Your videos are great and entertaining. As a note regarding safety, you should consider the pairing of wire size and breaker size, and maybe mention that to your viewers (you hooked up a 15-20A cord to a 30A breaker!) Judging from the other comments, some people would blindly follow along with your install video and not even consider to check their wire is rated for the amperage of the breaker. Also, please consider putting your 120V splice inside a junction box. Best,
Even though it will cost a bit more, I'll be using the ecoflow kit in my next van/truck camper build. Aiming for 1200ah @12v system. I have 960ah in the current van build. Love that the ecoflow is plug and play and you can't get anything wrong. I've done 2 van builds and built out each van's electrical system and it was a fun process but very time-consuming.
It is so helpful to know about the kits. I have set up a 2KW system in my crude van setup and didn't have a kit.It is also alternator charged. I am now building an off grid cottage that will be using an off grid system charged by solar and I will be using one of these kits. It will make my setup so easy, as you have shown. Thank you
Nice presentation. I’ve used Ecoflow Delta Max with Extra Batteries for years in both my Airstream and truck camper. Solid equipment. I’d certainly go for this kit were I doing a new project.
on my e350 i used the already existing hole just above the gas pedal - thru the firewall - tucked in to the plastic guy already there on the cowl - routed to the battery. i want this system now
Don't know if you mentioned the specs. What size battery and inverter size. How many 12v connections are there? I see you said how many AC there are. This is a great system.
Off topic … in an older video… where did you get the frame protection done in Rancho? I live in Sac and my Van has zero rust cuz it was a sherwin Williams paint truck from Tracy CA and only went to Auburn CA … I would love to protect it after put my lift on it … or do I do the protection before lift? Thanks for any advice in advance
Hello, i don't see the products links for LED Strip. Tell me which one. I know there are many and many. Which one did you install. Thanks !!! Great video !!!!
@seven_o_savage you connected that ecoflow wire to a box under your car and that box is connected to your alternator. I need to find out how to connect the alternator itself/to that box. Anyways thanks for showing how the ecoflow works that's the one I'm getting myself hopefully it's durable.
Your videos are great and entertaining. As a note regarding safety, you should consider the pairing of wire size and breaker size, and maybe mention that to your viewers (you hooked up a 15-20A cord to a 30A breaker!) Judging from the other comments, some people would blindly follow along with your install video and not even consider to check their wire is rated for the amperage of the breaker.
Also, please consider putting your 120V splice inside a junction box.
Best,
Even though it will cost a bit more, I'll be using the ecoflow kit in my next van/truck camper build. Aiming for 1200ah @12v system. I have 960ah in the current van build. Love that the ecoflow is plug and play and you can't get anything wrong. I've done 2 van builds and built out each van's electrical system and it was a fun process but very time-consuming.
Love it!
Another great video, for the time and effort saved, clean installation and if it proves reliable looks well worth it to me. Thanks
Thanks! Would love to do a long term review in a year.
It is so helpful to know about the kits. I have set up a 2KW system in my crude van setup and didn't have a kit.It is also alternator charged.
I am now building an off grid cottage that will be using an off grid system charged by solar and I will be using one of these kits. It will make my setup so easy, as you have shown. Thank you
Nice presentation. I’ve used Ecoflow Delta Max with Extra Batteries for years in both my Airstream and truck camper. Solid equipment. I’d certainly go for this kit were I doing a new project.
on my e350 i used the already existing hole just above the gas pedal - thru the firewall - tucked in to the plastic guy already there on the cowl - routed to the battery. i want this system now
Great video - this is so much easier. But shouldn’t you be putting crimped ferrules on the wiring without lugs?
Don't know if you mentioned the specs. What size battery and inverter size. How many 12v connections are there? I see you said how many AC there are. This is a great system.
Off topic … in an older video… where did you get the frame protection done in Rancho? I live in Sac and my Van has zero rust cuz it was a sherwin Williams paint truck from Tracy CA and only went to Auburn CA … I would love to protect it after put my lift on it … or do I do the protection before lift? Thanks for any advice in advance
I posted it on my IG it’s within the last 10 posts. He is the man tell him I sent you !!
@ ok thanks … I follow you on IG also so I will look and screen shot it … thanks again
Hello, i don't see the products links for LED Strip. Tell me which one. I know there are many and many. Which one did you install. Thanks !!! Great video !!!!
I knew I was forgetting something! Sorry just added them
Nice system. What did you use for the ceiling in the van. Is that wood? Would it be a good choice for my sprinter??
Tambour wood paneling. Jury is still out as it squeaks after install. Haven’t had time to try and fix it.
ok, and if one of the components f.e. the converter is broken, you have to buy a complete unit!?
sorry, no deal!
How many amps is the battery, it is a 5kwh !? Nice build by the way👌💪
I went with 5kwh due to space restrictions but you can get them anywhere from 2 to like … 15 I think
Great video! Have been watching for a long time and have always loved your content, speed of videos and explanations. Nice work!
Is this Power Kit 2?
Nope gen1. Same exact process for gen2 it’s just bigger
You didnt show how you connected your alternator to that box.
Alternator connected to battery -> battery terminals connected to ecoflow
@seven_o_savage you connected that ecoflow wire to a box under your car and that box is connected to your alternator. I need to find out how to connect the alternator itself/to that box. Anyways thanks for showing how the ecoflow works that's the one I'm getting myself hopefully it's durable.
yup ... el quicko
WOW