HOW TO CREATE A 90 DEGREE INTERNAL EPDM CORNER DETAIL USING FLASHING TAPE
HTML-код
- Опубликовано: 10 сен 2024
- In this EPDM roofing video tutorial, you’ll learn how to correctly create a watertight internal corner with a smart finish.
Using the right tools, materials, and techniques, sheets of One Piece EPDM can be cut to size, positioned, and taped to create a watertight seal at an internal corner. With our video to help, you’ve got this EPDM flat roof detail covered!
Contact us with questions or to learn more about our EPDM roofing training: www.flexiproof...
Learn more about the FlexiProof EPDM flat roof system: www.flexiproof...
Tools required:
• Craft knife
• Tape measure
• Marker pen
• Metal ruler
• Scissors
• Scribe
• Paint brush
• Penny roller
• Silicone roller
Materials required:
• Spray Contact Adhesive
• 9 Inch Flashing Tape
• EPDM Primer
Things to be aware of:
• The prepared roof surface must be clean, dry, and free from dust and contaminants (bitumen, oil, etc).
• Always wait for FlexiProof Spray Contact Adhesive and FlexiProof EPDM Primer to become touch dry and still tacky before applying membranes and tapes. This avoids gas bubbles forming underneath the membrane and helps to create a smooth and smart finish every time.