LEXIVON LX-770 Butane Soldering Iron UPDATE! Long Term Review, Do I Still Like it?
HTML-код
- Опубликовано: 29 сен 2021
- The short answer is yes, I love it. This LEXIVON Butane Soldering Iron is Awesome! I have done some ridiculous things with this device and it handles my ask every time. I know my beloved Weller soldering station could not do what this LEXIVON kit did in the video here: • LEXIVON LX-770 Butane ... . But it's an apples to oranges comparison, so keep that in mind please....!
LEXIVON (LX-770) Butane Soldering Iron -- amzn.to/3wZncWt
Weller (WE1010NA) Digital Soldering Station -- amzn.to/3iOWOWW
LEXIVON Genuine Butane Torch Soldering Iron Tips -- amzn.to/3iQJeT1
Give a 👍 and subscribe 🔔 if you'd like to see more of these video reviews and thanks for watching 😃!
The short answer is yes, I love it. This LEXIVON Butane Soldering Iron is Awesome! I have done some ridiculous things with this device and it handles my ask every time. I know my beloved Weller soldering station could not do what this LEXIVON kit did in the video here: ruclips.net/video/nQfm6NS1NBI/видео.html. But it's an apples to oranges comparison, so keep that in mind please....!
LEXIVON (LX-770) Butane Soldering Iron -- amzn.to/3wZncWt
Weller (WE1010NA) Digital Soldering Station -- amzn.to/3iOWOWW
LEXIVON Genuine Butane Torch Soldering Iron Tips -- amzn.to/3iQJeT1
Give a 👍 and subscribe 🔔 if you'd like to see more of these video reviews and thanks for watching 😃!
This kit is awesome! I'm using it not very often but when I do - it is very convenient.
I just Ordered this Lexivon Butane Soldering kit im glad I watched this video and your first video. I watched these after the order.
I'm sure you will have no regrets, this is an awesome kit! Cheers 🍻
Same here. Just bought it from Amazon
I bought this kit after seeing your review and love it, after my first job somehow the catalyst adapter you put the tips in was damaged (the metal gauze inside came out burnt and bent) , so i e-mailed Lexivon support and they were brilliant, got the new part in 3 days, no cost I am UK, but it does everything you want.
It sucks that you've had an issue with yours, but it's good you can confirm their support is top notch. Cheers 🍻
Thanks for the review, I love mine! Lexivon calls for refined butane not because of clogging, but because contaminants can ruin the catalytic element which superheats the flame. (butane has a cool flame compared to other gasses) I don't know if Zippo/Ronson fuel is good or not, but it probably is. The only way you can tell the catalytic element is being contaminated by dirty fuel is the tip temperature will gradually drop until it almost won't melt solder. The good news is, the element is separate and cheap, unlike the Weller gas soldering iron. Kudos to Lexivon for selling affordable spare parts!
I just used mine for the first time and I’m fairly new to soldering, or rather returning after a very long absence. So far I’m loving it.
I used the hot air blower so you can imagine it got pretty hot.
I think a lot of people with experience don’t even have to think about how long to let it cool off but for us new folks it can be a little nerve racking.
Something I struck upon a short while ago was using the “no touch” thermometers that inundated the market in the last couple of years. Most seem to have a “world” mode where you can measure things like pan heat etc.
I’ve started to use that to be certain of the temperature of these sorts of tools before touching them.
I wanted to pass it on in case others find it useful.
I agree I love this butane solder iron. The best. I dont use my electric one anymore. It does everything for me..
I still have not used my Weller soldering station since I bought this thing. But I did think about it just the other day when I was soldering a dimmer to a new LED lighting system. That video is coming soon cause these lights are incredible!
Cheers 🍻.
Thanks for the review. Newbie here...I just received mine. How much butane do you add upon filling for the first time?
No problem, it's just like filling a butane lighter. It's completely full when it begins to blow back out of the fill port. You'll see it, it'll take the butane until all of a sudden it begins to leak/blow back on you. You don't have to fill it that full, but the point is that tank will only hold just so much and when it's completely full, you'll know it. The tank will simply bleed off what it cannot hold at which point it is at it's maximum full capacity.
Cheers 🍻.
First thing I did was cut the foam in order to not have to take the tip off whenever I'm done soldering.
I thought of doing the same..... I'm just concerned about the whole tip system sticking together if/when I ever want to change a tip. That has been my only issue/complaint about this kit. A little grease on the threads seems to have solved that problem for me, but if it lived with one tip for long periods of time, it might become very difficult to separate. Have you experienced any problems in this regard?
@@Now-Review-This Well I just bought it last week so I can't say but you seem to have figured out a solution and I'll probably grab some high heat grease myself and put some on with a q-tip. Other than when I'm welding plastic during a repair the pointy soldering tip is what I use 99% of the time and on the rare occasion I solder plastic I have another one I use for plastic anyway.
@@dosdont:
Me too, mostly soldering. The only other thought I had was using some JB weld to lock the aluminum tip base to the plastic portion of the body, just anything really that could lock up those threads at that point should solve the problem forever. A little grease on the knurled nut threads has worked great for me, so far. But a little epoxy on that lower section would solve the problem permanently. Keep me updated please, I'd really like to know if you have any issues and too how you solved them.
Cheers 🍻
@@Now-Review-This 👍🏻
How long does it last until you need to refill with butane?
I don't know, I've never timed it. But it would be much less time on high than on low. I've done several projects with it between refills. One full tank lasts a good long time.
If you ain't squinting down through a pretty powerful microscope at the thing you're trying to solder, any old farty iron will probably do the job reasonably. .
However, when you are squinting down a pretty powerful microscope just to see the thing you are going to solder, then most "soldering irons" are going to look like telephone poles. The ones who discover which irons work in those scenarios aren't keen to share because thats their livelihood.
Take a look at this: .
That full-stop ^.
That's the pad that's burnt & you now have to reflow it.
However - just for the giggles - the actual real-life configuration is this: .........................
Pad 7 & 8 are burnt up. Reflow/solder pad 7 & 8 using your iron. It's going to look like a telephone pole under the magnification you will need & that roll of 1mm or 0.8mm solder will look like an oil tanker trying to cram itself up the local stream. Technology moved on & smallered. Very few irons kept up. 0.25mm solder will be huge & a test in this common scenario.
That's the reality.
Does the solder the kit come with contain lead? I want to make some jewlery charms with this kit
I have no idea, there is no label on the container. But I would not take any chances, just use something that you already know is safe. I would just get some good silver bearing solder and call it a day.
Any ideal what type of solder this kit comes with? I have this iron but not to sure about the solder.
I don't know, but it's not very good. The very first time I used this for a job was on a tractor repair. Here's the link if you care to see, it's in video 3 somewhere:
ruclips.net/video/1c3i6OTksvs/видео.html
I remember not being able to melt the stuff without flux. I only use silver bearing solder for my projects, the stuff that comes with this kit is definitely not that! I threw it away after that tractor video was complete. I still totally love this kit though, even with garbage solder. Cheers 🍻
@@Now-Review-This Thank you
does it stay working for years? the bernzomatic st550k one that is similar crapped out after a handful of uses, it stopped igniting, even if i lit it w/ a lighter, it stopped staying lit, it was a waste
Mine still works like new, and it's going on 4 yrs old now. I don't use it every day or anywhere near that, so I cannot speak to those conditions. But a few times a month is about how I've been using mine, and some large projects in between with more frequent use. But it's still my goto for all of my soldering needs, and I still love this thing! One latch has broken on the plastic case now, the other latch feels like it's not far behind. But otherwise it's all still working like new.
Cheers 🍻
Do you have any problems with using that butane? It is not refined like they say in the instructions
As I said in the video, it's been working just fine all this time.
@@Now-Review-This I'm actually using a cheaper butane.. $6 for 5x8oz from Korea. It works great so far, fires up every time.
@@driftx2:
I didn't even know there was such a thing as 4x or more purified butane, until I read the manual for this iron. The Ronson butane is all I've ever used in everything that can burn it, I've never had any issues, yet.
Cheers 🍻.
@@Now-Review-This I think Ronson butane is already at least 3x refined. Walmart has an awesome deal on Ronson that I couldn't find anywhere else locally or online.
@@dreita27:
I was unaware there were different levels of purified butane, until I bought this soldering iron. Going on 2 years now the Ronson stuff has been working great so far. I really like this kit.
Any brand of butane you recommend?
Any brand that's on sale. I'm using Ronson with no problems to report.
Would it be safe for small components on small PCBs? I like to build small gadgets and circuits..
I would say not. Sure, you could solder some components no problem, but the exhaust jet on the tip @1:45 will inevitably end up melting some nearby piece or part. A traditional electric iron or soldering station I think would be much better suited for PCB work.
Cheers 🍻.
@@Now-Review-This I should've known that. Trying to upgrade from my cheap Harbor Freight 30w iron. I'm a cheap submbtch. Hehe
Thanks
@@HappyHermitt:
Hahaha, me too most of the time.
Cheers 🍻.
✌🍺🇺🇸
sure it can't do a large ground plane
My 60w plug in $8 iron from amazon gets hotter i just side by sided them and the $8 one was much faster at a tinning the end of some 8g thhn. Dont get me wrong i prefer the butane one as most my soldering is done inside my car, but the torch is slower, its been riding around with me lighting cigarettes and earlier i used it to braze some 14g to washers. And it can do shrink tube just holding it up to the exhaust but the other one was hotter
If your $8 el-cheapo is even close to this Lexivon unit, you probably have a defective one. This thing kicks the crap out of my 70 watt Weller soldering station for brute power, no contest! This soldering station here: amzn.to/3PyqgAr
Cheers 🍻
@Now-Review-This i contacted them rhey tried to say the zippo fuel is worse then the neon they sell at the gas stations near me and to try different fuel. Mines been having an issue were i lock it and it like looses its lock and i asked them about it refrencing this vid they said to go get better fuel. I ended up having to use the cheaper one just to tin some 22g wires earlier because it kept like turning itself down when locked and going out.
@@Spacecadet3890 :
That does sound like a fuel problem aside from the locking issue. If yours still under warranty the locking situation will be covered. I use Ronson fuel and have not had any problems to date. This stuff here: amzn.to/3LyuHK8
I don't know if you've seen my first video on this soldering iron, but it has the power to solder 8 awg. Here's that video: ruclips.net/video/nQfm6NS1NBI/видео.html
@Now-Review-This i havnt i showed the warrenty dept your statement and they are sending a new one out, i heard you say you tested it with 8g so i tried, i took a peice of 8g thhn and tried to just to tin the end of it, my cheapo one got it hot enough the solder melted througb and coated everything, the one in the video got it hot enough to melt but it was just kinda smearing it on top and not flowing it down into the wire. But thanks your comment helped get them to replace it.
@Now-Review-This bought the zippo butane thinking its name brand and not just saying refined x many times to say it on the bottle hoping it would be the best. I gues neon is better.
For all that talk, no demonstration of soldering.
Was it just too much effort for you to click the video link I provided everywhere? Ya know, the one with the long and drawn out up close "demonstrations"!!!
cones are terrible tips
I found this to be almost completely useless without any kind of demonstration.
What part of 'click this link' was too confusing for you to see my initial review? What part of the literal title to this video was difficult for you to understand?