You bet, send me an email with the model and I’ll send you one. Doubletfishing@outlook.com, I’m out of town right now be back Monday. If you want to download them now sign up for newsletter and you’ll receive a welcome email with the links. mailchi.mp/a2a9cda72675/double-t-fishing-newsletter-sign-up
So how do you see arches. My 1st time out this weekend i cut on the fish symbols appearance. So i saw fish on screen no arches nor a place to turn on. Didn't see anything in clear view
Hi, you won’t see arches in clear vu just traditional. Arches show up in traditional 2D sonar when the fish symbols are turned off. It also depends on how fast you are moving and water depth. In traditional 2D sonar I look for objects with 2 or more colors suspended in the water. Have a great day!
Check your email spam and junk folders, if it’s not there send me an email and which model you have and I’ll reply back with the attachments this evening after work Doubletfishing@outlook.com
It won’t be “gain” that term is used for the traditional 2D sonar. What you are looking for is “brightness ”. Go to the side vu screen and tap menu on the bottom right, select sonar setup, on screen control then change from range to brightness, I have a free cheat sheet if you want to email request. Doubletfishing@outlook.com
You may have already addressed this and I can't locate the answer. If I have my bow and console units networked, both are 93sv UHD, and I have the transducer set to auto, if I go to move with the outboard and pull up the trolling motor, do all charts/sonar then read off the back transducer? I have my trolling motor transducer set to read off of the built in for the traditional sonar and ClearView. I didn't know if it switched to the back transducer if set to auto when I yank up the trolling motor. Thank you in advance.
No it won’t switch unless it is in “auto”. When in auto it will use the “built in” transducer as default if it’s available, if the built in is not available it will then swap to the network and search for an available transducer. Not much downside to auto on a bow unit attached to a trolling motor. Hope that helps
Hi Jim, go to the link below and sign up for the newsletter and you’ll get an email with link buttons to the sheets or just send me an email with which chartplotter you have and I’ll send them to you. mailchi.mp/a2a9cda72675/double-t-fishing-newsletter-sign-up
Question. I have both my 106 sv’s linked together with the hdmi cable and when I try to shut down one unit it shuts down both. Same thing when I power up. Also when I first put my unit in the cradle it automatically powers up. I think this started after one of the updates. Thanks in advance.
Unfortunately that is the way they are programmed, I’m not sure what revision that started with but it’s been that way since I got mine in 2021. I believe you can sleep the devices independently by quickly pushing the power button and select “sleep device” then just press the power button again to wake it. Thanks Rick
I took it down cause it was out of date, the link to the daily fishing journal should be in the video subscription. The spreadsheets are a good reference and they are free!! If you didn’t get a copy email me and let me know which unit you have and I’ll reply back with the attachments Doubletfishing@outlook.com
Without the water surrounding the transducer acting to dissipate heat the transducer can overheat depending on the ambient temperature and if the sunlight is directly hitting it. It also depends on the power of the transducer and duration, a GT54 is 350W while the GT56 is 500w, I’ve accidentally left it on for 20-30 minutes without damage.Have a great day!!
For basic functions it is not required to operate the chart plotter, you can use Garmin Express on your computer for updates if desired. If you have complex networks or premium maps some features require active captain. I use active captain mainly as a backup for user data like waypoints but even that can be done without the app. Have a great day!!
There should be red buttons at the very bottom of the newsletter, may need to “right click” on the images and select “download images” or just send me an email and request the spreadsheet, include which model you have. Email: doubletfishing@outlook.com
Hi Danny, two ways to get it, the first is to go to this link mailchi.mp/a2a9cda72675/double-t-fishing-newsletter-sign-up And sign up for the newsletter. You’ll receive a welcome email with red buttons that will open the spreadsheet for download. Second is just send me an email Doubletfishing@outlook.com Let me know which models you have and I’ll attach the sheets to a reply, have a great day!!
No problem buddy, send me an email and which unit you have and I’ll attach the sheets, if you have a PC look in file explorer there should be a folder in the top left call “downloads” or email doubletfishing@outlook.com
Open the charts screen, then select menu at the bottom right then select quickdraw contours/settings, from there you can select record, user display and community contours to put in an offset value.
You bet, you can either click the link in the description and it will send you download buttons or just send me an email to doubletfishing@outlook.com and I’ll reply back with the attachments
I got an email a few days ago and a couple more from what looked like a cell phone, it keeps coming back. Sorry. Open this and download the sheets using the links at the bottom of the newsletter thanks Rick eepurl.com/iEWonw
Hello sir, very useful videos thankyou very much I'm in India tamilnadu I want to new model so please help me and support me please reply i give me some idiya
I’m not quite understanding “data graph”? Shoot me an email, see if we can figure it out Doubletfishing@outlook.com I have both a plus and the UHD they are pretty similar.
Link to Spreadsheet and newsletter mailchi.mp/a2a9cda72675/double-t-fishing-newsletter-sign-up
Would like to receive the spread sheets for my new 94sv
@eddisonrice732 please send me an email to doubletfishing@outlook.com and I’ll reply back with the sheets attached, thanks Rick
Yes that takes me to the sign up page I have done it twice and still have not received it, thank you.
Sorry guess I didn’t word that correctly. If you will “Send me an email” to doubletfishing@outlook.com I will reply back to your email with the sheets attached directly. Thanks
I would like to receive the spreadsheet for garmin echomap ultra 126sv with gt54.
Was a great video.
your videos are invaluable thank you, I just bought an ECHOMAP 93sv about a week ago. Tight Lines, learning so much!
Have a great day!
OK.... I found it. This is FINALLLY by far the best instructive video I have watched to date about my Garmin!!!! Thank you, thank you, thank you....
Glad you found it useful!!
I hope you keep on giving us this content. You have showed me so many things I didn't know about my Garmin unit. And ways to use it that I wouldn't have thought of... Thank you sir appreciate you!!!
Thank you Jeremy, I appreciate the kind words of encouragement!! Have a great day
Just today I purchased a 10” and a 9” unit. They will be installed next week.
I am giving up on my Lowrance units as they just don’t work for me.
Thank you so much Rick for these wonderful tutorials. I will watch them all with great interest.
Kindest regards,
Appreciate the kind words Hank! Have a great weekend.
Can’t say enough good about this channel. Rick really stands by his word with sending the spread sheets he talks about. He also followed up with me with a few questions I had. Very grateful for the time he put into this! Thank you again!!!!
I am refurbishng an old Ranger, which is a much more extensive process than I imagined. Of course, I already added a Garmin Force trolling motor, as my research indicated it is the best and since I often fish out of the back I have a separate new Livescope unit for the back of the boat with my older Livescope unit for the person using the trolling motor.
I have all Garmin Ultra units with a 9 on the console, a 10 at the front and a 12 at the back. I just found your channel and your data is outstanding for setting up and maintaining these units. Excellent is my best description.
When I am in another fisherman's boat I get so tired of them not knowing the ability of their units or how to use them. If they will be running my boat, I will be able to use my own electronics or tap into theirs as everything is networked. I could not afford a $80,000 bass boat but could afford an old bass boat and add top quality equipment. I will eventually watch all of your material and suggest to to my friends that they view the data from your RUclips channel. Thank you very much.
Well thank you for the kind words Donald, it means allot, how is the integration between the force TM and the Echomap chartplotter maps? If you don’t mind sharing I’d love some pictures of your restoration project to share with our newsletter community!! Email doubletfishing@outlook.com have a great day
Thank you! I've had my 73sv for years and just now found how to mark using the tear drop!
How did you learn the garmin system so well?
Back in the day i had a job training payroll clerks how to do payroll on desktop computers instead of cardboard timecards. That was way easier then learning how to use my Garmin!! 😅
Hi Steven, I find the easiest way to learn is to play with it “off the water” when you have time rather than getting frustrated on the water trying to find fish. I developed a spreadsheet of settings for reference I keep with me when I have a silver moment and forget. I’d be happy to share it if you want to send me an email, I can reply back with the sheets attached. Doubletfishing@outlook.com
Thank you for your response. Your videos have been very helpful , I’ve installed The unit haven’t had time to go through all particulars. I’m chomping at the bit to get out on the water. Thanks again.
Have a great day Steve!!
GREAT info for an ol' fuddy-duddy who's not up on all this tech stuff. Thanks a BUNCH!
Have a great day!!
Love your videos I've learned so much since last spring bc of them greatly appreciate your time and videos tight lines and be safe on the water.
Best tutorial on You Tube. Thanks for the information.
Appreciate the support John!!
Thank you thank you thank you. The trouble shooting and set up has been amazing, J.T.
You bet Jim!!
Great info thanks! Very helpful. Another way to look the options. Has helped a lot.
Have a great day!
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens ruclips.net/user/postUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
Thanks for sharing
Thanks for all you do. I had no idea that these chart plotter’s had so much in them. Your videos really help a lot. I have a 73 Clearview. That I just bought for my JetSki.
That’s awesome!! You’re the first in 2-1/2 years of RUclips ever mentioned putting one on a Jetski, have a great day
Great and very informative!! Always with great info. I been missing out on vids but catching up. Sorry!
Thanks, have a great day!!
Dude! U are an Awesome tutorialist!! Thankful for your expertise and vast knowledge of Garmin systems 🎣🎣✅️✨️
Thanks for watching!!
I bought the Garmin Echomap with the panoptix forward facing transducer. Everything worked perfectly until my 4th trip out. My Icon vanished and I really don’t know what happened. I haven’t had the opportunity to go back through the setup to see if it comes back. Have you or anyone else run into this issue. I can say this that the last time it worked I caught 3 largemouths that I know I never would have caught without it. The forward facing is pretty darn sweet if it’s working! Thanks
If you are using the black box might check the power and transducer connection. Hope you get it figured out.
Just found your channel, very helpful, subscribed! :)
Thanks! Have a great day
when you make changes and you decide to go back to the original settings , how do you reset it back to the default settings? Great info!!
There are “restore sonar default” options under the installation menu in each of the sonar screen menus. Be careful about using the factory reset in the main screen menu settings it could cause you to have to start all over again
Great videos. Thank you very much.
Appreciate the support Bruce!
Just got a Garmin with our SeaDoo Switch. Glad we found your channel.
Dis you install a 32GB micro disk?
I recommend 32GB but you can get by with 16GB. Important you do not exceed 32GB!! Larger cards are formatted differently and the chartplotter will not read them. Have a great day!!
Great video,now waiting for lake to thaw to get out and try using my new SV95
Do you have a video on how to map the bottom while trolling? Thanx
Here you go John
How to Make Quickdraw Maps!!!
ruclips.net/video/H0ay-RE5WDI/видео.html
Thank you !! Definitely made it easier for me . Just got the 93sv , I had it on for an hour without disabling the sonar , will that be OK?, I didn't know you had to do that . Thank you !! Your videos definitely help out . Appreciate your videos .
Likely you didn’t hurt the transducer, I’ve done it a few times but it’s best practice not to run it outside the water, have a great day!!
Thank you for this content.
Very welcome
Sir your Content is GREAT plz continue ! Question: will the GT54 Transducer work w/the Garmin Echomap Plus 93SV unit??
Mine does, but it may not be ultra high definition, call Garmin with your serial number and confirm before you purchase anything. 800 800-1020 use the callback feature and they always call back
Love your videos
Thanks!! Have a happy new year
Great video thank you. I have 2 106sv networked together can u turn them on or off by there self
Unfortunately they work in tandem when networked, I believe you can put them to “sleep” independently
Thank You Sir!
Have a great day Michael
@@DoubleTFishing Same to you sir!
How do I get the bar at the top of the graph that shows speed, GPS, etc.?
Your videos are really helpful, how can i order your spreadsheet for my echomap UHD93SV?
Just send me an email with you model number
Doubletfishing@outlook.com or sign up for the newsletter in the description link and the welcome email will have clickable links
iI just purchased a 106 SV and I would like to get a copy of your speadsheet.
You bet, send me an email with the model and I’ll send you one. Doubletfishing@outlook.com, I’m out of town right now be back Monday. If you want to download them now sign up for newsletter and you’ll receive a welcome email with the links. mailchi.mp/a2a9cda72675/double-t-fishing-newsletter-sign-up
So how do you see arches. My 1st time out this weekend i cut on the fish symbols appearance. So i saw fish on screen no arches nor a place to turn on. Didn't see anything in clear view
Hi, you won’t see arches in clear vu just traditional. Arches show up in traditional 2D sonar when the fish symbols are turned off. It also depends on how fast you are moving and water depth. In traditional 2D sonar I look for objects with 2 or more colors suspended in the water. Have a great day!
Can you do a similar video like this showing off the new OS on the new garmin units? The UHD2
Unfortunately I’m not affiliated with Garmin and don’t have a UHD2. Like you I have to purchase products off the shelf, have a great day!!
That’s quite a bit of awesome info
Have a great day Charles!!
I clicked on the link to sign up for the newsletter, but not sure where the spreadsheet is located? Please advise.
Check your email spam and junk folders, if it’s not there send me an email and which model you have and I’ll reply back with the attachments this evening after work
Doubletfishing@outlook.com
Got it all set. The model I just bought is the Echomap UHD 74SV+Transducer, does your spreadsheet apply to this model?
Yes sir!!
I would like the spreadsheet for the 106sv Ultra and 73sv
Send me an email and I’ll attach them in a reply. Doubletfishing@outlook.com
Hello, How can I put the gain button om my sidevü screen(ecomap UHD2 72sv). Tnx
It won’t be “gain” that term is used for the traditional 2D sonar. What you are looking for is “brightness ”. Go to the side vu screen and tap menu on the bottom right, select sonar setup, on screen control then change from range to brightness, I have a free cheat sheet if you want to email request. Doubletfishing@outlook.com
You may have already addressed this and I can't locate the answer. If I have my bow and console units networked, both are 93sv UHD, and I have the transducer set to auto, if I go to move with the outboard and pull up the trolling motor, do all charts/sonar then read off the back transducer? I have my trolling motor transducer set to read off of the built in for the traditional sonar and ClearView. I didn't know if it switched to the back transducer if set to auto when I yank up the trolling motor. Thank you in advance.
No it won’t switch unless it is in “auto”. When in auto it will use the “built in” transducer as default if it’s available, if the built in is not available it will then swap to the network and search for an available transducer. Not much downside to auto on a bow unit attached to a trolling motor. Hope that helps
@@DoubleTFishing it does. Thank you very much.
Good content. I am trying to locate the PDF with your recommended settings but am not seeing it. I am subscribed.
Hi Jim, go to the link below and sign up for the newsletter and you’ll get an email with link buttons to the sheets or just send me an email with which chartplotter you have and I’ll send them to you.
mailchi.mp/a2a9cda72675/double-t-fishing-newsletter-sign-up
Email. Doubletfishing@outlook.com
Question. I have both my 106 sv’s linked together with the hdmi cable and when I try to shut down one unit it shuts down both. Same thing when I power up. Also when I first put my unit in the cradle it automatically powers up. I think this started after one of the updates. Thanks in advance.
Unfortunately that is the way they are programmed, I’m not sure what revision that started with but it’s been that way since I got mine in 2021. I believe you can sleep the devices independently by quickly pushing the power button and select “sleep device” then just press the power button again to wake it. Thanks Rick
@@DoubleTFishing thanks for replying in such a timely manner. You’ve been a great help the last few years.
Thanks Mike!! Hope you had a good holiday
Anyway I can get spreadsheet emailed to me for Echomap UHD 73 ( Main center council)
And Echomap Ultra 12SV for live scope.
You bet! Send me an email letting me know which model you have. Doubletfishing@outlook.com
Maybe I just figured it out, thanks.
Holler back or email if you need help👍🏼
where is the data graph icon on my GARMIN ECHOMAP PLUS 93SV
How do I get your journal on Amazon? I did a search and and can’t seem to find it. Thanks.
I took it down cause it was out of date, the link to the daily fishing journal should be in the video subscription. The spreadsheets are a good reference and they are free!! If you didn’t get a copy email me and let me know which unit you have and I’ll reply back with the attachments
Doubletfishing@outlook.com
why would it hurt the transducer if you dont disable?
Without the water surrounding the transducer acting to dissipate heat the transducer can overheat depending on the ambient temperature and if the sunlight is directly hitting it. It also depends on the power of the transducer and duration, a GT54 is 350W while the GT56 is 500w, I’ve accidentally left it on for 20-30 minutes without damage.Have a great day!!
Do I have to have active captain ?
For basic functions it is not required to operate the chart plotter, you can use Garmin Express on your computer for updates if desired. If you have complex networks or premium maps some features require active captain. I use active captain mainly as a backup for user data like waypoints but even that can be done without the app. Have a great day!!
Nice video but I'm done with updates. It better be mandatory for me to do it going forward.
Don’t see a link for spreadsheet, see the newsletter but not spreadsheet
There should be red buttons at the very bottom of the newsletter, may need to “right click” on the images and select “download images” or just send me an email and request the spreadsheet, include which model you have.
Email: doubletfishing@outlook.com
Never mind my bad got them, thankyou
Awesome information Dbl T! Thanks for sharing. 🫶🏽
Have a great day!!
I would like spread sheets for 106sv ultra ... Thank you
Email me doubltfishing@outlook.com, let me know which model you have, thanks for watching!!
My NEW 94SV does NOT HAVE option to disable the transducer!!!
Good information, I assume this is on the UHD2 models. Thanks for sharing
How can a fellow get one of them spread sheets for 106sv and 93sv both echomap
Hi Danny, two ways to get it, the first is to go to this link
mailchi.mp/a2a9cda72675/double-t-fishing-newsletter-sign-up
And sign up for the newsletter. You’ll receive a welcome email with red buttons that will open the spreadsheet for download.
Second is just send me an email
Doubletfishing@outlook.com
Let me know which models you have and I’ll attach the sheets to a reply, have a great day!!
@@DoubleTFishing thanks
My ignorance is getting in the way! I have downloaded the spreadsheet but can’t find it to print it off.
No problem buddy, send me an email and which unit you have and I’ll attach the sheets, if you have a PC look in file explorer there should be a folder in the top left call “downloads” or email doubletfishing@outlook.com
I sent you an email
Sounds good, I normally reply to them in the evenings. Still have the whole 9-5 job thing going on😂
I sent the emails out so it should be in your inbox, thanks
Checked spam inbox still nothing it’s all good sir
🙂👍🏻👍🏻
Thanks Lucky!!
How do I make the depth offset on quick draw ?
Open the charts screen, then select menu at the bottom right then select quickdraw contours/settings, from there you can select record, user display and community contours to put in an offset value.
Can I get a copy of your spreed sheet for SV93
You bet, you can either click the link in the description and it will send you download buttons or just send me an email to doubletfishing@outlook.com and I’ll reply back with the attachments
Still have received spreadsheet
I got an email a few days ago and a couple more from what looked like a cell phone, it keeps coming back. Sorry.
Open this and download the sheets using the links at the bottom of the newsletter thanks Rick
eepurl.com/iEWonw
Thank you @@DoubleTFishing
how do i get pdf on 106
Send me an email to doubletfishing@outlook.com and I’ll attach the cheat sheets, have a great weekend
Hello sir, very useful videos thankyou very much I'm in India tamilnadu I want to new model so please help me and support me please reply i give me some idiya
Have a great day!
Link to Spreadsheet and newsletter
mailchi.mp/a2a9cda72675/double-t-fishing-newsletter-sign-up
where is the data graph icon on my GARMIN ECHOMAP PLUS 93SV
I’m not quite understanding “data graph”? Shoot me an email, see if we can figure it out
Doubletfishing@outlook.com
I have both a plus and the UHD they are pretty similar.