T-Motor F10 1104 Initial Review, Thrust Test of 8300kv vs 7500kv vs 4000kv
HTML-код
- Опубликовано: 15 окт 2024
- I've recently received T-Motor F10 1104 8300kv, 7500kv and 4000kv motors and wanted to share my initial impressions and test of them.
Please let me know what do you think?
▼ Follow / contact me
@Web: flexrc.com
@Facebook Page: / flexrccopters
@Facebook Group: / flexrc
@Instagram: / flexrc
@FPV Chat: flexrc
@rcgroups: www.rcgroups.c...
Flown these a few months back in the 8000kv version and mine were awesome on 3s.
Used 2345 emax props which I say are the most powerful and durable props under 2.5in.
Motors were very smooth and quality made with arc magnets and just felt quality all around.
Since you asked:) I would be more apt to choose the lightest, highest Kv motor for a 2” prop application.
Thank you for the content!
I'd be really curious to see that 4000kv swing a bigger prop on 2s. I'm wondering if it could swing a 4" prop without overheating and give decent thrust? 60's is awful low, but get that up to 90-100, and then it is flyable on 2s.
Fantastic test, Dmitry. Really nice to have this information when planning a build. I'd think the 8300kv would be great for a 2s build, and the 7500 for a 3s
thanks
Just ordered some 7500 kv Can't wait to test them...
Looking good! Maybe I'll throw a set of these on a 3" Ascent build one day... or maybe the new frame you're working on!
thanks Noah!
4000KV with 3s and 3 inch props has the greatest Watts to thrust ratio
Dude. I watched your vid's Then I bought some T motor F10's 7500 So amazing!!! Turned my Gofly cp 90 into a rocket...I bet it goes 70 mph hitting it with Tattu 2s and 3s 450.....I also run T-Motor F 40 pro's on my 5 inch....Thank you so much for these tech test's F-10 is my friend.
Which prop size are you using?
@@PowerThumb At first I was running Gemfan 2040 3 blade Hulkies, Then I turned the quad into a 115 and now run 2540 Gemfan flash props. Still one of my best builds. It has the runcam nano. Love this cam, I do need to build another 90mm, I miss that crazy noise. He he.. p.s. Have to tell ya, I actually fixed one of these T-motor F10's. About a year ago I crashed and snapped an arm. It yanked the wires hard at the base. Severed one way up under the can. Had to do a super intricate repair. So glad I was able to fix it. 100's of flights after repair with no problems. Think the bearings are starting to go. But I use a little tri-flow on all my quads to keep them running longer.
0:47 Use ShoeGoo using 50/50 SG/Toluene solvent or thinner to stick to alcohol cleaned heat shrink and alum painted on carefully to not run and add weight, let it sit 24 hours to cure, and then quickly use thicker coat to fill in gaps and glue wire harness to center hub which this motor needs for better crash protection if you break an arm. But looks nice and I'd pick the 7500 I think for light 3S 60C battery. Thanks...
Awesome comment...I damaged one of my F-10 motor's...uggh But I fixed it. Super tricky soldering repair. Then I carefully epoxied the wire trunk..So stoked I fixed it. They are very fragile where the wires enter motor.
I'd like to see the RCX RS1103 motor tested, RCX thrust tests are usually pretty accurate, and it shows performance that might? be exceeding the 8500kv on 2 and 3s. It's listed as N52 and probably t-motor doesn't tell you what magnets they are using.
I don't have their motors but if I will ever get them then I will definitely test them.
Flex RC ok thanks. Also watch the leader 120 video on 1107, it's seems amazing to me.
Currently I'm using the 1140/4000kv's to power my 3-inch, 2 blade, with 550mah 75c batts. Can I build a 2-inch with these 4000kv motors? Thank you, informational video.
Hi! Usefull video! Did you test 1103 15000kv? Can i use it on 2s? Wich prop (i think 2 inch) and battery? Thanks!
Do you mean 1102 motors? They do work with 2" 2s but better suited for smaller propellers, so I'm going to have 12500kv version specifically for larger props.
Aokfly 1103 15000kv
Never heard about them, will check when I have a chance
www.banggood.com/Aokfly-RV1103-1103-8000KV-15000KV-1-3S-Brushless-Motor-Black-for-80-100mm-Racing-Drone-p-1225174.html?rmmds=search
At amp esc should we use on this motor!?
Can you please try them without props? My consum 5A on 8.4V without prop. And ofcourse ESC cant handle them. I thik my are from falout series and I want to make reclamation.
Nice video
Thanks!
не мучайся, говори по Русски😁