We Built The Worlds Smallest Snow Bike!
HTML-код
- Опубликовано: 9 фев 2025
- www.inflcr.co/... Click the link above to try out Cove for 50% off + Free indoor Camera
Thanks, Cove, for Sponsoring! We built the worlds smallest snow bike! We started with a $300 pocket bike dirt bike from Amazon and then engine swapped it with a KTM 50cc 2 Stroke Knock Off from eBay. Now we are taking a snow blower track and an old snow mobile ski to make the worlds smallest snow bike! Bike and parts used in this video www.grindhardplumbingco.com/builds-1/2021/1/1/pocket-dirt-bike
Our GHPC Merch + Sur Ron Giveaway www.grindhardp...
Fan contact info
PO Box 2370
Sandpoint, ID 83864
USA
grindhardyewww[AT]gmail.com
Music from Epidemic Sounds (A site with thousands of Royalty Free Tracks For RUclips Videos) share.epidemics...
The moment Grind Hard gets a waterjet or plasma table, it’s game over for all other garage fab channels!
its already over lmao 1m subs and counting
i hope they get one
Cars n cameras is pretty swagger though
True
@@Goldrecordsgeorgeclooney yeah ike is good but these guys are great
Life is very simple, I see a new Grind Hard Plumbing vid and I instantly click like and enjoy another kick ass video!!
Love the vids and yes I mean both channels
@ostacruiser Yeah they do some crazy crap 😂
@@LSM_OPTiX Stick with it. Things get better. We had very difficult obstacles to overcome in the past and no doubt again in the future. Everyone does. Just keep pushing forward ❤❤
@@LSM_OPTiX chuckles in understanding.
Yes sir
Be the coolest thing ever to see some kid that's really great for his age on a regular dirt bike rip this in the snow, because I know as a kid I would have loved a mini sized thing normally for adults only
Would be a lot faster with a kid on it too.
Agreed they need a test subject lol
Hell yeah dude🤘🤙🏍😎
12:21
> Stops it
> "It's unstoppable!"
LOL. Tiny snowbikes are still badass.
Bought this for my small back deck in the Eastern Sierra. ruclips.net/user/postUgkxoHYZbq5g9fkcAtinlTqstNlje-UQkCHN We get A LOT of HEAVY snow so I was a bit skeptical but it was worth it! After the first storm of the year this has exceeded expectations! It throws snow very well, even 10-12” + that said the more it piles up the harder it is to maneuver the machine. It is exceptionally light weight and overall exactly what I was looking for. If you have a large amount of snow and a lot of area to clear, you may consider something with a drive engine to help maneuverability, but for decks, second stories, roofs etc, you can’t beat the light weight to great snow throwing ratio. Side note, the chute rotator is a bit flimsy and it initially didn’t seem to work, after a few uses it seems to have loosened up.
Imagine if you guys started manufacturing and sell those as a start and go kit, kids parents would be scooping them up everywhere. A 100lb kid on that would fly.
no they won't everyone is afraid of getting their kids hurt nowadays, they will sell just not enough to be worth it
@@ronhartle8289 negative thinking gets you to negative places
If you remove every other tread on the track it should get more traction . Cool build
The lugs look strong enough they could bolt or rivet on some extra rubber to make it a deaper tread
@@joemama8654 no there would be too much resistance. It would make sense to cut the paddles in a _
_
_
Type Rythm as it will not only make the treads grip harder to the ground, but it will increase the speed of which the track turns as it removes weight and resistance to the ground, but gives you speed and traction in the snow.
Probably good idea
Or just stud the hell out the tracks
It's not a traction issue it's a torque issue plus the motor topping out too soon
As a machinist and certified welder, I'm really impressed with your fabrication skills!! Unlike some channels who are extremely crude with their fabrication and machining; you guys are much more professional and I really enjoy watching you guys!!!
dang you! i was trying to look something up. seen this video and had to open it. now i forgot what i was going to open!
🤣🤣🤣
Life struggles lmao
How to fit 16 turbos on a dual engine mustang?
We are king of distraction! Haha
@Boosted Lifestyle I have exactly the same issue as you 😂 every time I need to find something important I get distracted by other videos, one example is your octaturbo Mustang 😂
This is great work! And when summertime comes around you can try hydoplaning across ponds!
How fast do you think that thing is??😂
Yes just yes please!!!
@@gh0stedone472 instant endo
@@gh0stedone472 😂 So you're saying they need a bigger engine?
@@cjzx325 maybe a 125 😁
Give a kid that’s 40 pounds it and see how fast it can go
Too
Fast
We will for sure!
I'm 80 sow🤔
@@onnikallioniemi mopo
Things awesome imagine how much fun it would be on a kx65 or ktm65 with 6 gears and a clutch lol 🤣
Insanly fast 😂
Those only have 4 or 5 gears
Usually big bike like 250 and 450 4t and 125 and 250 2t
@@jsfilms7876 had a kx 65 back in 2010 and i remember it had 6 gears lol
65 Still small
Leave to GHP to put together the smallest Snow Bike and have it perform flawlessly right out of the gate.
SERIOUSLY SICK
Instead of Timber Sled, it’s a Sapling Sled
I literally looked to see if you posted this this morning
Now it needs a proper 2 stroke dirt bike engine. YZ80 or something like that
Dream big man, 125cc at least
750cc zabel sounds better to me
This is a proper dirt bike engine. It's a ktm sx50 engine
Rotax gocart engine 125cc auto clutch
Really need another engine upgrade now, per say a 65 2smoker
I was just about to comment this! or even 85cc but it might be too big for the frame
Turbo.
Hell yeah 💪🏻💪🏻
That’s what I was thinking the entire time, a 65 with gears would be crazy
CR 80 ! And then let a kid(capable) ride it
GHPC Is the gift that keeps giving.
Absolute Madmen. Love the mini Snow bike.
3:25 this is gonna be epic
You found our secret!
Y beat me to it
Omg I was thinking this when I saw the motor swap in the bike and then I see this. My day is complete ❤
You snitched yourself off I saw the Colonel in the background with a full set of tracks on it!
Stupid idea.
@@farmmouse3011 how my good sir??
@@itsteeskey stupid tracks just rob power thru too much friction, and put undue stress on parts like diffs
Looks like a great way to break a lot of shi$
@@farmmouse3011 well companies sell tracks for side by sides and that’s what the engine is out of🤷♂️ it’s a 1000cc prolly pushin close too 200hp so I don’t think it’s gonna really rob any power maybe 20hp
Hey grind hard. And I'd like to see next. A light bar just below the hand grips on the world's smallest snow bike. Studs on the tracks which you can do with a hot nail and a pair of pliers.
4:35
“Looks like the real deal”
“Yeah, it is; this is a real plasma cutter”
😂
Always a pleasure! I am always looking forward to each video.
imagine taking a walk outside and seeing a grown man riding a tiny dirtbike
You would hear that way before you seen anyone lmao
Story of my neighbors life. A few buddies and my wife and I all bought honda 50s awhile back and routinely race my property.
Genius idea fellas . Keep going strong on the builds. You guys rock!
The only channel I can hit like before I even hit play on the video.
Same
Super cool guys! and thank you for actually putting in a good bit of riding footage :)
Full Team at Work👍
By the way, very fresh music choices
The coolest thing about these guys imo is how they always use 2 strokes in their builds; They know what's up!
You should take send Dee and the Corvette and race them in the snow
Great video guys, I can’t wait to see the Colonel with those tracks tearing up some snow!
Dude watching you run that mil while wearing that hoodie with the strings hanging there makes me so nervous for you.
I can't believe ghpc has blown up so much, it's awesome! I remember when the channel had less than 100k!
9:40 "Happy medium" Good luck with that. The two components the need to be tightened both tighten in opposite directions and wear in opposite directions, so as the system wears you're going to have to hope that you can fudge the adjustment until it's worn enough to remove a link. I predict that you'll need to modify in an adjuster to the rear idler.
You're thinking WAY too far ahead.
@@peterjames808 naw just far enough ahead🤣🤣
You guys just made my toilet time so much better
Same
Who else would buy one of these🙋♂️
Shit if I was alot smaller I would lmao
The rear track came out sick looking on that little Beast lol and the snow looks beautiful in those woods
Молодец 👍 !!!
Пацаны вообще ребята
Love to see the boys from Idaho doing cool stuff 208 gang
Whoa, isn't it a Colonel Sender on four friggin' tracks?! NGL, I'm highly impressed and eager to see that thing rippin! Keep it up guys, great content as always since barbie cart build! Cheers from Russia!
while you "only" build fun toys to mess around, I just want to point out that very few people on this earth have Ethan's level of fabrication ingeniosity and skills. Keep it up man
She may not be fast, but she sure is a looker!
Snow pitbike love it. Nice work too
Bro’s! If you set my 10 year old. Out in that he would have the time of his life!! God work as always......... in the End of course love ❤️ love you guys
Are you near North Idaho? Hit us up on instagram if you are serious!
Hands down the best garage builders in the world love your work boys even the quality and style of the build is amazing keep it up
More stalling to avoid the 2JZ Mower ☠️☠️
That bike for a kid would make his day
I made a ski to replace front wheels on bicycles and found the steering works best if the tail of the ski ends where the wheel would otherwise hit the ground. In other words, chop the ski off under the forks for the best handling. I could touch my handlebars to the snow making turns with my wheelski prototype. It also rotated to about 20 degrees in the front to follow the moguls and floated freely between flat and full incline. Frank Wadleton was making the final version but he ended up closing down and my wheelski never got produced.
You should try it. The bike will handle amazing if you shorten the ski
Been here since 25K! Great to see you guys grow!
These guys are 100% living the American dream, you guys rock!
I love that my two favourite builder channels (grind hard and Colin Furze) operate out of hack shacks and not massive beautiful shiney workshops.
I officially dub this bike, Cave Yeti.
Snow Yeti 👍
Yeah I gave that one some thought and said to myself. Snow Yetis a bit boring. But yeah yours makes more sense.
@@Jarmezrocks not as menacing tho.
Could you guys maybe take an old vintage snowmobile and add modern front and rear suspension while keeping the old (mostly) vintage look??
Ya boys, nice
That is a very cool snow bike, I think you guys start a new toy , take care and have fun.
Definitely found a new item here to add to the dream build list… I bet it’s a blast to rip around on!
That’s sick! Maybe throw some 10” Bmx bike bars on it? Might make standing more comfy! Keep up the awesome builds!
You guys need to make these for kids you will kill it! Another amazing video guys keep them coming and never stop!!!!!!!!
I cannot believe that clutch is actually holding together. That is pure hell on that thing!😂 Awesome! Keep up the good work!
Should done both tracks from the snowblower ... more traction and more stable but biggger motor to spin them sooo I guess that wouldn’t make it the smallest lol
My kids would be all over this! Great video! 🤟
It so cool
Man u guys r the BEST 💪🏽💪🏽💪🏽💪🏽💪🏽 Can't wait to see what's next
Oh and you should probably extend the rear fender. I suggest making a runner-up from the new swing arm you made for the track. Also using a flat piece of sheet metal as a mounting bracket.
snowbike ALL the things!! YEWWW!
You guys are the balls, love the builds.
Hello from Scotland! I'm a big fan of all your guys work but gotta say I'm loving this 🤣 awesome job guys keep it up 🤙🤙
Love this thing! That looks so fun
What about studding the track and putting an ice blade on the front? and taking it on a frozen lake.
So rad i love the mini snow bike!! I bet some taller bars would make some more knee room!
You guys are the best at making this style of content.
I think the little clutch mechanism is slipping. You guys definitely made a cool toy. Keep it rocking
Awesome video, I know you’re going for the smallest bike but I would honestly think of extending the seat a bit so it’s comfortable to sit on.
Yooooooo tracks on the colonel! Stoked.
That's awesome! Need to take it up in the deep snow and see how it does after you rebuild the frame! Lol
And you get the exhaust up the back of the jacket to keep warm! Perfect 😂
Grind hard plumbing u guys should put snow tracks on the front of a snowmobile with some sort of a transfer case and make three tracks driven
looks like you have a true production design there
Which one of you is pumpin out them Beats? DAMN! I love the Engineering but I came for the beats!!!!
Wishing there was more snow in my area for a snow bike!
You guy's rule!!!!!👍👍👍
Sounds like you are cutting down trees. Not shredding snow. Awesomeness
Little ripper😍😍😍you guys are amazing.
I wanna see more of inside whatever house you was in when making that add...looks awesome
That nickname absolutely needs to stick. It’s perfect. It’s like a compliment and an insult all in one. So funny. And I don’t mean like a real bad insult. I mean a funny between friends insult. It can be ether lol.
The worlds smallest snow quad would be epic
You should take senddee and Corvette and the colonel to race in the snow
Wow that surprisingly worked well! Im impressed
Now you guys need to go full tracks on colonel senders. All wheel drive tank with 100 hp!!
ALL the revs and goes 1 mph =D love it!
I appreciate you guys doing quality fab work and designing your own stuff.many channels have tried but none compare
Another great build guy's,looks like alot of fun.
This is amazing guys! Keep up the good work!
These one vid formats are great for impatient viewers like myself.
THATS SICK AS HELL MAN!!!
Awesome video guys Keep them coming!!!
You should make a six wheel mini raptor with a mini goose neck trailer to pull everything. It would look sick
These guys are genius! Awesome job
Nothing to do now but find the biggest dude possible who can still ride it
I'm now contemplating put a track on the back of my 200cc Coleman trail bike hahaha