You just earned yourself a sub, and if I ever see you in person, a few beers too. I just got myself an Ender 3 v2 and the added 3D pad mini, i couldnt get the thing to do much, and nothing I did would get the damn print to stick on the bed. I have a tub full of pla string, so after pulling my hair out all night, I figured I would check youtube. Your video came up first and I followed your steps. BINGO! the little charecter is printing perfectly. cheers bro.
I feel stupid because I changed out my glass bed on my Ender 3 V2 for a dual sided magnetic PEI sheet for easier removal of my prints and I couldn't get anything to work. I watch this after hours of headaches and it turns out I just needed to warm up my initial layer... Thanks a ton JimZone! Happy New Year as well!
This worked Jim thank you. I thought these temperatures would be too high but it seems to be working just fine. Most of the time standard default works perfect but it recently started snowing here in Canada and its cold in the house. The drop of temperature in the house must be the reason. Also if you're printing shafts or anything else go to the rotating option on the right side of cura and press the lay flat option. Ive had imported models slightly at an angle and it screws up the start intern screwing up the whole print. Take your time making sure everything is perfect before you start printing. Its simple with practice and patience once you get the hang of it. Good luck printing y'all. Blessings 🙏🕊
Thank you very much. Just got mine yesterday and nearly wanted to send itt back because i thought it was spoiled. But after overtaking your settings my first print finally worked out. Hopefully the same for many more prints in the future. Thank you again.
Thank you so much! I just set up my Ender 3 pro and was getting frustrated to the point of returning it because nothing would stick. I'm very appreciative of you making this video, I followed your setting and it is printing perfectly!
ty I was about to buy a new bed thinking mine was bent out of shape but after watching your vid I found out that the Prusa slicer I was using was setting the bed temp to low.
Nice, i learned something new. i didnt know u had to mess around the settings on the Cura n not the printer. but for sures ill look it up more before i try it. keep making them helpful videos for 3D printing. been looking for helpful tips n knowledge.
Good video, I am having issues with this sticking to the base. I was told to try 'Elmer's Disappearing Purple Glue Sticks' Hopefully that works. Would be interested to see if anyone else is using things to make sure the filament is sticking down.
My sticking seems hit or miss. I always wash with hot water and soap, still sticking issues. Ive went from 60 degrees down to 45 and still issues. I havent tried above 60 though. Guess I'll try that
I am trying this. First day using mine and did 6 small prints fine, turn down come back and not sticking. Did leveling again but my plate looks a litthe dirty, tried a cloth but not sticking only in the middle. First pass on the side is super ok. No idea how to fix it now, i guess my weekend will be about how to fix that.
I'm not sure if it'll work or not. I have never messed with glass. Plate But try it. You can change the temperature on the hot end and if that doesn't work. Try adjusting the temperature on my Base
This helped me for my first print, thanks ! -ender 3 pro adhesion issue fixed. although not perfectly sticking (probably cause i need to clean with alcohol) But Definitely printing at least something now
No offense, but I had to watch this video on 2x speed. Awesome info, but I was really needing to hear it faster. I understand not wanting to skip over stuff, but maybe a page with talking points or a script might help
Im Sorry but if you stop listening yo yourself in your headphones and be more natural I think a lot more people will watch your videos. Get some experience in broadcasting. The best thing to do is to record yourself speaking and then watch yourself speaking. I tell it how it is.
I know I'm working on it. I know it's hard to watch. I just like the confidence. I'm about to get back into making more videos. But thanks for the feedback.
lemme save you 6 minutes:
set printing temp to 220 and bed temp to 70
Thx
So nozzle temp 220???
Thank you kind sir.
@@nostalgiaholic4874 yes
Glad I came to the comments first😂
You just earned yourself a sub, and if I ever see you in person, a few beers too. I just got myself an Ender 3 v2 and the added 3D pad mini, i couldnt get the thing to do much, and nothing I did would get the damn print to stick on the bed. I have a tub full of pla string, so after pulling my hair out all night, I figured I would check youtube. Your video came up first and I followed your steps. BINGO! the little charecter is printing perfectly. cheers bro.
Sorry for the late commbut you're welcome
I feel stupid because I changed out my glass bed on my Ender 3 V2 for a dual sided magnetic PEI sheet for easier removal of my prints and I couldn't get anything to work. I watch this after hours of headaches and it turns out I just needed to warm up my initial layer... Thanks a ton JimZone! Happy New Year as well!
This worked Jim thank you. I thought these temperatures would be too high but it seems to be working just fine. Most of the time standard default works perfect but it recently started snowing here in Canada and its cold in the house. The drop of temperature in the house must be the reason.
Also if you're printing shafts or anything else go to the rotating option on the right side of cura and press the lay flat option. Ive had imported models slightly at an angle and it screws up the start intern screwing up the whole print. Take your time making sure everything is perfect before you start printing. Its simple with practice and patience once you get the hang of it. Good luck printing y'all. Blessings 🙏🕊
No, I'm glad to help you.
First time using a 3d printer, my first print didnt stick to the build plate. This video fixed the issue, thank you.
Thank you very much. Just got mine yesterday and nearly wanted to send itt back because i thought it was spoiled. But after overtaking your settings my first print finally worked out. Hopefully the same for many more prints in the future. Thank you again.
You're welcome
Thank you so much! I just set up my Ender 3 pro and was getting frustrated to the point of returning it because nothing would stick. I'm very appreciative of you making this video, I followed your setting and it is printing perfectly!
Thank you, first successful print in a week. Finding these take lots of fine tuning and it changes over time.
Great to hear!
This was what solved my adhesion problems. Thank you!
Dude you just made my day been struggling to get this issue taken care of, thanks man …worked like a charm
Glad to hear it
ty I was about to buy a new bed thinking mine was bent out of shape but after watching your vid I found out that the Prusa slicer I was using was setting the bed temp to low.
Nice, i learned something new. i didnt know u had to mess around the settings on the Cura n not the printer. but for sures ill look it up more before i try it. keep making them helpful videos for 3D printing. been looking for helpful tips n knowledge.
I'm so sorry for some reason you're Comment got held up for review. You didn't say nothing wrong or anything but I am glad it helped.
Thank you so much, I was worried my nozzle was clogged or something and was about to change it
Good video, I am having issues with this sticking to the base. I was told to try 'Elmer's Disappearing Purple Glue Sticks' Hopefully that works. Would be interested to see if anyone else is using things to make sure the filament is sticking down.
Thank you. Will be trying this
so my first print went well my seccond is not sticking to the board and stringing comming out any suggestions
i am trying this now, i just got an enders 3 pro and having lots of trouble . hopefully this works i liked and subbed
That's cool man Let me know if any help 👍
My sticking seems hit or miss. I always wash with hot water and soap, still sticking issues. Ive went from 60 degrees down to 45 and still issues. I havent tried above 60 though. Guess I'll try that
Also have problem with normal pla. With pla plus i dont have that issue as much
Some people recommend putting a thin layer of Elmer’s glue stick on the bed
just get 3mm polycarbonate sheet same size as your print bed and print on to it you will thank me
Dang didn’t expect it to work but it did
great video fixed the problem first try great job!
Dude, THANK YOU!!
Thanks for this.
if i set the bed high like my print is going to cramp and all that things how to fix?
What do you mean, like cramp
first ever time i wish youtube had a 10x play speed
@@SnackCastS sorry
Hi this is a helpful video to most people but for me it still won’t stick and then all of it drags and just makes a mess
THANKV YOU JIM
worked 🙏
Did you make a video on leveling
I am trying this. First day using mine and did 6 small prints fine, turn down come back and not sticking. Did leveling again but my plate looks a litthe dirty, tried a cloth but not sticking only in the middle. First pass on the side is super ok. No idea how to fix it now, i guess my weekend will be about how to fix that.
Did you ever fix it, have the xact issue
Thx first vid to actually, help🎉🎉🎉
my problem is my prints wont stick they start out awesome than the damn thing moves my bed on 70 and my nozzle is 225 any idea
Do you have an under 3 or an ender 3 pro The ender 3 does not have an auto leveling bed The ender 3 pro I think does But the bed should not move
thank you so much! you saved me.
I switched to the glass plate and it was not sticking to the OEM. Should it work the same? Brand new to 3d printing
I'm not sure if it'll work or not. I have never messed with glass. Plate But try it. You can change the temperature on the hot end and if that doesn't work. Try adjusting the temperature on my Base
I will try the glass at some point. Got the magnetic plate in a went 215 and 70. Worked perfectly, thank you
This worked!!! Thank you!
u are loved.
I changed my settings to match yours and my prints still fail right at the beginning any ideas?
What is it doing
Even for me the PLA doesn't stick When it does like a circle around the object but the actual object that I'm printing stays If that makes sense
@@TonyTech3D the filament is just clumping up on the nozzle now
@@thedisciplez2411 sounds like it's too high from your bed if it's extruding out I'm glabbing up at the nozzle
@@TonyTech3D yea I lowered the nozzle to and its working now so I mustve had it just a tad too high
fast fix, thanks
It never worked for me it never would stick
I just got one spent 2 days now messing with it. It won't print anything. So upset
This helped me for my first print, thanks !
-ender 3 pro adhesion issue fixed.
although not perfectly sticking (probably cause i need to clean with alcohol) But Definitely printing at least something now
Be careful alchol can damage it. One guy used acid tone. And the alchol messd up workplate
No offense, but I had to watch this video on 2x speed. Awesome info, but I was really needing to hear it faster.
I understand not wanting to skip over stuff, but maybe a page with talking points or a script might help
Im Sorry but if you stop listening yo yourself in your headphones and be more natural I think a lot more people will watch your videos. Get some experience in broadcasting. The best thing to do is to record yourself speaking and then watch yourself speaking. I tell it how it is.
I know I'm working on it. I know it's hard to watch. I just like the confidence. I'm about to get back into making more videos. But thanks for the feedback.
6min of nothing, thx anyways... O.o