7:28 that's why I am going to root my phone ,clock the specs ,and rip through plastics apply thermal compound straight on the cpu finish the procedure for heat sink and sync the power source with my mobile's itself
The important specification to consider while buying a cooler is the Cooling power wattage, usually written as 10w / 20w/ 27w/ 45w on the specification sheet. most cheaper cooler uses 10w. but its very hard to go back to 10w once you use any coolers that are above 20w. Night and day.
@@DarkSoulEmperor ive used many. But the best and still using right now is Redmagic cooler 4 PRO (magnetic). Its a 27w cooler with Bluetooth connectivity for both auto/manual cooling level adjustments and RGB lights adjustments using the App. Its a great cooler but the down side is that you'll need a 30w and above Charging Brick to drive it for maximum cooling.
@@DarkSoulEmperor Depending on what youre after. Coolest? Largest area? I would highly suggest to look for certain reviewers first instead of getting scammed. High wattage alone does not make it good. Coolest - X65- 12-14$. Flydigi b6/b6x - 20$ Xiaomi 30w(17-33w) 25-35$ (there is literally no english name for this thing lmao) Iqoo 2 pro 40-50$(backclip) Surface area- X100 15$~ Oneplus 27w(also one of.the coolest) 35-40$ Blackshark br33 30$ Iqoo 2 pro (largest one rn iirc) Redmagic/nubias is usually just rebranded of existing brand with nicer+ better qc also app.
Also get a heatspreader. It would extend the cooling into non-camera area. Usually that is where the SoC is located. I got the magnetic graphene heatspreader for my Red Magic 6R. The plate covers non-camera area and of course the center.
@@mustahidrahman4978 also both the cpu and battery requires a fan imo as both plays a role , most of us dont cool the cpu instead and use them on battery
I added a cooler with the coldplate,or peltier cooler built in, I use on back of my asus rog ally, 10w mode I always seen 38degrees and with it on I seen 34 degrees tend to sit at 36 and less cpu spikes on the temp, never went above 39 , got a thermal pad over my cpu and a heatsink off a HD 5850 graphics card , fit perfect, close contact with the back plastic hoping the cold soaks thru to the heatsink..
Another downside is when water goes in the port and causes corrosion which will make it stop working. That's what happen to the black shark pro 2 cooling fan
Hey zendex thanks for ur effort for making this video but I noticed that all the coolers are quite big except few and would cause problems in holding the phone while gaming on a pro iPhone and non pro iPhones would be good if you can make videos on them too.
Hi.. I play bgmi on iphone 13 and I use realme buds 2 wired with the connector ... It works perfectly fine. Footsteps and game sound are perfectly clear
Phone coolers are really useful. Without my phone cooler my phone touch 44 degrees but if I play with my cooler it maintain my phone's temp 38-39 degree from 44 degree.
i have used a phone cooler on my iphone before using it the phone lag like crazy but after using it the iphone is working like beast i recomend buying one and ddefinatelty you sould use it
In welding workshops (where steel gets red hot) to make the steel cool again they simply put the object on dirt ground, and the ground acts like a heat-sink. So, to quickly cool your phone, just put it on a clean and cool surface (like a tile floor). The phone will cool down a lot within about 1 minute.
You are wrong, phone coolers don’t take air to cool down, they take air to cool down the thermoelectric hot side, there are two sides: one side cold , one side hot, so basically the fan is cooling the thermoelectric peltier. The cold side is cooling the phone down.
Is that an iPhone 15 Pro Max or a Pro? As I would be getting one MagSafe cooler for my 13 Pro Max and the main chipset area is the place where it heats the most and requires the cooling. (Below the Camera). Will MagSafe cooler work on that area? Or just the middle of the phone cooling the battery lol. Thank you waiting for your reply.
The main problem for me is the weight these coolers would add to my smartphone. You might be able to play for longer, but it's a trade off: your hands will suffer because of the added weight
Im worried the coolers with refrigeration chips will condence watter in the phone drawing and collecting moisture inside. Im guessing the higher the power, the more condensation. We are talking about longevity. For those of you who think its ok for your phone to be hot, it is hard on your components. Just look up the heat raitings on your sd card alone.
One thing to say, I have a Poco X3 Pro and can run codm low graphics ultra fps, but when I played, the phone temp is getting hot (area is tropical, philippines) and the fps starts to stutter a lot, then I noticed that when you are in front of an aircon and played codm, the fps stutter drop don't appear for a long time, thats when I decided to buy a phone cooler (bs3 funcooler) it really makes me happy that my codm don't stutter now
Say if i made a modification to my phone's back and i attached a copper shimmy and a vapor chamber through brazing and have a copper plate exposed to the open air ready for a cooler mount.. Would the thermal efficiency be increased? Im working on a design right now but im stuck between modding my phone to have active internal cooling vs just having a thermal contact extended from the SOC to an open air (effectively just a radiator that can be improved with the addition of a cooler,)
Don't put it in the freezer. The quick temperature changes will 100% cause damage over time. For a quick cooldown, close the App, put it below a fan for a Minute, has the same 'back to roomtemp' effect but doesn't cause microcracks. But yea, phone coolers are great.
I need this, but not even for gaming. Just playing music and running Google maps in summer down here in South Africa can increase the heat on my phone until apps stop working. Mainly when charging the phone.
Cooling your phones to 0°c will effect the lithium within the batteries along with other components. Its best to choose a balanced phone cooler just a range no less than 10•c and not more than 40•c
breh, if you don't know what a radiator is stop pretending to be a tech channel. The square thing you claim to be a radiator is a Peltier or Thrmo Electric Module, it can either generate electricity based on the thermal difference induced that is inverse to the output polarity or one can add current to the module to create a thermal difference. The way these coolers work is that they stick a heatsink to the hot side of the peltier module and a fan blowing directly on the heatsink to cool it down. The cooling depends on how well can the hot side can be cooled. Peltiers have power ratings and thus require equivalent heat dissipation to give any meaningful effect. These module are extremely inefficient and thus not commonly used to cool electronics like desktop/laptop cpus/gpus. Pelters can also crudely be compared to thermal and electric resistors.
Mera ipad 6th generation hai ping 20-30 ka aata h but game bahut lag marta h aaisa lagta h jaise 2gb vale phone mein khel rahe pahle aaisa nahi hota tha but aab hone lga h hit ki vajh se hota h kya aagr hota h to pls 1500 tk best cooler fan link 🔗 dedo bro
instagram.com/zendex69/ (Giveaway INDIA ONLY)
Join Discord - discord.gg/7ZwQEw9
Phone Cooler Amazon Links (Affiliated)
Basic Phone Cooler - amzn.to/3MGNS5k
amzn.to/3syEM3B 500rs Shown in the video
amzn.to/3ublYbb - 500rs Sticks to back of your phone (not recommended)
Advanced Phone Coolers
amzn.to/3Qy8nSU (1100rs) Realmi phone cooler (Refurbished)
amzn.to/49A9nyg (1300rs)
amzn.to/3QXhvSt (1250rs)
amzn.to/3udKrN5 (1500rs) Shown in the video
amzn.to/3SCnb5B (1500rs) Duel Fan Cooler
amzn.to/49xtjll (1800rs)
MagSafe Phone Coolers (Advanced)
amzn.to/46gvG9j (1300rs) Doesn't come with a backplate (only for Magsafe iPhone users)
amzn.to/3QRVHYa (BlackShark Phone Cooler) 7k-8k INR (android & iPhone users)
amzn.to/3QwC0UB (Triangle & Round Magsafe Coolers) *BUT THEY CHANGED THE PRODUCT*
amzn.to/3FW3KwY (Magsafe but also clamping Android/iPhone) i didn't buy this
Phone Coolers outside India
Recommended Brands - Razer, BlackShark, flydigi (or anything with good ratings)
Razer Phone Cooler - www.razer.com/mobile-accessories/razer-phone-cooler-chroma
Oh zendex you play arena break out?
Pedestial fan ❤
7:28 that's why I am going to root my phone ,clock the specs ,and rip through plastics apply thermal compound straight on the cpu finish the procedure for heat sink and sync the power source with my mobile's itself
Cubinic or spinbot is best?
What is the game name that you played at 52.0 time stamp. Please tell me
thats crazy playing with 3 phone coolers
I still think you eating fried bananas is crazier
Wow shibe is here
Lol
Woah woah hi shibe🎉❤
@@rasonancefried banana😋
Zendex's gameplay:- 😈
Zendex's voice:- 🥰
really???his hindu accent is so heavy
@@dejavucmail8176 tf is Hindu accent bro 💀
@@cheemogamingindian accent lol
@@dejavucmail8176indian accent* dumb@$$
@@dejavucmail8176 tf is that?
Zendex playing with Phone cooler in an Air-conditioning room 😎
Meanwhile me playing in smooth settings to reduce lag under roof Fan 😅
buy a table fan here in Pakistan i bought a used one for like 1000
❤
I also do the same thing but I play on hdr and 60fps settings still it not heats up 😂
nice joke 😂
Ceiling fan
@MohdKaif-vk8tc bsdk lindu kisa bola hutya
Just play inside the freezer
Only way for Redmi users 😢
😮😢 ha bhai
Oxygen salender lekr jana pr 😢❤
I personally who thinks all the time, has nothing to think about but thoughts 💭
@@Dr-MD-SAIF😂
Do not do the freezer, just like cold glass the ice will condensate and produce water inside and outside the case
Guy got so many coolers but didnt even do a game comparison with each one. Not even a benchmark.
The important specification to consider while buying a cooler is the Cooling power wattage, usually written as 10w / 20w/ 27w/ 45w on the specification sheet.
most cheaper cooler uses 10w.
but its very hard to go back to 10w once you use any coolers that are above 20w.
Night and day.
For you the best magnetic cooler it's ?
@@DarkSoulEmperor ive used many. But the best and still using right now is Redmagic cooler 4 PRO (magnetic).
Its a 27w cooler with Bluetooth connectivity for both auto/manual cooling level adjustments and RGB lights adjustments using the App.
Its a great cooler but the down side is that you'll need a 30w and above Charging Brick to drive it for maximum cooling.
@@DarkSoulEmperor
Depending on what youre after.
Coolest? Largest area?
I would highly suggest to look for certain reviewers first instead of getting scammed. High wattage alone does not make it good.
Coolest -
X65- 12-14$.
Flydigi b6/b6x - 20$
Xiaomi 30w(17-33w) 25-35$ (there is literally no english name for this thing lmao)
Iqoo 2 pro 40-50$(backclip)
Surface area-
X100 15$~
Oneplus 27w(also one of.the coolest) 35-40$
Blackshark br33 30$
Iqoo 2 pro (largest one rn iirc)
Redmagic/nubias is usually just rebranded of existing brand with nicer+ better qc also app.
@@sc9433 from where did you got that ?
Also get a heatspreader. It would extend the cooling into non-camera area. Usually that is where the SoC is located. I got the magnetic graphene heatspreader for my Red Magic 6R. The plate covers non-camera area and of course the center.
The air flow matters a lot, if you have ceiling fan with high speed that's very efficient
Thats the best way to cool the phone, the airflow will happen in a larger area rather than within a single circular arra
@@mustahidrahman4978 also both the cpu and battery requires a fan imo as both plays a role , most of us dont cool the cpu instead and use them on battery
5:45 Hi, what bumper model are you using on iphone? Is it possible to send a link?
Rhino shield bumper case from amazon
There are a few MagSafe coolers that also charge. They are more expensive but I recommend it.
Which ones?
Yeah you got any names?
@@f.f.2260 Benks makes a good one
Names please
Bro name
0:17 which phone cover you are using? is it only side border and no backpart?
I added a cooler with the coldplate,or peltier cooler built in, I use on back of my asus rog ally, 10w mode I always seen 38degrees and with it on I seen 34 degrees tend to sit at 36 and less cpu spikes on the temp, never went above 39 , got a thermal pad over my cpu and a heatsink off a HD 5850 graphics card , fit perfect, close contact with the back plastic hoping the cold soaks thru to the heatsink..
You are using
The air cooler i have used to cool down my mi 9t pro from 42° to 32 °C in the massive heat of the indian summers
What aircooler is that? Can you give me link?
@@liam3530 SpinBot IceDot Semiconductor Technology Mobile Phone Cooler Gaming Fan for Instant Cooling- Android and iPhones Compatible- (Black)
Which was that air cooler
Which cooler ???
@@minigamerx1656 spibot you can try good work they did in the cooler
Another downside is when water goes in the port and causes corrosion which will make it stop working. That's what happen to the black shark pro 2 cooling fan
I want to knwo if u can mist water or have water contact on the heated part or have a drip irrigtation to lower temps
I use mine upside down
Hey zendex thanks for ur effort for making this video but I noticed that all the coolers are quite big except few and would cause problems in holding the phone while gaming on a pro iPhone and non pro iPhones would be good if you can make videos on them too.
you will get used to new weight of the phone with phone coolers, there will be problems but you can always adopt to new ways of holding the phone.
@@Zendex69what’s the name of the phone case around the phone? where did u order it? 0:17
@@vhelyifruzsi.2293 its called bumper case
i got it from rinoshield
@@Zendex69 thankyouuu
1:57 where can i buy thay fog machine in the back?
Zendex transition from gaming to technical channel 😂
I have a question, Does the magnetic which is in the cooler have no damage to mobile like screen or components inside the phone !
Yeah it's not smart
@@Mr.Event501Thats why I don't use magnetic phone cooler
Damn when did he become a tech reviewer 😂😂. Gud vid btw wanted something like this from a real gamer
At 4:40, did you attach the basic cooler to any sort of thermal cooling pad?
The video was serious for me until 7:48 when I saw his wallpaper 😂
7:44 there are certain cases with heatsinks built in. They also come with built-in metal pads too. Try getting those instead
Zendex brother please make a video for earphones and headphone for iphone
With lighting to 3.5mm connecter
Please brother
Hi.. I play bgmi on iphone 13 and I use realme buds 2 wired with the connector ... It works perfectly fine. Footsteps and game sound are perfectly clear
Phone coolers are really useful. Without my phone cooler my phone touch 44 degrees but if I play with my cooler it maintain my phone's temp 38-39 degree from 44 degree.
Wish u a happy Diwalii brother,, by the way ur voice is nice dont use AI voices in upcoming videos,,All the Best .
0:24 why using fake diming to screen?
Is that how Zendex sound like ? 🔥🔥💀
Thank you for the video my friend. What is the vapor device at 2:03? It is very cool, I would like to get one :D
me cooling my phone with table fan, ceiling fan and wall fan🗿
Real Voice ji xuna paisu👌🔥 DeeRrrr
i have used a phone cooler on my iphone
before using it the phone lag like crazy
but after using it the iphone is working like beast
i recomend buying one and ddefinatelty you sould use it
Bro how can I get victor wallpaper on iPhone 7:48 😅😊
Bro lives in India 🇮🇳. Feeling proud to have most great tips and trick man for india❤. Love your content bro❤
havent heard you talked since a while, feels good to hear your voice again
4:18 what is that grey colour thing?
In welding workshops (where steel gets red hot) to make the steel cool again they simply put the object on dirt ground, and the ground acts like a heat-sink. So, to quickly cool your phone, just put it on a clean and cool surface (like a tile floor). The phone will cool down a lot within about 1 minute.
here room temperature are 40 degree Celsius.
You are wrong, phone coolers don’t take air to cool down, they take air to cool down the thermoelectric hot side, there are two sides: one side cold , one side hot, so basically the fan is cooling the thermoelectric peltier. The cold side is cooling the phone down.
Do you recommend black shark magnetic cooler?
Lot of respect and love❤❤❤
Brother can u tell me that chonchow phone magsafe coller can go to how much temperature plz tell I want to purchase it 🙏🙏🙏🙏
Bro plz tell plz 🙏
Which phone cooler should I use for my OnePlus 11 ?
Is that an iPhone 15 Pro Max or a Pro? As I would be getting one MagSafe cooler for my 13 Pro Max and the main chipset area is the place where it heats the most and requires the cooling. (Below the Camera). Will MagSafe cooler work on that area? Or just the middle of the phone cooling the battery lol. Thank you waiting for your reply.
Lol i also want one
Whats your battery health
@@Faraar_3 Battery Health is 84% the phone is around 1.5 years old
Zendex changing channel categorie to tech 😂
Very informative, Thank you!
Bro,does any water content(mist) inside phone?
Give me the link of best worth cooler pls
Table fan is enough bro even if your ambient temp is 36 i can play bgmi at smooth ultra which is max settings for my device
Question which phone cooler is good for gaming?
Advanced and the third type
noo bad for phone inside water
brow what is the game your playing in 0:55 please tell me
Arena breakout
Bro I have Asus Rog 5 and iam thinking to buy OnePlus cooler what do you say ?
1:55 what is the product.can anyone saying....
The main problem for me is the weight these coolers would add to my smartphone. You might be able to play for longer, but it's a trade off: your hands will suffer because of the added weight
Old Zendex with AI Voice is an emotion🫠
The real sound of zendex
Very extensive review, thank you!
Hello for the black shark magnetic cooler will it work well with the s23ultra , i mean will it magnetize to the back well
Did you find any good one for the s23 ultra?
Please give the link of the bumper case mentioned in the end, where can i get it from or please provide the link…
Im worried the coolers with refrigeration chips will condence watter in the phone drawing and collecting moisture inside. Im guessing the higher the power, the more condensation. We are talking about longevity. For those of you who think its ok for your phone to be hot, it is hard on your components. Just look up the heat raitings on your sd card alone.
What’s the best small fan?
Realme
@@SaveFACTS bro it is not available in new condition in realme store also does buying it from amazon refubished is safe
What is your case name.. i kinda want that, a case that protect the sides and didnt cover the back for cooler temp
Hey did you find it ? I m also looking for this type of cases.
One thing to say, I have a Poco X3 Pro and can run codm low graphics ultra fps, but when I played, the phone temp is getting hot (area is tropical, philippines) and the fps starts to stutter a lot, then I noticed that when you are in front of an aircon and played codm, the fps stutter drop don't appear for a long time, thats when I decided to buy a phone cooler (bs3 funcooler) it really makes me happy that my codm don't stutter now
One question.
Isn't the part most heating near the camera??
I mean the processor and gpu are all near the camera, so the heating
Memo cx07 best or worst
Your thought
0:52 which game are you playing???
When forgot to turn on my phone fan cooler 🌚 0:39
Say if i made a modification to my phone's back and i attached a copper shimmy and a vapor chamber through brazing and have a copper plate exposed to the open air ready for a cooler mount.. Would the thermal efficiency be increased?
Im working on a design right now but im stuck between modding my phone to have active internal cooling vs just having a thermal contact extended from the SOC to an open air (effectively just a radiator that can be improved with the addition of a cooler,)
Put the cooling pad on the cpu it self bro
Who's listening to zendex's voice for the first time even though watching him from 2018
👇
If you're in 10°you are in a phone cooler and you don't need a phone cooler.
Don't put it in the freezer. The quick temperature changes will 100% cause damage over time. For a quick cooldown, close the App, put it below a fan for a Minute, has the same 'back to roomtemp' effect but doesn't cause microcracks.
But yea, phone coolers are great.
I need this, but not even for gaming. Just playing music and running Google maps in summer down here in South Africa can increase the heat on my phone until apps stop working. Mainly when charging the phone.
Is that Advance phone cooler is used for iphone Or also can be used in Android?
Yo i thought you're a American or other youtuber after I hear your accent I can confirm that you're Indian RUclipsr ❤❤
Does the heat sink work on leather back phones like poco x6pro?
the details you added to this video, appreciate
that ☺️
MashaAllah Your Voice Is So Calming
I got the blackshark phone cooler for $40 USD. It’s easily a game changer I am now able to play all I want with 0 frame drops💯
Well said ! He can’t talk about the area size is also matters which is cool down
does phone cooller work on leather back phones ? (as my phone is realme 11 pro the back is made up of leather so does it work? )
yes
@@Zendex69 thanks for the reply 🥰
0:50 which game is this ? 😲
Arena breakout
Arena brakeout
Your English is the same as mine 😅😅
I have also Razer phone cooler ❤
If its still work when they have phonecase?
Consider removing it
I've got a question tho,what are the things to look at the spec when buying phone cooler can u list it down so i can buy the right product
I'm using archer mobile cooler and it really help me and fix my mobile low brightness problem
Bro,does water content enter inside our phone??(I mean mist)
What phone case do you use for your iphone?
Can I use a phone Cooler while my backglass is broken??
yes
@@Zendex69 thank you bro mine I coming tomorrow and was afraid it will harm my device because of the cracks
Million dollar smile of victor ❤
0:51 game name plz
Gigachad. Great video man sold me to get a phone cooler
Are you vadakan 😂
Does the coolers works with powerBank....? Please reply
Cooling your phones to 0°c will effect the lithium within the batteries along with other components. Its best to choose a balanced phone cooler just a range no less than 10•c and not more than 40•c
3:11 Disappointment!! What a failure!
Welcome to peltier coolers. It's how they work. Thermoelectric cooling produces condensation.
breh, if you don't know what a radiator is stop pretending to be a tech channel. The square thing you claim to be a radiator is a Peltier or Thrmo Electric Module, it can either generate electricity based on the thermal difference induced that is inverse to the output polarity or one can add current to the module to create a thermal difference. The way these coolers work is that they stick a heatsink to the hot side of the peltier module and a fan blowing directly on the heatsink to cool it down. The cooling depends on how well can the hot side can be cooled. Peltiers have power ratings and thus require equivalent heat dissipation to give any meaningful effect. These module are extremely inefficient and thus not commonly used to cool electronics like desktop/laptop cpus/gpus. Pelters can also crudely be compared to thermal and electric resistors.
Wow..
The classic Victor wallpaper
Mera ipad 6th generation hai ping 20-30 ka aata h but game bahut lag marta h aaisa lagta h jaise 2gb vale phone mein khel rahe pahle aaisa nahi hota tha but aab hone lga h hit ki vajh se hota h kya aagr hota h to pls 1500 tk best cooler fan link 🔗 dedo bro
Bro i have a qus, we attatch it to our phone is it possiable there will be water inside surface of the phone?
Did you use the coolere To your phone when you play?
won't those coolers might build up moisture due to condensation in some humid areas? and that would be bad for the phone.
Do the Magsafe coolers work on iPhones with a case?
Finally after a long time his own voice👍