3ds max eğitsel, pathdeform, morpher, volselect kullanımıyla hiçbir script veya plug in kullanmadan toprakta oluşan deformasyonu taklit edeceğiz.. iyi seyirler
Have you made any adjustment when you applied Path Deform to the cylinder? My Morpher location dose not align with the cylinder when I change the volume selection to the cylinder.
05:35 i used "move to path".. but a few others talked about the same problem, I suspect that the morpher and path deform modifiers are corrupt when they work together in studio max 2016 and earlier versions.
you are doing something wrong. try everything from scratch. Create a rectangle of 140cm -- modifier list and garment maker :density0,1 -- IF USE MAX 2020 OR HIGHER VERSION U HAVE TO CHANGE RECTANGLE'S GARMENT MAKER DENSITY SIZE MAKE 0,3 !! -- make edit poly-- select all poly-- inset by polygon (0,3)-- select inverse-- delete-- shell - outer amout 1 -- convert to poly again-- clone copy (not instance) -- choose second rectangle and select elements all -- rotate elements (local)-- choose first rectangle -- modifier list and morpher -- pick object from scene and click second rectangle-- play with rectangle 02 slot -- delete rectangle 002 -- create sphere 6cm -- put - 0 - 0 - 0 on scene -- select rectangle and modifier list- vol select-- select by mesh object and click sphere for none slot-- - parameters stack selection level make vertex-- usesoft selection-- fallow 29-- put morpfer on top-- rectangle 002 slot make %100-- select sphere and play-- look from top and create a line for path.-- choose sphere - animation- constraint, path constaint and click line-- play and see- come to "0" again ( go to start) -- create a cylnder 6cm align to sphere-- height 1 - height segments 200 -- sides 7 or 8 -- hide sphere -- select cylnder and pathdeform -- pick path and click line 001 - move to path-- OPEN AUTO KEY-- go to 100-- strech 293 (or and of the rectangle) -- unhide sphere and play with strech value for every 25-30 frame-- CLOSE AUTO KEY-- click ractangle and come to vol select-- Replace the sphere with the cylinder from the "select by" section of the modified list-- hide sphere again-- hide cylnder--
The ctrl + I key combination allows you to select the inverse of the selected area, ctrl + A keys also allow to select the entire area, When you apply "inset" after selecting all the polygons (by polygon), intermediate spaces are created automatically. When you select the inverse of the selected area, the intermediate spaces will be red, you can delete them.
![Veeze - F.A.F (ft. Rylo Rodriguez) [Official Music Video]](http://i.ytimg.com/vi/7hlz2S2GmIY/mqdefault.jpg)
hocam konuyla ilgili en temiz en net tutorial bu olmuş gördüğüm kadarıyla eline sağlık
Teşekkürler
thanks
great job
thank you
nice
thanks
Have you made any adjustment when you applied Path Deform to the cylinder? My Morpher location dose not align with the cylinder when I change the volume selection to the cylinder.
05:35 i used "move to path".. but a few others talked about the same problem, I suspect that the morpher and path deform modifiers are corrupt when they work together in studio max 2016 and earlier versions.
At 5:37 when i turn on the autokey , the sphere has no effect on the volume select.
Vol select isn't responding to autokey
you are doing something wrong. try everything from scratch. Create a rectangle of 140cm -- modifier list and garment maker :density0,1 -- IF USE MAX 2020 OR HIGHER VERSION U HAVE TO CHANGE RECTANGLE'S GARMENT MAKER DENSITY SIZE MAKE 0,3 !! -- make edit poly-- select all poly-- inset by polygon (0,3)-- select inverse-- delete-- shell - outer amout 1 -- convert to poly again-- clone copy (not instance) -- choose second rectangle and select elements all -- rotate elements (local)-- choose first rectangle -- modifier list and morpher -- pick object from scene and click second rectangle-- play with rectangle 02 slot -- delete rectangle 002 -- create sphere 6cm -- put - 0 - 0 - 0 on scene -- select rectangle and modifier list- vol select-- select by mesh object and click sphere for none slot-- - parameters stack selection level make vertex-- usesoft selection-- fallow 29-- put morpfer on top-- rectangle 002 slot make %100-- select sphere and play-- look from top and create a line for path.-- choose sphere - animation- constraint, path constaint and click line-- play and see- come to "0" again ( go to start) -- create a cylnder 6cm align to sphere-- height 1 - height segments 200 -- sides 7 or 8 -- hide sphere -- select cylnder and pathdeform -- pick path and click line 001 - move to path-- OPEN AUTO KEY-- go to 100-- strech 293 (or and of the rectangle) -- unhide sphere and play with strech value for every 25-30 frame-- CLOSE AUTO KEY-- click ractangle and come to vol select-- Replace the sphere with the cylinder from the "select by" section of the modified list-- hide sphere again-- hide cylnder--
Is there any way to export this?
Like the final result with the pieces reacting to the vol select
How can you select only border after insert work?
convert to editable poly- select all(poligons)- inset (by polygon) - select invert!!- and delete this area
Deniz Yener Thanks
S. M. Abul Hasnat Rassel your welcome
At 0:44 how to select gaps after insert cmd . I don't know how to select gap for deletion
The ctrl + I key combination allows you to select the inverse of the selected area, ctrl + A keys also allow to select the entire area, When you apply "inset" after selecting all the polygons (by polygon), intermediate spaces are created automatically. When you select the inverse of the selected area, the intermediate spaces will be red, you can delete them.
@@deniz_yener thnx for quick response
@@jyotisahoo6095 your welcome brother