I’ve done a few bits of plastic welding. If your adding material make sure it’s the same as your welding. Nice tutorial. Powerful blower Bill. I saw the bushes in the background moving 😄
Nice fix. You did good having a thick enough tank to rob plastic from. It’s hard to find plastic that is compatible then won’t bond. Just sits on top. I’ve done this to lawn mower hoods also impregnating fine wire into the crack for strength. Well done. This is not hard to do while saving money. I don’t think twice about it for my own stuff.
You are on the money. I have seen a few suggestions about using outside material, but people don't consider that plastic isn't just plastic, and different sources will react differently to temperature changes
Thank my wife Roger, she is the one who seems to think I should be a hippy. I spent my entire career with my hair as short or shorter than it is today but she likes it long and she cuts(or doesn't) cut it LOL
@@lewiemcneely9143Thanks. I like it a lot better this way. I got it cut a while back but those videos are just coming out now. LOL I have a lot of videos saved up and some are long hair, some short, it should be funny to see if anyone notices.
I'll see what I can do. When I was outside running stuff with no cabs and no heat I'd let it grow and cut it off in the spring. I get Toots to just buzz it now, no guards on the clippers. I used to do it but the hands won't turn inside out any more and my head needs a lot of help.@@GuysPlayingWithTools
If it’s all ready broke you have nothing to lose and all to gain! Bill did a good job on technique so follow his lead. There are many other videos on this as well.
Cable ties are often not compatible material. It just sits on top with little or poor bond. Sometimes you get lucky. There are many forms of plastic or plastic like materials. If ties don’t work trim a piece off a five gallon bucket lid for filler. Not the same as tanks or ties yet may be a better alternative that bonds. Experiment with what ever you have till you get a good bond then go make the repair. Bill did well have a thick tank to work with.
I know Seal-all works from the inside but I never tried it on the outside of anything but I slept recently and not responsible for much of anything. We had a good frost last night that you could actually see so winter must be here. And you had an inch of space for fuel before fixing the crack which is plenty for an extended work period of 30 minutes and then break time for a rest and filling the inch up again. Don't freeze, Pal!
This trick checks all the boxes, faster, easier and cheaper. The only drawback is that you can still fill the tank all the way up and breaks don't come as often LOL 47 with a high of around 70 here is Dallas today, I love this time of year.
I was supposed to get a couple of 30 minute breaks every hour but nobody reads the fine print in job descriptions and this time IS sweet. We have the 4 different seasons and we favor fall-ish times too!@@GuysPlayingWithTools
Nice fix Bill! I like plastic welding :)
Thanks. I know, not super original, but original videos stopped happening years ago. 🙄🤣
Plastiwelding comes in very handy Bill especially on those obsolete parts. 👍
Hey I like that shirt, I think I know that lady. 🤣
The big question is, will she admit she knows you?
LoL, I would say probably not. 🤣
@Big_Johns Let people know, elections are next Tuesday so if you are in Mississippi, go vote for her. 👍
I hope you know that lady 😊
I’ve done a few bits of plastic welding. If your adding material make sure it’s the same as your welding.
Nice tutorial.
Powerful blower Bill. I saw the bushes in the background moving 😄
Nice fix. You did good having a thick enough tank to rob plastic from. It’s hard to find plastic that is compatible then won’t bond. Just sits on top. I’ve done this to lawn mower hoods also impregnating fine wire into the crack for strength. Well done. This is not hard to do while saving money. I don’t think twice about it for my own stuff.
You are on the money. I have seen a few suggestions about using outside material, but people don't consider that plastic isn't just plastic, and different sources will react differently to temperature changes
Happy haircut Bill. Your right about those gas tank prices. Some are way overpriced, if you can even get one.✌🇺🇸
Thank my wife Roger, she is the one who seems to think I should be a hippy. I spent my entire career with my hair as short or shorter than it is today but she likes it long and she cuts(or doesn't) cut it LOL
I try to look civilized but usually fail miserably. It's the head, but you're looking very respectable!@@GuysPlayingWithTools
@@lewiemcneely9143Thanks. I like it a lot better this way. I got it cut a while back but those videos are just coming out now. LOL
I have a lot of videos saved up and some are long hair, some short, it should be funny to see if anyone notices.
I'll see what I can do. When I was outside running stuff with no cabs and no heat I'd let it grow and cut it off in the spring. I get Toots to just buzz it now, no guards on the clippers. I used to do it but the hands won't turn inside out any more and my head needs a lot of help.@@GuysPlayingWithTools
Doing the line is just like doing a v groove in metal welding. It gives you more area to put in more fill material
You get it. 👍
@@GuysPlayingWithTools you got that right bill 💸💵🤑
Great looking t shirt 👕 Bill 😊 and awesome repair buddy
We all need to move to Mississippi just long enough to vote for her. 😁
If a new tank was available, the shipping cost alone would be outrageous. Good fix Bill.
Sometimes you can Amazon them pretty cheap, not this time though, I couldn't find a match anyplace.
Many thanks for the tip, good work.
Thanks. It you are patient, it's pretty easy.
I can remember doing this to model cars making roll bar gages so much fun 🤩
It is so easy it feels like cheating. 👍
Very nice bill enjoyed it
Thanks mate!
Good stuff!
If you follow the way I did it, it works every time. 🙂
@@GuysPlayingWithTools no doubt. I haven't had to do this yet but I'm sure I'll come across it one day. I got 2 of those poulans running good👍
@@franciscomolina5362 Cool. If you play with enough weed eaters and blowers, the day will come when this comes in really handy 🙂
awesome fix my friend
Thanks Dave. 👍
@@GuysPlayingWithTools your welcome my friend
Nice job and it saved money to. Superb
Thanks. This is a good fix when you can't find a tank
Are you going to be on the Saturday livestream anytime soon? Haven't seen you up there for a while .
I lost track of where it went when Conker stopped doing it. I do miss it. I have been pondering starting one myself. 🙂
Never tried this either and i have one that could use this surgery 😮👍🏾
I like to replace them but you can't, this works. 👍
If it’s all ready broke you have nothing to lose and all to gain! Bill did a good job on technique so follow his lead. There are many other videos on this as well.
@@johnanthony2545 Totally agree 💯👍🏾
Great job.You can use cable ties.
I suppose you could, for tanks that are too thin to steal material from, that would work well
Cable ties are often not compatible material. It just sits on top with little or poor bond. Sometimes you get lucky. There are many forms of plastic or plastic like materials. If ties don’t work trim a piece off a five gallon bucket lid for filler. Not the same as tanks or ties yet may be a better alternative that bonds. Experiment with what ever you have till you get a good bond then go make the repair. Bill did well have a thick tank to work with.
I know Seal-all works from the inside but I never tried it on the outside of anything but I slept recently and not responsible for much of anything. We had a good frost last night that you could actually see so winter must be here. And you had an inch of space for fuel before fixing the crack which is plenty for an extended work period of 30 minutes and then break time for a rest and filling the inch up again. Don't freeze, Pal!
This trick checks all the boxes, faster, easier and cheaper. The only drawback is that you can still fill the tank all the way up and breaks don't come as often LOL
47 with a high of around 70 here is Dallas today, I love this time of year.
I was supposed to get a couple of 30 minute breaks every hour but nobody reads the fine print in job descriptions and this time IS sweet. We have the 4 different seasons and we favor fall-ish times too!@@GuysPlayingWithTools
@@lewiemcneely9143 I am gonna use that, a couple 30 minute breaks every hour 🤣
I tried it a couple of times but the bosses always frowned on it BAD for some reason but I sure hope it works for you!@@GuysPlayingWithTools
Jb weld works for me for around 4 or 5 year when it's a hole rather than a crack
Yes, a hole is a different animal, this works best for cracks
We finally opened our T Shirt store - GPWT.myspreadshop.com/
The tank for my zero turn is 150. That's ridiculous for a plastic tank.
@@stevenmartin4632 No kidding. They probably have a total manufacturing cost of $15
just keeps fing with it
Guilty. With a gas tank, I tend to overthink things. 🙄🤣