ONEWHEEL PINT X TYRE CHANGE - EASY SIMPLE FAST
HTML-код
- Опубликовано: 10 янв 2022
- I changed the stock slick tyre that came on my Pint X for a Hoosier treaded tyre. It only took about 2-3 hours but I did encounter a few problems along the way. I hope this one helps you out with any problems you may have encountered whilst attempting to do the same.
Enjoy.
.
.
.
.
.
Almost in F - Tranquillity by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Best tire change video I've seen. Easy to understand. Thank you.
Glad you found it useful buddy.
I cried when you stomped on the level.
🤣
I have been doing this for the past 6 hours. It says easy this is the farthest from the truth it is the most physical and mentally challenging thing I have ever done. Good luck if you are trying this
You’ll get there buddy, have faith. 💪🏼
Did you manage it in the end?
So much work, you make it look easy
I need to do it on my XR now but I just can’t be bothered. It’s a real hassle.
Damn. I was tempted to head up to Miami and have the Enduro done on my Xr and Px but you just made that look way to easy. Hell I work at Homdepot that'll be cake everything I need is right there. Good video and thanks.
You’ll be fine. I was a little nervous to do it to begin with.
Good luck. 💪🏼
Great video! You can also remove the valve core when deflating first tire and not put it back in until you have seated the bead in the new tire. Speeds up the deflating in order to put in sealant. Probably save about as much time as it took to write this out haha.
😂
I'll remember that for the next time. 👍
good job on the level recalibration 🤘
Yeeeeeeheww! Ready for some rough riding now! :D
Damn that’s a lot of work for one wheel.
Merci vidéo très utile pour moi 👍
Je vous en prie.
My axle screws are being a real pain. Any tips?
Great how to. Smooth until 3:25 where you seem to effortlessly pull the tire off by peeling and holding it? Aside from tips on an upper body workout, what am I missing one hour in and I’m bout to get out my cutting torch. 😬
Solved! You pried the deep well (corded) side of the hub off first! The shallow (uncorded) side leaves a nice gap to grip and pull through.
@@skling Well done buddy, that was the one part i meant to mention but unfortunately forgot. So have you done it now?
@@eekdestroy5329 Yes! Success. Getting the new tire on was also tricky. I ended up buying a tire spoon, but success! Thanks for the video.
Good video thank u!
It's possible to send an url for order the same tires? 😁
Hi. If you just search for 'hoosier tyres', it'll bring up your local dealer. You have to call them up to order. 👍
Use 2x2 thick timber instead of 2x1 then it won’t snap and you won’t bend your precious level!! 😜
Hey nice video! Is it compulsory to remove valve core ?
Thanks.
You don’t have to, it’s just easier to get the air out quickly. You wouldn’t be able to get the tyre sealant slime in there without taking the valve core out either.
@@eekdestroy5329 Ok thanks ! So what your feeling with pint and treaded tire for off-road ?
@@Victor-rv8kc the treaded tire makes all the difference. It’s a must have.
Hi, what tyre is that? Is it good for on and off road? Nice video 👍
It’s the Hoosier treaded Pint tyre and it’s perfect for on and off road.
Which ratchet tool did you use for the torx bits? I need that in my life :(
It’s just a standard mini set I think.
Why do you put it up to 70psi ?
To seat the bead. You have to keep going until it pops back in.
How many lost on the Range with those Tires?
It's hard to tell but for me it doesn't matter. I just love the feel of the treaded tyre.