Hello I just found you as I like watch anyone that does all kinds of diy. As well who make me smile and laugh. I am about to spray my metal kitchen chairs, so I have to see how you do your light fixture. Keep smiling.
Thanks for the tips.. Could you kindly add: 1) how to paint larger piece..like table...specifically how far to hold can from object, & what technique to use re: back & forth..up & down...which best? 2) how to prep can to store leftover paint for reuse...like how to best clear the nozzle so paint wont dey on it & block it. Thanknyou
Loved the video. I'm painting a metal sheet backsplash behind my stove an aged copper. Would recommend a clear coat over that, since it'll need to be cleaned frequently of cooking grease?
It sound like it will be gorgeous! Yes, I would. In any situation where you will be frequently cleaning a clear coat is recommended. You can pick the sheen you want from matte to glossy.
Really? What spray are you using? There are several things that delay drying. Wet weather. Cold. Humidity. Drying needs near perfect conditions. Other than that it can take time. You can (if it stays sticky) clear coat it. Use a spray clear like Rustoleum 2x clear. I’m really curious what type of paint you used. Let me know what happens.
Thanks for the tutorial! Out of curiosity, do you have any experience with painting nickel-plated zinc? I’m currently trying to use Testor’s enamels to paint some replica keys made of nickel-plated zinc, but I’m not sure what would be the best primer for the job. What would you recommend?
Hi Fred if the plating is coming off in any way you want to scrub it away. It will continue to flake if you don’t. The 2X paint has a build in primer that is really good for most applications. Otherwise a self etching primer for surfaces that need more endurance. What is it that you’re painting?
@@JunkinwithStacy It’s a set of fancy-looking metal keys, each about 4” long; they’re pretty new, though. The plating isn’t flaking at all, just got scratched in a couple tiny places. So you say self-etching primer would work on both nickel and zinc? Also, would Testor’s enamel paints adhere well to that primer? Thanks for your help!
If they’re purely decorative (as in being hung on a wall and not handled) it would probably be fine without the primer. The Testor’s enamel will work over the self etching primer. It should work on nickel and zinc.
Hi Stacey! So, 2-3 coats are fine ... I was looking for teansparent acrylic spray on metal but I think this is a good example of what a good coating is.
@@JunkinwithStacy I did 5 😆😆😆..I'm an anxious extremist lol. Have you tried the Epoxy Spray ? I think it can be more resistant than acrylic, specially for metal pieces, copper jewelry etc
I’m thinking about buying a can of this but in dark brown. I have a strip of my lanie aluminum I want to paint becaues I got house paint all on it and could not get it Off. So decided just to paint it up
When you’re sanding for paint to stick to a surface you just need to make light scratches over the surface. So a 120 grit is fine. You could use a 220 grit. Just stay away from the lower grits because the goal isn’t to take the original surface off.
Great job!!! I have a question. I'm trying to do the same to a metal desk....but I'm not sure if it's metal! How do I know? The table feels like metal but is super light even though it's a tall two tier table. What type of paint should I use? Right now it's a rustic mud green and I want it mat white. Help me please!!! :))
If you can’t be sure you should use a primer like kill adhesion. It sticks to slippery surfaces so you paint won’t come off. On Friday I will post and adhesion tutorial so you can see how it works.
I purchased a pair of cute lamps. White shades but the bases are black. Got them for my granddaughter and I want to paint them silver or chrome. Is it necessary to add a finish coat over the paint when done? Thanks for sharing.
When I use the rust oleum chrome I do not clear coat it. I believe most spray paints will have the protectant build in. It should say on the back of the can of you need to clear it. I will say that a lamp isn’t going to be handled too much like a drawer pull or knob, so I wouldn’t worry too much. It should be amazing! 🤗
Hey Stacey great vid .! I was just wondering, I have an spare fridge sitting in the shed I would like to to repaint do you think the rustoleum 2x will do the trick ..! Thanks John
I have a question. I’m currently up cycling a metal table. I’ve purchased metallic paint for the color. Should I use a black base coat/ primer for it to have a better shine/ color finish? I’m thinking about whenever I do a mirrored finish. I always go over the mirror effects with black before I finish and it looks better than just using the mirror effects alone.
With products like color shifting and mirror than yeah definitely. If you’re using the chrome spray paint it’s not necessary. What product are you thinking of using?
You can sand it first and then wipe it down with a damp cloth to remove the dust. Unless you think there grease or anything really dirty on it. Dawn dishwashing liquid can tackle it if you believe it’s greasy.
I found 2 cheap wall sconces with glass globes at a thrift shop. I’m not sure what they are made out of. It’s not metal. My husband said maybe chrome. I ordered some antique gold spray paint on Amazon. My spray paint WILL NOT stick to them. It immediately starts running. We sprayed them first with a metal primer. Primer did wonderful. We do very light sprays and it just starts running. Any suggestions?
Well not knowing exactly what you’re working with makes it hard to answer this question. If you have chrome or a chrome coated resin then you’ll need to sand it really good so the paint has something to bite into. Like sand it until the surface is dull. I’m surprised it’s not sticking to the primer. I’m so curious about these.
@@JunkinwithStacy We didn’t sand any part of it. Primer stuck to it like glue. We used a spray paint I had never heard of before from Amazon. As soon as my husband starting spraying it, it started running. We are going to sand today & try again. Wish us luck!
this is a good tutorial for a person like me who's never done this b4
That's what people were asking for so I'm glad it's helped, Zoe! If there are more videos that you want to see let me know how I can help!
Love your humour, ha,ha, thankyou for great ideas.x
Thank you
Hello I just found you as I like watch anyone that does all kinds of diy. As well who make me smile and laugh. I am about to spray my metal kitchen chairs, so I have to see how you do your light fixture. Keep smiling.
Welcome to the channel Kelly! Good luck on those chairs! I hope they turn out amazing.
Thank you very much! I'm planning on doing this to a vanity light and tp holder and wanted to get it right the first time :)
You’re so welcome!
Wow thanks so much for the helpful tips! Followed everything you said and it came out PERFECT!!
You’re so welcome. I hope it helps.
Thanks for the tips..
Could you kindly add:
1) how to paint larger piece..like table...specifically how far to hold can from object, & what technique to use re: back & forth..up & down...which best?
2) how to prep can to store leftover paint for reuse...like how to best clear the nozzle so paint wont dey on it & block it.
Thanknyou
*dry on nozzle
That will have to be its own video. But yes I can show all that. It will take a bit of time but I will.
Loved the video. I'm painting a metal sheet backsplash behind my stove an aged copper. Would recommend a clear coat over that, since it'll need to be cleaned frequently of cooking grease?
It sound like it will be gorgeous! Yes, I would. In any situation where you will be frequently cleaning a clear coat is recommended. You can pick the sheen you want from matte to glossy.
@@JunkinwithStacy Great!! Thanks.
How did you avoid painting your fence and house? Cute shade. Perfect for the candlestick lamp.
It looks really close on the video but in reality it’s far enough away. That’s where I paint all the time and so far so good. 🤞
I’m going to pant the metal legs of my new tables before putting it together and I am so glad I found your video! Thanks for the tips!!
You are so welcome. If you run into a snag let me know.
I tryed spraying some metal medals in the same way you did just here but after hours/ days of drying when I touch them they are sticky ? Any advice ?
Really? What spray are you using? There are several things that delay drying. Wet weather. Cold. Humidity. Drying needs near perfect conditions. Other than that it can take time. You can (if it stays sticky) clear coat it. Use a spray clear like Rustoleum 2x clear.
I’m really curious what type of paint you used. Let me know what happens.
@@JunkinwithStacy I’m using a metallic Silver paint and I had perfect dry Southern California weather
What brand is it?
@@JunkinwithStacy ace
I’ve not used their metallics before. I wonder if others are struggling with their paint.
Thanks for the tutorial! Out of curiosity, do you have any experience with painting nickel-plated zinc? I’m currently trying to use Testor’s enamels to paint some replica keys made of nickel-plated zinc, but I’m not sure what would be the best primer for the job. What would you recommend?
Hi Fred if the plating is coming off in any way you want to scrub it away. It will continue to flake if you don’t. The 2X paint has a build in primer that is really good for most applications. Otherwise a self etching primer for surfaces that need more endurance. What is it that you’re painting?
@@JunkinwithStacy It’s a set of fancy-looking metal keys, each about 4” long; they’re pretty new, though. The plating isn’t flaking at all, just got scratched in a couple tiny places. So you say self-etching primer would work on both nickel and zinc? Also, would Testor’s enamel paints adhere well to that primer?
Thanks for your help!
If they’re purely decorative (as in being hung on a wall and not handled) it would probably be fine without the primer. The Testor’s enamel will work over the self etching primer. It should work on nickel and zinc.
@@JunkinwithStacy Okay, excellent! Thank you so much, you’ve been a major help! 😁
Thanks for the video! What grit of sandpaper would be best to use?
120 should do the trick. You just want to scuff the surface not create grooves. Have fun painting!
Thanks!
You are welcome.
Hi Stacey! So, 2-3 coats are fine ... I was looking for teansparent acrylic spray on metal but I think this is a good example of what a good coating is.
2-3 coats is more than enough. If you’re clear coating on metal to seal it 2 coats would probably be fine.
@@JunkinwithStacy I did 5 😆😆😆..I'm an anxious extremist lol. Have you tried the Epoxy Spray ? I think it can be more resistant than acrylic, specially for metal pieces, copper jewelry etc
😆🙌🏻 you did what it takes to get it done! I haven’t tried the epoxy spray but I want to. Now that I can spray outside again I think I will!
Thanks!🫶🏽
You’re so welcome!
Love your laugh! ❤️
Thank you! I haven’t heard your but I bet it pretty great too. 😉
@@JunkinwithStacy I've been told... 😉 Thank you for the excellent video!
You are so welcome!
Yes
Yep
I’m thinking about buying a can of this but in dark brown. I have a strip of my lanie aluminum I want to paint becaues I got house paint all on it and could not get it
Off. So decided just to paint it up
Not that I want to discourage painting but did you try Goof Off to remove it? It usually take care of latex paint.
What grit of sandpaper did you use?
When you’re sanding for paint to stick to a surface you just need to make light scratches over the surface. So a 120 grit is fine. You could use a 220 grit. Just stay away from the lower grits because the goal isn’t to take the original surface off.
Great job!!! I have a question. I'm trying to do the same to a metal desk....but I'm not sure if it's metal! How do I know? The table feels like metal but is super light even though it's a tall two tier table. What type of paint should I use? Right now it's a rustic mud green and I want it mat white. Help me please!!! :))
If you can’t be sure you should use a primer like kill adhesion. It sticks to slippery surfaces so you paint won’t come off. On Friday I will post and adhesion tutorial so you can see how it works.
Use a magnet. If it sticks it's metal.
I purchased a pair of cute lamps. White shades but the bases are black. Got them for my granddaughter and I want to paint them silver or chrome. Is it necessary to add a finish coat over the paint when done? Thanks for sharing.
When I use the rust oleum chrome I do not clear coat it. I believe most spray paints will have the protectant build in. It should say on the back of the can of you need to clear it. I will say that a lamp isn’t going to be handled too much like a drawer pull or knob, so I wouldn’t worry too much. It should be amazing! 🤗
Thank you so much for your help and quick response Stacy. I will be getting some chrome paint today. 😁
Hey Stacey great vid .! I was just wondering, I have an spare fridge sitting in the shed I would like to to repaint do you think the rustoleum 2x will do the trick ..! Thanks John
Yep I know it would because that how I painted my beer fridge. 😂 don’t tell anyone!
@@JunkinwithStacy Same here 😂😂😂😂😂 but thank you for your reply it's much appreciated...! John
You’re welcome!
I have a question. I’m currently up cycling a metal table. I’ve purchased metallic paint for the color. Should I use a black base coat/ primer for it to have a better shine/ color finish? I’m thinking about whenever I do a mirrored finish. I always go over the mirror effects with black before I finish and it looks better than just using the mirror effects alone.
With products like color shifting and mirror than yeah definitely. If you’re using the chrome spray paint it’s not necessary. What product are you thinking of using?
Now I have a metal frame do I need to clean the item with anything before sanding and spray ?
You can sand it first and then wipe it down with a damp cloth to remove the dust. Unless you think there grease or anything really dirty on it. Dawn dishwashing liquid can tackle it if you believe it’s greasy.
I found 2 cheap wall sconces with glass globes at a thrift shop. I’m not sure what they are made out of. It’s not metal. My husband said maybe chrome. I ordered some antique gold spray paint on Amazon. My spray paint WILL NOT stick to them. It immediately starts running. We sprayed them first with a metal primer. Primer did wonderful. We do very light sprays and it just starts running. Any suggestions?
Well not knowing exactly what you’re working with makes it hard to answer this question. If you have chrome or a chrome coated resin then you’ll need to sand it really good so the paint has something to bite into. Like sand it until the surface is dull. I’m surprised it’s not sticking to the primer. I’m so curious about these.
@@JunkinwithStacy We didn’t sand any part of it. Primer stuck to it like glue. We used a spray paint I had never heard of before from Amazon. As soon as my husband starting spraying it, it started running. We are going to sand today & try again. Wish us luck!
I do wish you luck. I’m so interested in what’s going on. Will you share the type of spray paint and let me know what happens?
Is this the same spray can you used on your ceramic angel and owl?
Yep probably the same can too. For sure the same brand.
What grain of sand paper do you use
I think I used 120. You’re just trying to give the paint something to hold onto. You don’t need to be too aggressive with it.
❤️❤️❤️❤️❤️
Hi mam where are you from
Minnesota