Ubiquiti Loco M5 Setup
HTML-код
- Опубликовано: 25 авг 2024
- I'm setting up ubiquiti nanostation m5 for point to point Wifi or point to multi point Wifi.
This allows me to cover about 1 mile distance of sending the signal.
It's for outdoor and indoor use.
If you are using other nanostation model, the setup and process more or less the same.
Where can I buy the product ?
NSM2
- amzn.to/323eypZ
- amzn.to/3ikvNdx
locoM5
- amzn.to/3KV3uPa
NSM5
- amzn.to/3h3o80m
locoM2
- amzn.to/2GwzxsN
POE switch
- amzn.to/3tqa36D
- amzn.to/3ii0iB3
Reolink 4k camera + audio
- amzn.to/3ijvdwG
- amzn.to/3L4eH05
Mounting Kit
- amzn.to/3buYOPw
- amzn.to/3ijnhf5
- amzn.to/3i2DVhe
-----------------------------------------------------------------------------------------------
If this video is helpful or helped you, it will be nice to have a cup of coffee.
Appreciation support to UberGeeks via PayPal:
bit.ly/3badyS4
Subscribe to our channel for all our latest videos!
/ ubergeeksbiz
Follow us on Facebook:
/ ubergeekshawaii
Follow us on Instagram:
/ uber_geeks
As an Amazon Associate I earn from qualifying purchases.
As an eBay Partner Network I earn from qualifying purchases.
Legal Disclosure:
UberGeeks video(s) or information provided on this website does not, and is not intended to, constitute legal advice, constitute IT professional advise, information technology expert, or tech related material; instead, all information and content available on this are for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
UberGeeks shall not be held liable for any damages, losses, injuries, loss of data, or harm arising from the use of information or techniques presented in our video(s) or information provided on this website. By accessing and using our content, you agree to release us from any liability.
Participation in any activities or experiments presented in our video(s) is entirely voluntary. If you choose to replicate any actions or experiments, exercise caution, and prioritize your safety and the safety of your equipment.
Thank you for joining us on this IT journey. We hope you find our video(s) enjoyable. Remember, your participation in this channel is at your own discretion, and we encourage you to use the information responsibly and safely.
#ubiquiti #netgear #reolink
If every RUclipsr could do videos with detailed explanations like u bruh, most people won't need to be going to school. This is excellent, thanks so much UberGeeks .
Thanks alot i have really enjoyed the learning Sir.God bless you.I 24:32 ❤ would like to learn on how to setup a WiFi hotspot zone.
Best explanation I've seen. I set one of these up a couple of years ago and needed a refresher. Thanks!
This video was so excellent. Needed to deploy these bridges in a couple hours and watched this video at 5am. Perfect and thank you!
Very very excellent
This guy is awesome, internet connection for dummies, well done..
You gave the best instructions regarding setting up the Nanostation Loco M5. They were very detailed, easy to follow, and clear. Thank you Simone.
You are welcome. Glad the video helped.
Excellent video. Clear. Covers everything one needs to know. And we can HEAR you. So many try to do helpful videos but they do not tend to their voice and often we cannot hear what is being said. Your voice volume is GREAT.
This was the most helpful video that I have seen as it pertains to setting up a wireless bridge. I am not a computer expert, so having someone take the time to explain it thoroughly using Windows control panel was very helpful. Thank you so much for making this video.
Oh my God! This was so good explanation, you have covered all the steps in a very easy way!. Thank you so much!
Excellent presentation of the setup process. Easy to understand. Well done!
I've never seen a video like this. You're a hero 🥳🥳🥳🥳🥳
Really excellent explanation. I had my 2 x M5 Loco side by side like yours and the video made the whole thing very easy. Very many thanks!
You are welcome. Glad the video helped.
This presentation made every step clear to understand and the explanation tied everything together at the end. Thank you
شكرا لك من اليمن🇾🇪.
NOW this is a good video, well done !! I'll have to share this for people !!
Thanks much, I have installed nanostation m2 to connect POE CCTV, it works well. I guess m5 is faster, I will try m5 soon.
Thank you for getting to the point and not rambling, best video I have watched in some time!
Glad you enjoyed it!
best explanation on youtube. thanks!! the process is less frustrating this way. :)
Very helpful. Followed the steps and I had no issues. Thank you!
Thank you for the detailed instructions. Everything worked immediately during the first installation.
these are best instructions for setting up the Nanostation Loco M5. it was very detailed, easily explained and understood and . Thank you very much.
Glad it was helpful!
This was a fantastic "how-to". Thanks!
thank u so much for your explanation. everything is so clear and easyly to understand
The illustrations helped so so much
Very very clear and helpful
Thank you very much!
You are welcome. Glad the video helped.
Very well explained, but can we use access point's network directly to connect as wifi on mobile?
absolutely great video. The explanation was on my level. Thank you.
Glad it helped!
Thank you!
Great video, I think you forgot to check WDS (Transparent Bridge Mode)
Good presentation. Thank you.
what a great teacher. Thank you.
You're a great teacher. You teach with the beginner in mind. I am trying this out today.
My question: Does the radio has to be mounted above the building for a clear line of sight?
Great vid!
Thanks for the vid. Easy to follow
Прекрасное видео. Great tutorial. Thanks a million!
Very helpful video. Saved a lot of time and effort on my end.
Great to hear!
God damn GOOD teacher 👍✌️🙏 I subscribe immediately
You did an absolutely fantastic video. Subscribed. Thanks.
Awesome, clear and easy steps.
Thank you so much , amazing tutorial for amateurs like me. Do you know if there are any tutorials which explain how to set antennas/two bridges to get full signal ? Thanks a lot again !!
Why DHCP instead of static on the wireless network management?
Amazing explanation for Nano station M5 thanks you for your help me
Happy to help
Exelente!!!!
Loved your explanation. For whatever reason, my Building A station, does not show up when I scan for networks. I'll be honest that I did disconnect Building A point before I got to this point since my router and where my computer are at a different location. any suggestions?
Great video, thankyou! Helped me so much!
You are welcome. Glad the video helped.
lifesaver. very good video. thank you a lot
great video thanks awesome video. very easy to follow. cheers
I configured the A station but when I went to do the B, the "Hello" SSID doesn't show up on my list of addresses....? Tried redoing the whole A setup and it still isn't showing when I try the B. What am I doing wrong???
Very good job u did!
Can the A device/ Access point connect to a wireless network?
How would I connect a wireless access point to the station (B)?
sir this is a 150 mbps. megabits per scnd not Megabytes per scnd..correct me if im wrong..
interesting video. I wanted to ask you some questions because I didn't understand some things. I have to move my signal from house A to house B. do I connect the first antenna to my modem (house A) and set it to non-static without changing the IP? I would like to connect a modem router for wifi to house B. How should I configure it? Thank you.
I have 2 points Located 3Km apart. What recommended to use: Nanostation loco m2 or m5?
Between the 2 points there is an open line of sight.
Nice detailed explanation, that is very excellent, thank you so much for this great video
You're very welcome!
Thanks!
Thank you for the super thanks. I appreciate it
Just a question, if i want to connect some device directly to the AP, it going to work without have the other nano station as workstation?
How can I reset this? Cant log back in to set up the B Side
I just purchased this same setup but my home network is .0.1 and the nanostations are 1.20 / 21. I tried DHCP and static to 0.20 / 21 but it's working. Ubiquiti email support is non existing. any idea what else I can try? I can't change my ISP address.
I think better will be set static ip
Great video, thank you!
I am setting up the B side, but no SSID is showing up for my A side when I press "scan" even though the popup shows 3 other networks. I have my A side ca le connected to POE, not LAN, and B to POE and my computer.
What if I do not have a pc, how do I set it up?
Can you connect an AP into "B" m5?
awesome video. so a simple router on the "B" end will allow wireless service in the building correct? any router suggestions?
I did the A and B having issues
great videos. Do you have a setup video to do a bridge form A to B and then B to C and B to D? I am trying to share my ISP from my house to my office in another building across street and then have the office bridge to 2 other buildings in opposite directions. I could get the bridge from router in A to B working with a switch in B to connect the Station to along with my pc and NVR, but the bridge AP connected to this switch doesn't seem to work. So hoping you have something to show this... I'm guessing its a issue with IP's or using the same switch for the injection to B side AP's to C and D so that I have 1 Station and 2 AP radio on same switch.
Cannot do A to B, then B to C and B to D.
The B is a "station", which means B does not send out bandwidth.
A is "Access Point", which sends out bandwidth.
Meaning, the C and D configuration will be "station" and they are looking for A the "Access Point".
What you can do is.
A to B
From B, into unmanaged POE switch. Then have another B.1 connect to the same unmanaged POE switch.
Have B.1 send signal to C and to D.
Hello, how do I Set a internet speed
Nice video! at station (B) we can connect wirelessly?
Unfortunately not
Good
How can I make it supply Internet wireless without putting a router
So awesome…u rock
I'm a bit confused on one part of your diagram (on the piece of paper). On the B side the yellow wire from the Loco going into the POE port of the injector (hence it's getting the power). You have listed on your diagram a CAMERA POE with the blue wire. You have already used up the POE on the injector. I don't see how the POE Camera is getting power in this situation by plugging it into the LAN port? I assume you'll need second POE injector and you would plug another cable from LAN to LAN on both injectors and the POE Camera to the POE port?
Hi . After resetting my device wifi signal is not coming up. I'm not able to connect . It throws an error can't connect to network. Kindly help
So using the the A will only function as a router
Does the CAT cable coming from my ISP service modem supposed to be plugged into my LAN/WPS jack or Ethernet jack from my modem?
I have 2 - M2 locos setup in PTP / AP repeater mode. (One on the side of my patio connected to the router / ethernet and it's facing the one on my barn for wireless internet) It works great but, I'm not able to login to each individual nano station, to change the settings / update firmware while connected to the new Ubiquiti Wi-Fi. (Right now, I just connect to each via the ethernet cable). Is this possible to have it setup like that? I noticed none of the Ubiquiti server stuff, doesn't show the networks unfortunately.
I wish I could like it ten times 💯💯💯💯
Thank you
Hello I have a pair of loco m5 wireless bridge from my house to the shop, ever time I loose power I have to factory reset and reset up the parameters to get online again. Is there a better solution?
Hello, thank you for a very informative video. Top.
Hi, once we already point to B area. how strong is the internet signal at B area? 500 meter can?
Is there any magic needed if adding another set of these units to extend the bridge to another building...so two AP and two Stations linked together on the same network
Thanks for the video. Can the source for "station" unit be any in AP in my network? I have a outdoor AP which has a pretty good signal to shed. I want to have an ethernet connection with router>switch in the shed. If i buy only one nanostation unit and configure it as "Station" would this work?
Hi, I followed the set-up and still don't have internet on pc via Ethernet at point B
Can you setup the “building A” as AP Repeater instead of access point? I have wifi on my back porch, just need to shoot it over to my shop. This would eliminate the need for isp running a cable to my back porch into the nano. Im only shooting to shop about 50 yards away.
Good explainations UberGeeks....
150 Megabits or Megabytes ?
Is the setup same for the nanostation loco m2?
Regarding the IP source in your video, can that connection (LAN port) be sourced from a router connection?
Can I plug another access point to the end of the blue cable at the building B, the third access point to give the wireless internet inside building B, so the house device can connect to the third access point instead of another router ??
You can daisy chain these, they just need programmed as continuous bridges from House and one access point at the end of said bridge.
Simon, All is working will with my M5 setup. Thank you.
I do have a question. I have house "B" connected to a switch. The switch is connected to a WiFi extender that is setup as an access point. My computer is connected by an ethernet cable to the switch.
I want to access my computer remotely from another location. I will need to set up port forwarding to the router. I will need port 50001 and port 50002. Will having the M5 between the router and the computer be an issue?
I also need to set the IP Address of my Server to static so it will not change if the computer is restarted. Will this be an issue?
Do you have any recommendations for any free DNS service?
I know I am asking a lot of you but, you helped me set up the M5's so easy and you are light years smarter than I.
If I replace the station b with a new one, (old one got wet) do I need to reconfigure from the start? Or will I be able to log into the station program and select the acces point name? It was set up by another party. Thanks!
Can I work with just one AP?
Nice job.
I was told I needed a new nano and I’m having issues setting up the new with the old. Any advice?
Nice explanation
Thanks and welcome
U R GREAT
I've spent many hours studing ip address setup, I wish I'd seen this 1st. It skips straight to what I need in a logical direction.
I fixed it! Apparently when I set up the station I forgot to accept the changes. The access point and the station had the same name. Easy mistake I guess...
Lol... it happened to me too. Glad it worked out for you !
Just a note that it should’ve been Megabits
How can i see a password with lan cable in a router box
Question I did same sett up and it is not working . I have it connected to a switch and I have checked for internet connection and there is but when I connect the nano it’s not working
You are not getting internet in building B ?