I have a black muffler like that, I bought from a different seller. But that is smaller than mine. Poked a hole in the spark arrestor and it sounds really cool. Can hear it on my channel on my Stage 1 Hemi 212.
This exhaust is crazy! It's insanely loud and crackles and pops without the muffler , the muffler is kinda junk , mine blew off lol , I had it threaded in tight, it blew off right before the threads lol , great exaust though
Fight Central They are loud and pop but I definitely like the low-end power it puts out. Yes those mufflers are cheap and I have gone through many of them. But it two dollars apiece they work for a few weeks LOL
Trying to find the bent tube torque pipe you got I was unable to buy the bullet jackshaft you have since hotrodminibike no longer has a website I can find
Not sure which torque tube you’re referring to, also the billet jackshaft I have found those for sale for the 49 mL bicycles, but you end up having to buy different sprockets. I’ll take a look later and see if I can find any of the links.
@@2AM_Garage your loop pipe Stevenson I'm guessing from looking I'll have to go threw Facebook to order it it's a cool pipe I'm hoping it will fit a Tilly
2SlickNick where can I get a pipe like that at I need to order one too I just need the party boats to the engine I have the 22 horsepower predator also what size are the pipes half inch
Nope it will not fit stock db wheel. You can buy the OMB sprocket adapter( like $35 bucks I think ) and then by split sprockets ($15). I have an adapter and love it.
Aww man, i didn't get any magic stickers from ombwarehouse when i got my flywheel and connecting rod. I feel ripped off now. Where did you get that filter for the breather tube?
Lol. I just asked and they put those in the box. I got the breather filter at adVance auto parts. They are $10. I Believe they actually call it a crank case filter.
Screw it on tight...Lol. I had one that actually blew or broke off before too. Luckily they are only $3. I normally run the open pipe and use the muffler just to be a little respectful.
I have a black muffler like that, I bought from a different seller.
But that is smaller than mine.
Poked a hole in the spark arrestor and it sounds really cool.
Can hear it on my channel on my Stage 1 Hemi 212.
Totally, I did the same.
Your torq converter and chain makes more noise then usual
you can find these little mufflers in most tractor parts stores for 10usd
I have seen the mufflers as low as $3
I have seen muffs as low a penny's!
I've seen mufflers for free
Ive seen mufflers fall from the sky
Love OMB
This exhaust is crazy! It's insanely loud and crackles and pops without the muffler , the muffler is kinda junk , mine blew off lol , I had it threaded in tight, it blew off right before the threads lol , great exaust though
Fight Central
They are loud and pop but I definitely like the low-end power it puts out.
Yes those mufflers are cheap and I have gone through many of them. But it two dollars apiece they work for a few weeks LOL
2SlickNick what's the best place to get the mufflers?
Fight Central tractor supply or Home Depot's, ace hardware...
Thats what the strap is for .
To clamp the muffler on with a worm clamp once it is screwed in , hopefully with blue Locktite.
Trying to find the bent tube torque pipe you got I was unable to buy the bullet jackshaft you have since hotrodminibike no longer has a website I can find
Not sure which torque tube you’re referring to, also the billet jackshaft I have found those for sale for the 49 mL bicycles, but you end up having to buy different sprockets. I’ll take a look later and see if I can find any of the links.
www.bmikarts.com/Jackshaft-Plate-for-79cc-196cc-212cc-Engine_p_20833.html?gclid=CjwKCAjwxo6IBhBKEiwAXSYBs0BYHQHava4WfRtZUKgwtR3BbG9aV29VmmV43glaybvIY3MyxPaofRoCiF0QAvD_BwE
@@2AM_Garage your loop pipe Stevenson I'm guessing from looking I'll have to go threw Facebook to order it it's a cool pipe I'm hoping it will fit a Tilly
@@heathenprojects2639 www.robertsonstorquetubes.com/product-page/coleman-x-loop
@@2AM_Garage thank you just placed my order you the man
Where did you get the fuel tank mount from?
I made it from the gas tank bracket from 3/4" square tube and a larger piece of angled steel. I welded it up.
2SlickNick where can I get a pipe like that at I need to order one too I just need the party boats to the engine I have the 22 horsepower predator also what size are the pipes half inch
where did you find that rear sprocket? I'm looking for a 40/41 chain size for mine. #35 ain't cuttin it anymore
That is a sprocket for an x7 pocket bike they are like $12 on eBay. I also have the x7 rim - so it fits.
Damn, so it probably wouldn't fit the stock wheel. Is it a 6 bolt pattern?
Nope it will not fit stock db wheel.
You can buy the OMB sprocket adapter( like $35 bucks I think ) and then by split sprockets ($15).
I have an adapter and love it.
Are those pocket bike tires n rims what did u have ro chance to put them on??
Yes I did install and use those pocket bike tires
Aww man, i didn't get any magic stickers from ombwarehouse when i got my flywheel and connecting rod. I feel ripped off now. Where did you get that filter for the breather tube?
Lol. I just asked and they put those in the box.
I got the breather filter at adVance auto parts. They are $10. I Believe they actually call it a crank case filter.
Do you happen to know what the size of the connection end of the muffler end is? is it 1/2 or 3/4 of an inch?
I believe it is the 1/2" thread size... The smaller muffler.
+2SlickNick alright thank you
Where did you get your wheels?
Thx
Why isnt your throttle hooked up?
Because I did not have a cable. When I bought this bike it did not have a cable.
where can i find that gold chain?
I typed in gold 420 chain on ebay.
how did you apply the stickers?
Brock Morgan clean and dry the location area. Peel off backing, apply, and press evenly firm. Rub and press while lifting the other backing off.
You need to fix yiur carb coz it dont idle
Hmm that's a small muffler I seen ones that are bigger I haven't seen one of those small ones before
Where did you buy your tire and rim from
Mark Melebeck eBay.
ruclips.net/video/iOdOi05Xnik/видео.html
What size sprockets are you running?
Owen Williams I think this set up was a 10T jackshaft and a 38 T axle sprocket.
@@2AM_Garage that information is useless to you
A WEINER PIPE OMFG IM DED
Crusaderz RC I guess they named it after how it looks.
my wiener pipe muffler feel off when riding, very crappy weld job at base of the can before the screw in part/ threads
Screw it on tight...Lol.
I had one that actually blew or broke off before too. Luckily they are only $3. I normally run the open pipe and use the muffler just to be a little respectful.
Cheap, Chinese bullshit
Will it fit 79cc predator?
Nick Hersheys I think so. The flange is the same as the 212. And I'm pretty sure it probably has enough clearance
2SlickNick Thank you.
Nick Hersheys now remember I don't know for sure because I've never done this.
So if you buy it don't take my word as 100% LOL
I did my own research and l'm 90% sure. Will keep updated. Will go to Harbor Freight store and measure the exhaust with a caliper and reply back