Thats how I learned to drive a semi. An early 80s Mack R Series. Gears were so tall it would chug up a mountain if you could find them in the first place. I love these old cars. Thank you for that
Yes, that's the right way. It works for most pre-war crash boxes. I've used the same method for early syncro boxes too to help move things along. And you're also right about how many people shift a Model A incorrectly....here on RUclips, and everywhere else. When I learned to drive a crash box in the 70's, there were still folks around that knew how to help you learn. Today we have the internet...and many people teaching it wrong. It was a good move on your part to use the unrestored '29, that way no one could trash-talk the trans and your driving instruction. Thanks for this video Paul.
Thank you! Yea, I figured nobody could say I was using a 39 synchro trans or something this way. My Sport Coupe shifts even smoother and would have made a better video, but like you said...
Paul - I finally got to really drive my A for the first time after getting it and going through the engine, etc. Thanks for this video! It helped tremendously. My key learning was to just take your time - if you are in a rush to get somewhere, take a different car. Every other car I've had has been a synchronized manual so I didn't realize how much I was accustomed to just lazily slamming the stick into the next gear regardless of the RPM. And I thought myself to be a fairly precise driver. The A makes you pay much closer attention!! I love it.
For some, it is easier to always double-clutch a Model A. Too much thinking about up or down, just DC every shift and it goes easier for some. I have only been driving Model A's for 54 years so I still have lots to learn, but everyone I have helped learn I have them DC up and down.
Thanks to Paul's video I'm learning how to do it "the Paul way"... but I only started driving the Model A 10 years ago... so less to un-learn. I think what double clutching on the upshift does it give you the right timing or delay. I sometimes find myself double clutching on the upshift out of habit :) I also think the timing/delay is different when the gearbox is cold as presumably the oil is thicker... still learning!
I saw a "How to" shift video where the gentleman was sitting at a dead stop, put the clutch in, and attempted to shift into first. However, the gears immediately started grinding. He backed off, tried again with the same result, only he just forced it into gear after grinding. I couldn't understand why it would grind while sitting still. Is it a clutch adjustment problem? Or maybe the car is idling too fast? Both? Lol I just got my very first A, and your videos have been absolutely invaluable. From the "Secret Handshake" to your shifting style, maintenace and beyond, it has given me a wonderful starting point to launch from. I'd never even sat in a Model A until after buying mine, let alone driven one. I've got a lot of practice ahead, but you gave me the confidence to take those first few steps. Thank you!!!
My guess would be his clutch needed to be adjusted, of it was worn and no adjustment was left in it? Thank you for the kind words! So glad to hear the videos have been helpful to you. Are you a MAFCA member yet? Planning on going to Model A Days in September? If you go, it would be an honor to shake your hand and tell you thanks in person.
@@ModelAcould you inform me of the shift pattern? I can’t find any info on where first gear is. Engine off, it shifts buttery smooth, I just don’t know which way is what gear
My opion on this - and I'd love to hear yours, too - is that, as long as you hear no grinding noise, there is no "wrong" way to do it. I like double clutching because one doesn't have to keep the clutch pressed in while waiting for the gears to slow down. Just like I prefer putting the car into neutral when sitting at a traffic light. The lower the rpm you shift at, the quicker you can shift, because the gear speeds are closer together. If you just get your car rolling in 1st, you can immediately stick it into 2nd without any hesitation - Jack Bahm demonstrated that brilliantly in a video of his. You demonstrated how to shift without double clutching - and did it beautifully. But I wouldn't call double clutching wrong - because it doesn't hurt the transmission either, if done properly. Greetings from Germany Adrian
No grinding is the goal. That's a fact. Pumping the clutch excessively puts more wear on the mechanism than just holding it down tue extra second waiting for the motor to slow down.
@@ModelA Oh yes, didn't think of that one. I had only heard about throwout bearings wearing quicker when leaving the clutch pressed at a stop light - but sure, there's more to a clutch than just that.
shifting a non synchro trans when upshifting you have to let the motor slow down with the clutch disengaged so it is going the speed it will be at when in the higher gear. That way the gears will be rotating at the same speed when they are engaged. When downshifting you have to do the opposite, speed the motor up (double clutch) so it is going the speed it will be at in the lower gear. That's why Model T's were popular, they had a different type of transmission and easier to shift. I know you are an A guy......
That is how I shift, I see people double clutching all the time but it isn't necessary. Actually if you listen to the engine speed and know how things work you don't have to double shift at all. The best I saw was my uncle who grew up driving all kinds of cars and trucks back in the day, anyway he could shift his model A without using the clutch! Just listened and shifted at the proper time, it was amazing to see.
@@aliceshaw8265 I wrote a lengthy discourse on this for another nice video recently. "speed match the gears" is correct terminology in my experience. You're finding the correct speed of each gear. And yes, in stop and go traffic on a busy street, no 5 cars back behind you is gonna appreciate a snails takeoff from a light. At 14 years of age, my dad smiled big at me and said, " you know, at your age, I could kick the lever from 1st to second and second to third." I already had the touch, but it took a few practice tries before I got it.
Greetings from Australia where we drive on the 'other' side of the road :) (The GAV control is on the steering column which is actually pretty handy!) Thank you Paul for making this video. I was taught to double clutch for both up and down shifting.... so I tried your method. There were a few 'crunches' while I was trying it out (hey it's OK, the gears can't get out!) but after a few goes I got it... and the whole way home I was saying to myself "I've being doing it wrong ***THE WHOLE TIME***" !!! :) I still find myself double clutching up shifting, but I'll get the hang of it! My clutch and I thank you! :) OK next Paul video to follow... brake adjustment!
You should make a How to drive a Model A video. I guess the double clutching is the main thing, but as a "civilian" I would not be mad seeing a video of you explaining how the steering wheel, gear shifter, clutch feels and works and perhaps how you use sound (and smell perhaps) when you drive.
Ha ha! Smell!! If you check out the video where I review the Model A, the last half of the video is pretty much a how to drive. Search for "why the ford model a is the best American car ever made" and you'll see it.
@@ModelA Yeah, I would love to know how a Model A smells. I don't know Model A's, but I love old Volkswagen buses and they smell a mix of oil and exhaust and sometimes with a dash of petrol fumes - or burnt clutch or hot brakes. I would love to know if Model A owners also use smell like that. And sound, driving an old VW there are many sounds and noises, but I know what are good, normal noise and rattling so I can recognize new and worrysome noises. I think there are many things you as a Model A owner take for granted that the people watching your videos from outside the Model A community would love to know about. I am watching a lot of car videos on RUclips and got recommended your channel, so I am sure I am not the only one knowing nothing about Model A, but still want to watch videos of them :)
@@EspenX Yes, I am sure there are a lot of Model A nuances that we take for granted or don't give any thought. I'm sure the same goes for VW's. Model A's do have a smell all their own. I'm not quite sure how to describe it, but if I walk into someone garage and they have a Model A, I can smell it right off the bat. It's like a mix of old grease and wool.
@@ModelA I love it! Grease and wool, I would never have guessed :) My previous reply was sort of ideas if you want more views on your videos. RUclips algoritms must love your channel, because if I as a Norwegian with no particular interest in Fords or Model A and I got your video suggested, I would think there are a huge number of RUclips users that would love your stuff. But for us it would be the videos that does not require prior knowledge of Model A's except loving and knowing cars in general. Don't mean to suggest you make your channel into clickbait entertainment or anything like that, but there are millions of people out here that would enjoy seeing a guy like you with a talent for both talking about cars on videos and knowing Model A's also talk to us that are not in the vintage Ford community. (And I have to ask: Wool? I don't know if it is an English word, but is it because of lanolin for rust protection (sheep's oil)?
he doesn't say it, or maybe he's not aware of it, but he's doing a crude sort of "rev-matching". and unless you know what you're doing, there will be grinding and excessive wear. best to know what rev-matching is and how it is accomplished under any and all conditions. it's not only useful to do it on transmissions without synchronisers, but with them too, as it will less stressful on the gears. the trouble with not knowing that rev-matching is being practiced here, is that if the revs fall below the optimum point where shifting is smoothest (and it WILL happen A LOT of times) the engine will need to be revved back up in order to bring it up to the optimum point for shifting. he doesn't even mention this. and surprisingly double clutching, despite what is shown, is NOT necessary when downshifting if rev-matching , again, is used.
@@ModelA thanks for the compliment! :) no video necessary, as its explained in my comment. but here's a good animation of the workings of a sliding gear transmission. from it, it sould be clear as to what rev-matching vs double clutching differ and why one may be preferrable over the other... ruclips.net/video/wCu9W9xNwtI/видео.html
Your method won't work with straight cut gears like the Model A without significant wear on the gear teeth. That is the difference. I was being sarcastic earlier. Rev matching works great on a gearbox designed for it, the Model A was not.
It's Sunday. I'm enjoying this immensely. This is another helpful video Paul. .....But a bit opinionated as to "the right way". Do you know that many Semi Trucks have non-synchronized transmissions, and that their driver shifts up and down through 10 or more gears without using the clutch, all day every day? He does it on level ground, uphill, downhill, and on all sorts of road surface qualities, with different loads, too.He does not use the clutch to accomplish this. In my very humble opinion, your description is "Model A shifting 101" only. I appreciated a comment below, "as long as you hear no grinding noise, there is no wrong way to do it". In the heyday of the Model A, due to the A's snappy performance, there were many high range speed shifts from stop light to stop light. Boys will be boys ya know? By today's standards, it would look like a couple tortoises goin' at it. Of course us grown ups revere these wonderful, old machines, and wouldn't think of shaving a few chunks of metal off the gears by missing a shift in a downtown, street race! An adequate description of shifting is too lengthy here. But I notice that in many descriptions, I never saw anyone describe the correct use (positioning) of the throttle. One used the term "blip" the throttle and that's gettin' closer, but I suggest that a skilled driver of a non-synchronized tranny doesn't "blip" either; he puts the throttle where required and moves the shifter at the right speed (out of gear, into neutral, and on into the next gear) to get the shift made without clashing. Keep the videos coming, Mr. Shinn
I have driven many large trucks and equipment with unsychronized transmissions. I thought I did mention that this video was how to shift a Model A, even in the title. Thanks!
Again, very informative video. Is there any advice out there for a 29’ Model A pickup truck that doesn’t seem to want to go into reverse? It’s been started regularly but hasn’t moved in over a year.
I’m trying to learn how to shift in my model A but I keep grinding a little bit. I’m not trying to force the gear and of it starts to grind I back off. I’m not doing any permanent damage right? Seems like a lot of these transmissions grind a bit but I’m still concerned lol.
Hell, I learned to double clutch in my 2015 Ford. When you do it right it's literally effortless. But it is absolutely about patience, and unfortunately no one has that in modern cars. Even without double clutching I've got people on my bumper while I'm slipping the clutch from a stop.
Nice explanation. I've watched your other videos on this sweet car. Interesting comment that it drives and handles better than your restorations. That's a neat car to own. Congratulations.
@@ModelA I adjusted the clutch about a year ago using tips from the Les Andrews book, except for getting in there to adjust the fingers independently; which might have been a bit beyond my tool selection at the time. It all looked and felt OK, and the adjustment didn't make any difference in that shift. At a stop with the clutch depressed, engine running, I can shift into 1-3 easily, indicating a complete disengagement as far as I can tell. The car does drive smoothly in all gears, doesn't pop out of any gear, and the 2-3 shift is as easy as can be - just like in any of the Drive your A videos here. If I can figure this out, I'd drive it a lot more often.
Hmm.. Need someone who has a lot of experience to drive your car and see what's up. I can just keep telling you to check everything, but you may not actually have a problem.
@@ModelA I do live close to Arizona Model A, and the owner, Sammy Guthrie, has told me to bring it in so they can check it out. Which I will do, just not so comfortable driving it in traffic like that which is why it hasn't happened yet. Unless I can get someone from the local club to drop by and give me an opinion.
If you double clutch you double clutch every shift. If not then just float. Floating if done right will give you more life out of the clutch and gears.
Yea, these are after all old ladies, slow 🐌 ...I have never dlb clutch from 2nd to 1st. . And very excellent video work and your narrative is great but you're a HAM too so that figures....
I've never known double clutching to help shifting with anything, to me it's just a play with your mind, most old vehicles when down shifting do not want to fall into gear until your going slow enough for that gear to be in use, just like on an 8N tractor when shifting up or down there is a window of opportunity and if you miss it you miss it, I mean tell me how double clutching actually helps, it doesn't, same with old school big trucks with two unsynchronized gear boxes, double clutch means nothing imo, good video, thank you.
It's also the way I used to shift in my land rover. A while back I had an issue with a failed part on the clutch pedal of my Ford Escort. Some kind of plastic "automatic adjuster" that meant the clutch pedal no longer worked at all. I managed to drive over 200 miles back home without a clutch. Simply put it into first gear and turn it over, a couple of jerks forward and you're away. Double declutching (even without a clutch) allows it to change down a gear. Changing up is as simple as just hesitating as you cross neutral and listening out for the right engine revs before feeling it into gear. Obviously coming to a complete standstill is a pain as the only way to pull away again involves a restart of the engine.
Challenge here is … I can hear you are grinding teeth a bit with your method shifting down. .. and … Thats not the way my dad did and tough me. He did (and I do) like you but double clutched fast after each other before bring-it in to gear. I almost never grind. My great great grandfather did (as the family rumour states) the same when he bought our Ford A in 1930. And he must have known best 😂 Any way, I pass down my great great grandfather’s method to my kids. My kids by the way are the 5th generation driving our Ford A Tudor and he gearbox has never been renovated 😮
@@ModelA ahhh …. Here you cheated a little by using - in lag of an english word - in between throttle. Much better. 🧐😂 Very similar to how our family does 😂 though we combine with a double clutch.
most beautiful transmission whine i've ever heard
It truly becomes second nature to drive these cars smoothly. Being engaged and actually having to drive the car makes it a very rewarding experience.
Agreed!
Thank you!! My buddy offered to let me drive his model a and I was nervous about shifting properly. You explained it perfectly!!
Glad it helped!
Thats how I learned to drive a semi. An early 80s Mack R Series. Gears were so tall it would chug up a mountain if you could find them in the first place. I love these old cars. Thank you for that
Yes, that's the right way. It works for most pre-war crash boxes. I've used the same method for early syncro boxes too to help move things along. And you're also right about how many people shift a Model A incorrectly....here on RUclips, and everywhere else. When I learned to drive a crash box in the 70's, there were still folks around that knew how to help you learn. Today we have the internet...and many people teaching it wrong. It was a good move on your part to use the unrestored '29, that way no one could trash-talk the trans and your driving instruction. Thanks for this video Paul.
Thank you! Yea, I figured nobody could say I was using a 39 synchro trans or something this way. My Sport Coupe shifts even smoother and would have made a better video, but like you said...
Yes this is the way - So many double-clutch when upshifting which is certainly not called for or necessary. Love all your content Paul!
Thanks for the clarification. I'm trying to learn all I can about these so when I finally find mine.
Paul - I finally got to really drive my A for the first time after getting it and going through the engine, etc. Thanks for this video! It helped tremendously. My key learning was to just take your time - if you are in a rush to get somewhere, take a different car. Every other car I've had has been a synchronized manual so I didn't realize how much I was accustomed to just lazily slamming the stick into the next gear regardless of the RPM. And I thought myself to be a fairly precise driver. The A makes you pay much closer attention!! I love it.
Congratulations!!! We are all proud of you a d wish you many more successful drives!
For some, it is easier to always double-clutch a Model A. Too much thinking about up or down, just DC every shift and it goes easier for some. I have only been driving Model A's for 54 years so I still have lots to learn, but everyone I have helped learn I have them DC up and down.
That's OK too. Even though it is not necessary.
Thanks to Paul's video I'm learning how to do it "the Paul way"... but I only started driving the Model A 10 years ago... so less to un-learn. I think what double clutching on the upshift does it give you the right timing or delay. I sometimes find myself double clutching on the upshift out of habit :) I also think the timing/delay is different when the gearbox is cold as presumably the oil is thicker... still learning!
I saw a "How to" shift video where the gentleman was sitting at a dead stop, put the clutch in, and attempted to shift into first. However, the gears immediately started grinding. He backed off, tried again with the same result, only he just forced it into gear after grinding. I couldn't understand why it would grind while sitting still. Is it a clutch adjustment problem? Or maybe the car is idling too fast? Both? Lol
I just got my very first A, and your videos have been absolutely invaluable. From the "Secret Handshake" to your shifting style, maintenace and beyond, it has given me a wonderful starting point to launch from. I'd never even sat in a Model A until after buying mine, let alone driven one. I've got a lot of practice ahead, but you gave me the confidence to take those first few steps. Thank you!!!
My guess would be his clutch needed to be adjusted, of it was worn and no adjustment was left in it? Thank you for the kind words! So glad to hear the videos have been helpful to you. Are you a MAFCA member yet? Planning on going to Model A Days in September? If you go, it would be an honor to shake your hand and tell you thanks in person.
@@ModelAcould you inform me of the shift pattern? I can’t find any info on where first gear is. Engine off, it shifts buttery smooth, I just don’t know which way is what gear
My opion on this - and I'd love to hear yours, too - is that, as long as you hear no grinding noise, there is no "wrong" way to do it.
I like double clutching because one doesn't have to keep the clutch pressed in while waiting for the gears to slow down. Just like I prefer putting the car into neutral when sitting at a traffic light.
The lower the rpm you shift at, the quicker you can shift, because the gear speeds are closer together.
If you just get your car rolling in 1st, you can immediately stick it into 2nd without any hesitation - Jack Bahm demonstrated that brilliantly in a video of his.
You demonstrated how to shift without double clutching - and did it beautifully. But I wouldn't call double clutching wrong - because it doesn't hurt the transmission either, if done properly.
Greetings from Germany
Adrian
No grinding is the goal. That's a fact.
Pumping the clutch excessively puts more wear on the mechanism than just holding it down tue extra second waiting for the motor to slow down.
@@ModelA Oh yes, didn't think of that one. I had only heard about throwout bearings wearing quicker when leaving the clutch pressed at a stop light - but sure, there's more to a clutch than just that.
Right. You should be in neutral at a stop light with foot off the clutch pedal.
shifting a non synchro trans when upshifting you have to let the motor slow down with the clutch disengaged so it is going the speed it will be at when in the higher gear. That way the gears will be rotating at the same speed when they are engaged. When downshifting you have to do the opposite, speed the motor up (double clutch) so it is going the speed it will be at in the lower gear. That's why Model T's were popular, they had a different type of transmission and easier to shift. I know you are an A guy......
That is how I shift, I see people double clutching all the time but it isn't necessary. Actually if you listen to the engine speed and know how things work you don't have to double shift at all. The best I saw was my uncle who grew up driving all kinds of cars and trucks back in the day, anyway he could shift his model A without using the clutch! Just listened and shifted at the proper time, it was amazing to see.
@@aliceshaw8265 I wrote a lengthy discourse on this for another nice video recently. "speed match the gears" is correct terminology in my experience. You're finding the correct speed of each gear. And yes, in stop and go traffic on a busy street, no 5 cars back behind you is gonna appreciate a snails takeoff from a light. At 14 years of age, my dad smiled big at me and said, " you know, at your age, I could kick the lever from 1st to second and second to third." I already had the touch, but it took a few practice tries before I got it.
I love the sound of this engine also nice explaining!
Many thanks!
Greetings from Australia where we drive on the 'other' side of the road :) (The GAV control is on the steering column which is actually pretty handy!) Thank you Paul for making this video. I was taught to double clutch for both up and down shifting.... so I tried your method. There were a few 'crunches' while I was trying it out (hey it's OK, the gears can't get out!) but after a few goes I got it... and the whole way home I was saying to myself "I've being doing it wrong ***THE WHOLE TIME***" !!! :) I still find myself double clutching up shifting, but I'll get the hang of it! My clutch and I thank you! :) OK next Paul video to follow... brake adjustment!
Awesome! Good job Ant!
very nice, blowing the dust off the ole 29 Model A Roadster today so needed the refresher
Glad to help, Corey!
You should make a How to drive a Model A video. I guess the double clutching is the main thing, but as a "civilian" I would not be mad seeing a video of you explaining how the steering wheel, gear shifter, clutch feels and works and perhaps how you use sound (and smell perhaps) when you drive.
Ha ha! Smell!! If you check out the video where I review the Model A, the last half of the video is pretty much a how to drive. Search for "why the ford model a is the best American car ever made" and you'll see it.
@@ModelA Yeah, I would love to know how a Model A smells. I don't know Model A's, but I love old Volkswagen buses and they smell a mix of oil and exhaust and sometimes with a dash of petrol fumes - or burnt clutch or hot brakes. I would love to know if Model A owners also use smell like that. And sound, driving an old VW there are many sounds and noises, but I know what are good, normal noise and rattling so I can recognize new and worrysome noises. I think there are many things you as a Model A owner take for granted that the people watching your videos from outside the Model A community would love to know about. I am watching a lot of car videos on RUclips and got recommended your channel, so I am sure I am not the only one knowing nothing about Model A, but still want to watch videos of them :)
@@EspenX Yes, I am sure there are a lot of Model A nuances that we take for granted or don't give any thought. I'm sure the same goes for VW's.
Model A's do have a smell all their own. I'm not quite sure how to describe it, but if I walk into someone garage and they have a Model A, I can smell it right off the bat. It's like a mix of old grease and wool.
@@ModelA I love it! Grease and wool, I would never have guessed :) My previous reply was sort of ideas if you want more views on your videos. RUclips algoritms must love your channel, because if I as a Norwegian with no particular interest in Fords or Model A and I got your video suggested, I would think there are a huge number of RUclips users that would love your stuff. But for us it would be the videos that does not require prior knowledge of Model A's except loving and knowing cars in general. Don't mean to suggest you make your channel into clickbait entertainment or anything like that, but there are millions of people out here that would enjoy seeing a guy like you with a talent for both talking about cars on videos and knowing Model A's also talk to us that are not in the vintage Ford community. (And I have to ask: Wool? I don't know if it is an English word, but is it because of lanolin for rust protection (sheep's oil)?
Great video. Thanks! I actually used to be able to shift my 1967 Chevelle without using the clutch. It really is a feel and rpm thing.
Right on!
Were you aware that you can lift the shifting lever and swing it up to the dash to give more legroom for a third passenger?
How many miles will the gears last internally....not just clutch
Millions if not abused
thank you this is every helpful I wish to have my own model A someday I hope in the next 2 two 5 year
he doesn't say it, or maybe he's not aware of it, but he's doing a crude sort of "rev-matching". and unless you know what you're doing, there will be grinding and excessive wear. best to know what rev-matching is and how it is accomplished under any and all conditions.
it's not only useful to do it on transmissions without synchronisers, but with them too, as it will less stressful on the gears.
the trouble with not knowing that rev-matching is being practiced here, is that if the revs fall below the optimum point where shifting is smoothest (and it WILL happen A LOT of times) the engine will need to be revved back up in order to bring it up to the optimum point for shifting.
he doesn't even mention this. and surprisingly double clutching, despite what is shown, is NOT necessary when downshifting if rev-matching , again, is used.
Wow! You must be an expert! Where is YOUR video showing how it's done?? We all need to learn from an expert!
@@ModelA thanks for the compliment! :) no video necessary, as its explained in my comment. but here's a good animation of the workings of a sliding gear transmission. from it, it sould be clear as to what rev-matching vs double clutching differ and why one may be preferrable over the other...
ruclips.net/video/wCu9W9xNwtI/видео.html
Your method won't work with straight cut gears like the Model A without significant wear on the gear teeth. That is the difference. I was being sarcastic earlier. Rev matching works great on a gearbox designed for it, the Model A was not.
It's Sunday. I'm enjoying this immensely. This is another helpful video Paul. .....But a bit opinionated as to "the right way". Do you know that many Semi Trucks have non-synchronized transmissions, and that their driver shifts up and down through 10 or more gears without using the clutch, all day every day? He does it on level ground, uphill, downhill, and on all sorts of road surface qualities, with different loads, too.He does not use the clutch to accomplish this.
In my very humble opinion, your description is "Model A shifting 101" only. I appreciated a comment below, "as long as you hear no grinding noise, there is no wrong way to do it". In the heyday of the Model A, due to the A's snappy performance, there were many high range speed shifts from stop light to stop light. Boys will be boys ya know? By today's standards, it would look like a couple tortoises goin' at it. Of course us grown ups revere these wonderful, old machines, and wouldn't think of shaving a few chunks of metal off the gears by missing a shift in a downtown, street race!
An adequate description of shifting is too lengthy here. But I notice that in many descriptions, I never saw anyone describe the correct use (positioning) of the throttle. One used the term "blip" the throttle and that's gettin' closer, but I suggest that a skilled driver of a non-synchronized tranny doesn't "blip" either; he puts the throttle where required and moves the shifter at the right speed (out of gear, into neutral, and on into the next gear) to get the shift made without clashing.
Keep the videos coming, Mr. Shinn
I have driven many large trucks and equipment with unsychronized transmissions. I thought I did mention that this video was how to shift a Model A, even in the title. Thanks!
Again, very informative video.
Is there any advice out there for a 29’ Model A pickup truck that doesn’t seem to want to go into reverse? It’s been started regularly but hasn’t moved in over a year.
Pull the shift tower and find out what is going on in the gearbox
Great info!!! My buddy is going to let me drive is '31!
Sweet!! Please report back and let everyone know how it went!
A fantastic explanation. thank you Paul.
That was informative. Thank you.
I’m trying to learn how to shift in my model A but I keep grinding a little bit. I’m not trying to force the gear and of it starts to grind I back off. I’m not doing any permanent damage right? Seems like a lot of these transmissions grind a bit but I’m still concerned lol.
Practice!!! And a clutch that will fully disengage
Hell, I learned to double clutch in my 2015 Ford. When you do it right it's literally effortless. But it is absolutely about patience, and unfortunately no one has that in modern cars. Even without double clutching I've got people on my bumper while I'm slipping the clutch from a stop.
Tell me about it....
Just think, women back in the day could drive these no problem.
Perfect explanation!
Glad it was helpful!
Thank Paul I well start looking for alt
Hay que ajustar ese cambio.
“Granny shifting, not double clutching like you should”
Read the owner's manual. I am doing it exactly like the Ford Model A owner's manual says.
@@ModelA It's a quote from the first Fast and the Furious movie
@@ManBunBeardDude Oh! Sorry, man. Never saw those movies.
@@ModelA Trust me you're better off that way.
@@MichaelFoster117 Hahaa! Now, you got me curious...
Will that downshifting work in a 39?
I suppose so
Nice explanation. I've watched your other videos on this sweet car. Interesting comment that it drives and handles better than your restorations. That's a neat car to own. Congratulations.
Thank you! If you're ever in the area, drop by and check it out in person.
@@ModelA where is it at?
@@MrBrendog67rat Where gold was discovered in California
Hey Paul
When in 3rd gear I lose acceleration and can't seem to get it to work. Any ideas?
Your motor is not making enough power.
@@ModelA How am I going to get more power?
I have put in new parts and seems to run good, until 3rd gear. Do you have a video or what are my options?
@@adamthompson6932 Sorry, no video on "How come I don't have any power in 3rd gear". Start with your timing (there IS a video for that).
@@ModelA thank you
@@adamthompson6932 Maybe starving for fuel? Check fuel flow, filter etc?
what's the other lever next to the stick shift
overdrive
The chrome lever is the emergency brake.
Gas pedal on the floor?
Yes
Scout crafter sent me over. Nice video.
Thanks for coming. Scoutcrafter is awesome!
Ist das in der Mitte vom Armaturenbrett ein Alien??😂😂😂😂😂 Viele Grüsse aus Germany
Thought it was non synch. Thanks for the video. If I know me, I'll try and float it lol.
Correct. Non-sync.
Mine absolutely will not to that, 3-2 downshift grinds no matter what I try, I think it's time to remove the trans to see What is wrong.
First, check clutch adjustment. The clutch has to be capable of full disengagement before you can shift smoothly.
@@ModelA I adjusted the clutch about a year ago using tips from the Les Andrews book, except for getting in there to adjust the fingers independently; which might have been a bit beyond my tool selection at the time. It all looked and felt OK, and the adjustment didn't make any difference in that shift. At a stop with the clutch depressed, engine running, I can shift into 1-3 easily, indicating a complete disengagement as far as I can tell. The car does drive smoothly in all gears, doesn't pop out of any gear, and the 2-3 shift is as easy as can be - just like in any of the Drive your A videos here. If I can figure this out, I'd drive it a lot more often.
Hmm.. Need someone who has a lot of experience to drive your car and see what's up. I can just keep telling you to check everything, but you may not actually have a problem.
@@ModelA I do live close to Arizona Model A, and the owner, Sammy Guthrie, has told me to bring it in so they can check it out. Which I will do, just not so comfortable driving it in traffic like that which is why it hasn't happened yet. Unless I can get someone from the local club to drop by and give me an opinion.
@@mattfarahsmillionmilelexus That would be the way to go.
I had a 31 Coupe in Pre-Internet days. I thought my tranny was bad because it was so "whiney" . Turns out, that's "normal operation".
Hahahaa! Darn.
If you double clutch you double clutch every shift. If not then just float. Floating if done right will give you more life out of the clutch and gears.
I'm just teaching what the owner's manual says to do.
ruclips.net/video/vsIO4RgCB88/видео.html
Yea, these are after all old ladies, slow 🐌 ...I have never dlb clutch from 2nd to 1st. . And very excellent video work and your narrative is great but you're a HAM too so that figures....
I've never known double clutching to help shifting with anything, to me it's just a play with your mind, most old vehicles when down shifting do not want to fall into gear until your going slow enough for that gear to be in use, just like on an 8N tractor when shifting up or down there is a window of opportunity and if you miss it you miss it, I mean tell me how double clutching actually helps, it doesn't, same with old school big trucks with two unsynchronized gear boxes, double clutch means nothing imo, good video, thank you.
so whats the issue? Thats the way I change gear in my 1962 land rover. never had any problem.
No issue. Just showing people who are new to this how to do it.
It's also the way I used to shift in my land rover. A while back I had an issue with a failed part on the clutch pedal of my Ford Escort. Some kind of plastic "automatic adjuster" that meant the clutch pedal no longer worked at all. I managed to drive over 200 miles back home without a clutch. Simply put it into first gear and turn it over, a couple of jerks forward and you're away. Double declutching (even without a clutch) allows it to change down a gear. Changing up is as simple as just hesitating as you cross neutral and listening out for the right engine revs before feeling it into gear. Obviously coming to a complete standstill is a pain as the only way to pull away again involves a restart of the engine.
Challenge here is … I can hear you are grinding teeth a bit with your method shifting down. .. and … Thats not the way my dad did and tough me. He did (and I do) like you but double clutched fast after each other before bring-it in to gear. I almost never grind. My great great grandfather did (as the family rumour states) the same when he bought our Ford A in 1930. And he must have known best 😂
Any way, I pass down my great great grandfather’s method to my kids. My kids by the way are the 5th generation driving our Ford A Tudor and he gearbox has never been renovated 😮
You ought to upload a video of you shifting a Model A and share it with us.
@@ModelA will do when back from Holliday.
How is my shifting in this video? ruclips.net/video/URO_jkdCIlc/видео.html
@@ModelA ahhh …. Here you cheated a little by using - in lag of an english word - in between throttle. Much better. 🧐😂 Very similar to how our family does 😂 though we combine with a double clutch.
I drive that car almost every day. How does it compare to your driving that you promoted earlier?