Это видео недоступно.
Сожалеем об этом.
Understanding A/C System Pressures
HTML-код
- Опубликовано: 27 фев 2017
- Ryan provides an overview on reading and understanding different pressures in your AC system, along with potential problems these pressures can indicate.
Just what I was looking for, really great and clear.
Hi there, great video and explanation. Much Appreciate it.
So we have a midea split system with heat pump which doesn’t blow cold anymore the fan come on and humming noise you hear and then the fan turns off… also changed capacitor. Checked refrigerant pressure keep reading gauge 225 psi with system on full cold. All the currents are also ok ..
I have a system fully charged and when compressor is running both high and low go to zero pressure on both sides
Did you ever figure out what your problem was?
The ambient temp was 73.. low side 45 and the high side was 110.. the car cools during the night and in cooler weather but once it gets around 80 degrees it only cools a little while driving running but blows warm air at idle.. any suggestions?
Same here! Did you ever figure your problem out??
@@phillippardo5712 check fan clutch
I have low lp and hp... no leaks, holds vacuum. Fluctuations on lp side during charge. But going from 25 to 33 goring charge. Drops back to 23-25.. compressor jump wire test activates compressor, everything runs normal. Is it a possible clog or open expansion valve?
I have a ac on my car that the low side is low and the high side is high than I decided to put in r134 and the low went normal and the high went high high and my ac started blowing cold but after letting the engine running the ac stops being cold and the now the low side is high high and the high side is low like 0 reading what could be the problems? Please any suggestion would help thank you.
hire and specialist
My car ford low pressure is 70 psi high is 200 psi?
حبي حليت المشكلة ؟ نفسي الشي عندي