Diagnosing a broken RX 570
HTML-код
- Опубликовано: 5 фев 2025
- Get your PCBs and Project Parts from PCBWay here: www.pcbway.com
Thanks for watching! Comments aswell as Likes/Dislikes are appreciated.
Patreon: / cmdrsoyo
Channel Link: / @cmdrsoyo
HWBot: hwbot.org/user...
====================================================================
Music Used in my videos includes Destiny OST, Stellaris OST as well as Satisfactory OST and tracks from the RUclips Audio Library
hello my rx 570 has issue when i turn on the pc keyboard light and mouse and pc keep restarting but my gpu led light blue normal and has heat look like power is okay i tryed another gpu and pc working fine but this gpu has problem pc keep restart and no start up cant see pc bios and black screen pc restart every seconds i tested the 8 gpu ping by buzzer all is make tune what this short?
"Don't touch" and you put your finger on it. It made me laugh. 😁
Start repairing the cards then :). I'd like to see how reballing chips and then soldering them down works out.
If you have the time to do it, you can swap in memory that's faster and or larger capacity than those Samsung 1GB chips, I've done that before on a GTX 760 with hynix 256 MB, I installed Micron 1GB chips from a 1070 and it worked just fine in heaven and furmark for hours, can't speak to if it would work on an AMD card, but I feel like it would at least tell you if the core is broken or just the memory based on the artifacts without a driver installed
you need a customized bios with the correct timing straps with that
@@CmdrSoyo I didn't for my 760, I just swapped the module and it didn't care, I guess it was just faster enough to not matter
Nice content. It would be nice to see how you repair these GPUs.
I need default bios for this card, please give it to me
I have a leadtek gtx 760 256 bit bus and it actually has 2x6 pin power connectors. It has this problem where once the card is on, the fans run at max speed with no display. The core warms up from the moment it turns on as well. I watched a lot of your videos to try and diagnose it and i can't seem to find the problem. If you can give me some tips, that'd be awesome
likely one of the VRMs not running
Ik heb een zelfde videokaart. Mogelijk is het een zotec. Mijn videokaart heeft een asus koelblok. Met een dremel de extra koelvinnen verwijderd zodat het niet meer buigt.
Do a vbios mod where you disable channels that are broken
Only works on nvidia 400-700 series
@@CmdrSoyo it also works with polaris, i've "bandaged" cards that way when the chips havent arrived yet
@@level8473 huh i never heard of that mod. i only know of the one that is public for old nvidia and the one that is private for new nvidia
@@CmdrSoyo There's a guide about it, using HxD editor
@@level8473 Could u please point me there? I have a 7870 that needs that.
is that 300-400 ohms on 3.3v normal?
Some cards have low 3.3V resistance. So it's most likely normal. What i would be concerned about if it read in the single or dual digit range
hello commandeer I HAVE SAPPHIRE PULSE RX 570 4gb and i cant install drivers and it says code 43 i tried many fix like atikmdag patcher, reheat for 10mins, flashing different bios, and DDU none of them works. the card is detected and it boots fine. AND I HAVE SPARE POWERCOLOR RX 570 WHICH IS BROKEN CAN I GET THAT CORE CHIP AND PUT IT IN THE SAPPHIRE IN CASE THE CORE CHIP IS THE FAULTY ONE?
mem swap videos would be cool
i got one of those i wanna try ... eventually. whenever im done procrastinating i guess haha
99% bad mem on channel A :)
.