360gh on my overclocked Iceriver KS0 Pro Kaspa ASIC!! (Shroud giveaway! PBFARMER OC!)
HTML-код
- Опубликовано: 19 май 2024
- In today's video I test out some different shroud options on my KS0 Pro! I was able to achieve over 360gh!! Do you want to win a KS0 Pro shroud like the one I use in this video? Make sure to like the video and follow the instructions I give to participate in the shroud giveaway!!
ANYTHING YOU DO TO YOUR KS0 PRO INCLUDING MODIFYING AND OVERCLOCKING IS 100% AT YOUR OWN RISK!
Here are the exact products I used in this video! These links are Amazon affiliate links. I get a small commission if you use them at no extra cost to you and it helps support the channel! Thank you for watching!
240 watt Power Supply is a must for aggressive overclocks!!
amzn.to/3xdREy6
DUAL AC Infinity AXIAL S1238D, 120mm Muffin Fans with Speed Controller. This is the exact setup I use in this video.
amzn.to/4cFcmXN
Single AC Infinity AXIAL S1238, 120mm Muffin Fan with Speed Controller. This is an option if you don't plan to aggressively overclock. You could mount this fan to the shroud kit or the top of the KS0 Pro!
amzn.to/4czsiee
ARCTIC TP-3 Thermal pads:
amzn.to/3TRE4YG
Thermal Glue: amzn.to/3PR2HDT
ARCTIC MX-6 Thermal Paste: amzn.to/3PSsAmW
Copper Heatsinks: amzn.to/3vHPPJh
THE COPPER HEATSINKS I USED IN MY "HOTROD YOUR KSO PRO" VIDEO HAVE BEEN SOLD OUT FOR A WHILE!! THE LINK ABOVE IS AN ALTERNATIVE THAT SHOULD WORK JUST FINE! I WILL BE TESTING THESE IN THE NEAR FUTURE. These come with tape, which I have been told works but I still prefer a more permanent solution like the thermal glue I have listed above
READ THIS BEFORE YOU GET STARTED! OVERCLOCK AT YOUR OWN RISK!!! github.com/rdugan/iceriver-oc...
PBFARMER OVERCLOCK LINK! github.com/rdugan/iceriver-oc...
Here is the link to where I downloaded the file for the shroud I used in this video! www.thingiverse.com/thing:641...
Don't forget to keep it decentralized for... The Greater Good!
DISCOUNT CODES & AFFILIATE LINKS:
- ICERIVER 2.5% OFF DISCOUNT CODE!! = GREATER www.iceriver.io/?refer=GreaterGoodMining
Looking to purchase an AMAZING Kaspa mining BEAST?! Use my exclusive discount code and save 2.5% off your Iceriver order!!
- TANGEM WALLET 10% off DISCOUNT CODE!! = GREATERGOOD
I use Tangem wallet to safely store my Cryptocurrency like Bitcoin and Kaspa!!
tangem.com/en/?promocode=GREA...
- It's tax season. Don't stress, just use Koinly to prepare your crypto taxes! They make it easy and have tons of tutorials on RUclips! koinly.io/?via=69E1400C&...
- METER BOX 10% OFF DISCOUNT CODE!! = GREATER
I monitor power consumption on all my mining equipment with Meter Box power meters!
www.themeterbox.com/r?id=3cfbtn
- FRUITION DESIGNS 15% OFF DISCOUNT CODE!! = GREATERGOOD
Silence your ASIC miner and save on electricity with a Fruition Designs kit!
fruitiondesignsllc.com/
- I bought the new PDU that you might have seen in some of my videos from Altair! They also sell mining equipment, control boards, cables and have hosting services! Check them out here altairtech.io/aff/23/
- If you're looking for Crypto merch like stickers, banners, mousepads, shirts etc. then you have to check out Cryptee! Here's a link to my collection www.cryptee.co/collections/gr...
- If you're looking for mining equipment, hosting, cool merch and much more check out my friends at Coastal Crypto!! Use Discount Code Greatergood for 2% off!! www.coastalcryptomining.com/?...
- I currently have GPU's & ASIC's hosted at terrahosting.io/ Great group of people running Terra Hosting! Check them out!
- Keystone Cryptocurrency Hardware Wallet affiliate link: keyst.one/?rfsn=7685725.a224f...
- I love using @coderofstuff_ Kaspa ASIC calculator! I use this calculator frequently to speculate on possible Kaspa ASIC ROI projections! Here's the link to the calculator if you want to try it out! kas-breakeven-calc.vercel.app/
Follow me on Twitter! / gr8ergoodmining
Check out my Discord! / discord
Nothing I say is EVER financial advice or electrical advice. This is for entertainment only! 
Наука
Nice video, for anyone who wants to OC his ks0 pro to this level bear in mind that you will have to replace the two 5 amps fuses or else they will overheat (not blow) and the miner will restart all the time
Good stuff! Like you alluded to, the issue is one of static pressure. The larger shroud simply addresses this by dumping some of the air to the outside, but i don't know that it actually sends much more air over the power stages (maybe a little bit, because you don't have as much reverse buffering of air due to the insane pressure).
More 'powerful' (higher SP) fans are an option, but that often means higher RPMs and thus noise. But pressure is additive w/ fans in series, so I would guess the best option for just power stage cooling while still being relatively quiet would probably be a fan on both ends (push/pull) w/ these more directed shrouds. Or technically you could try to just stack fans on one end for push/push, though ideally you want them spinning in opposite directions, which would probably be hard to find.
You're the man brotha! I always love hearing what you have to say about my set up and tweaks that I've made. The push pull method definitely helped cool off the power stages, but then it seemed like the chip temps dropped too much again. I'm new to 3D printing but eventually I want to try to design my own shroud with a smoother transition and maybe one that covers the barrel plug as well. More FAFO sessions to come! Thanks for all your help and input! :)
I also use the push/pull method using two high SP fans. The main reason though is safety. If I am overclocking with only 1 fan and it fails ..... disaster. Thus two fans
@johngermain5146 I agree 💯 👍 I like to push these things to the limit just to see what they can do. But that's when I can watch them closely. If I know I won't be around to keep an eye on things I'll put an extra fan on to make it push pull again for sure
Bro! You grabbed the Bambu!!! 💪
Yes sir! And I bought your download for the big boy Kaspa ASIC shrouds! I don't know how I went so long without a 3D printer. Love this thing so far!!
WoW :O 360GH!! Amazing video! keep up the great work!
Thanks PJPlayhouse! I finally achieved my quest to get 360gh lol
@@GreaterGoodMining its amazing! its not many people who made that :D
@PJPlayhouse twas not an easy path lol 😅
@@GreaterGoodMining Yea I bet
Awesome setup 👍 do I need to get a 3d printer now?😂
Yes brotha! I can't believe I went this long without one.. dooo it! 🙃
U get it!.
I bought 2 fans, first the 5v ac infinity s3 and the high speed ac infinity 1238.
The s3 performs best on the metal deck, dropping from 72c to 62c exhaust. Although I think my shroud is not the best because of the reverse pressure and the loss of wind(Bottlened). So adding the 1238 barely reduces your maximum exhaust of 58C.
With 320 Mhz and 30 mv I only get 280/310 GH and maximum temperatures of 121C maximum power and 90C exhaust. Not worth it. Silicone lottery, I guess...
Also with 1238 I hear a very harsh sound when I try to sleep with my family.
Yeah I hear ya, the fans can be noisy! Maybe try noctua fans? I used some in this video and they are impressive how quiet they are! ruclips.net/video/GuaZdZwdodo/видео.htmlsi=ImbZoKJWNA6swoe_
Yo dude those CMP cards I bought seem to be stuck at memory clock 810 no matter what I put. Ovalbore told me if they go over temps 81 it will stay at default I put Dell Blower fans a they running about 72 but still stuck at 810 why?
I'm not sure what you're asking? CMP cards? Did you mean to respond to a different video?
#shroud I replaced my failed TVM barrel to 6pin power cable with a 6 pin power socket (Ebay seller 1990dfring) and a PCIE power cable to my 750W HP Server p/s (12V). Tswift @ 300 Ghz, chip temp avg. 65C. 10" box fan blowing from Power Connector end w/ plates removed, Heatsinks installed, repasted and new Thermal Pads. Internal Fans moved to outside...
That sounds like a really nice set up!
Wait what? this is well..., Great!
LOL, I agree! 360gh has been the Holy Grail for me and I finally hit the mark!! 😀
xt 60 plug work great for me
Im sorry I missed it, what is the difference between this overclock and the other ones?
With this firmware you adjust the overclock and voltage yourself. This way you can optimize your settings for your specific machine to get the most out of it
Amazing Video Man, love your KS0 Pro modding content 👏🚀 #shroud
Thanks Raptor I appreciate it! This one was fun to make :)
Great video.
I try and keep mine near 300GH. Seems anything higher. Really pushing these.
Have you tried solo mining again? Im really surprised how it’s doing better than pool mining past month. Just FYI
I know what you mean about pushing them too much harder. Seems like these things somehow, so far, have held up to me absolutely abusing the crap out of them lol. Probably won't last as long this way. But the power stages and chip temps are under control at the moment. Guess time will tell! Lol
what is your clock offset setting? thanks mate
435 is where I landed for this video
I printed that same skinny shroud and trying it on mine. I haven't tried to see how far I can push it though. I was worried about how hot is too hot on the power stages. #shroud
It's worth a shot, I did get pretty impressive results, but I'm also worried it just won't cut it long term
How far have you been able to push your KS0 Pro?? 🚀
300gh
Im maxed mine at 320 gh i figure its safer number to run at my biggest concern is fire must be safe
@@thecanadianpunk-miner4life I agree, safety first. I like to push these things hard for fun, just to see what they can do. Probably will add the exhaust fan back on for safety
I'm afraid to overclock this tinny machine, Also love the bambu lab, been looking to replace my flsun qqs pro for a while and it's my first choice by now :) #shroud but from Canada hahaha
Yeah it's always risky overclocking these things, especially to this extent lol But I have fun fun with this stuff and like to push them to the max just to see what they can handle HaHa I'm loving mt Bambu labs 3d printer right now!
Try work inside of the refrigerator to see what will happen.. I only got about 300-310G...but...chip temperatura is only 37 celsius... With pbfarmer too... With usb fan side barrel plug...
Those chip temps are too low. There is a sweet spot for optimal functioning when it comes to chip temps. The minimum I want my chips to be running on the KS0 Pro is in the low 50's
@@GreaterGoodMining I guess that's why I can't speed it up anymore
#shroud At this point looking to increase hashrate anyway possible since the Pro is making just around $1 for me now. Thank you for the video and chance to win a shroud!
Thanks for watching! I'm hoping that Kaspas price goes up and rewards all the miners who have stuck with it and supported the project! :] Good luck in the giveaway!
🤯
Mind blown! Lol
My veteran miner power cable melted into my ks0 pro. Even with a fan right on it. Hopefully I can fix it.
Oh damn :-0 Yeah those cables aren't meant for use on overclocked KS0 Pro's. I hope you can fix it. I believe The Veteran Miner has a video where he solders a new 6 pin connector to the KS0 PRO IIRC. Might want to check out his videos and look for that one specifically
@@GreaterGoodMining or avoid all those problems and solder the power cable direct to the board
@Hansen710 I feel like my barrel plug temps are OK as is. But if you're using a lower voltage power supply and you don't want to use a shroud that blows air over the barrel plug then I agree, that's a good way to get around it 👍
Awesome video as always ,Thanks #Shroud
Thank you I appreciate it! 🙏 This one took a while to pull everything together but I'm glad I gave it a shot
I get 300 gh/s with vr temps of 80c. Using the green shrouds from meter box. Those shrouds blow too much air outside over the fins. I see why you want to blow air inside over the copper fins but temps rise fast once you exceed 300 gh/a. #Shroud
It really is a difficult balance once you get to the 300gh range. Little tweaks make a difference, and it takes forever to watch to see the results after each small adjustment. It can be maddening lol Thanks for watching and commenting, I appreciate it!
Great video! I need to tweak mine more...
#shroud
Yeah there is always a risk with overclocking and modifying for sure. I have fun messing with these things so I can't help myself lol. This is my first 3d printer and I love this thing. The on I have in this video is a Bambu Labs PS1
Thanks, I appreciate you watching! Good luck with the giveaway :]
I have a new KS0 Pro sitting in the box with a 230W power brick. Looking for a reason Not to auction it off for a quick profit. Thanks for the motivation. I think 51' C is fine for the barrel plug. #Shroud
Nice! Have fun with it 👍 Thanks for letting me know your opinion on the a barrel plug, I agree 50c doesn't seem too bad. It was warm to the touch but that's it
Is it possible to overclock ks0 ultra and al box
Probably will be able to overclock the Ultra. ALbox, I don't know, havnt heard anything yet, but I'd be willing to bet someone is working on it
#shroud I don’t know how you are running at those power stage temperatures. My KS0 pros will crash out the power stage if they stay above 100 for an extended time.
For some reason the most recent two KS0 Pro's that I have tolerate the higher temps on the power stages without any problem. Might be that silicon lottery
Awesome content sir!! thanks #shroud
Thank you I appreciate that! Good luck in the giveaway!
Merci beaucoup pour ta vidéo, très intéressante. Serait il possible de me donner la référence de ta prise mural pour avoir toutes les données ? Bonjour de la France
It's just a standard 120 volt outlet for the KS0 Pro
@@GreaterGoodMining ok super merci
Dunk it, problem solved. 🙂
I have a feeling I will do that eventually HaHa Love this stuff!!!
@@GreaterGoodMining Immersion is the future IMHO.
@basementracer7622 seems like you can't beat it. Quiet, efficient etc. If I had property I would definitely be looking at immersion
#shroud Great video, the barrel plug is concerning
Thanks for watching! Yeah that barrel plug gets hot 🔥 🥵
@@GreaterGoodMining im using same kind of shroud, the only difference is my plug is on the inside and gets cooling
it goes in through a hole on the side of the shroud...
got it on etsy
i have a ductfan between two kso (suck air in through 1 and blows out the other)uses 40w and works better then the pc fans
placing the fan between 2 also makes it more easy to push air through those small openings.
for sure alot of power is wasted because of trying to blow alot of air throught those small openings
if the fan is not beteween it will push some air back, when it tryes to force air through the openings
Sick video bro! #shroud
Thanks I appreciate it! It was a fun one to make!
#shroud I'm from France so I'm not participating, but I really enjoyed the video!
Nice printing, what is your 3d printer?
Hi! Thanks for watching and commenting!! The 3D printer I have is the Bambu Labs P1S. It's a bit expensive compared to the others, but I'm new to 3D printing and I heard that Bambu are pretty easy to work with. They self level etc., So far it seems very user friendly. I went with the P1S because it is enclosed and that apparently makes printing with ABS possible. I want my shrouds to be ABS because it's more resistant to the heat that our miners can produce. Thanks again for watching and commenting, I appreciate the support!
@GreaterGoodMining Thank you for taking time to answer :)
@@BartsB18C6 no prob!🙂
Can u show to.change.gui?
I have tons of videos on overclocking with PBfarmers overclocks. Check out this video where I show you ruclips.net/video/kMS4DQi0GZo/видео.htmlsi=u0C2QiKInnI9OgbE
My temps are great using a server fan with meterbox shroud, #shroud
Yeah I think that's the way to go. Powerful single fan and a MeterBox shroud FTW
#shroud, thanks for the vid, usa. i love mining and 3d printing content
I can't believe it took me this long to get a 3D printer. It blows my mind what you can do with these things 😮
Why do they have to be warmer? What happens when you cool them too much?
The chips have an optimal operating temperature. Think of your car engine, it likes to operate in a certain temperature range too. When the chips run too cold, they don't perform as well 🥶
@@GreaterGoodMining ah very interesting! Never imagined. I always thought the cooler you could get them, the harder you could run them for peaks 🫡 super cool stuff
@@lilsnavelz Gotta find the Goldilocks zone for your specific miner to get the most out of it :] But in general colder isn't always better when it comes to chip temps
@GreaterGoodMining always appreciate the information! 😀 I don't have any mining rigs, I feel like I've gotten informed a bit late in the game where it's almost better for me to invest in the coins rather than rigs. Amazing stuff to watch though
@lilsnavelz I think we're at the point where if you buy mining equipment now you could still stack some coins but soon it will make sense to sell daily, then soon after that it'll make sense to sell the equipment
looking forward to win your #shroud :)
The winner for the shroud was already picked last week. This is an older video, but thank you for watching and commenting!
#shroud finally got my KS0 Pro, time to mod...LOL
Nice! Happy Mining my friend!
# Shroud Great video
Thanks I appreciate that! Good luck in the giveaway!
#Shroud - USA - Keep it up!!!
Thanks JokerMiner! Good luck in the giveaway brotha!
Shroud
What is the mv at thank you
Voltage offsetbis 47. I show it in the video and talk about it etc
Thank you
that a smart design #shroud
It seems to be working pretty well so far except for the downsides I talked about in the video. Good luck in the giveaway!
🎉🎉🎉Yay FAFO! #Shroud
You are always first bro, it's amazing!!! HAHA 😀
FAFO shroud did pretty dam good! But I still want moorrrrreeeeee! lol
@@GreaterGoodMiningLiquid or cryo😮
#shroud for my ks0 pro and or ks0
Thanks for watching 👀 The shroud will work for either one :]
#shroud another great video
Thanks I appreciate you watching! Good luck with the giveaway!
Congrats! You won the KS0 Pro shroud! If you follow me on Twitter or have joined my Discord DM me there and we can verify details etc!😀
@@GreaterGoodMining your link to your discord says its invalid and i cant send a dm in twitter
@bhavr02 oh sorry about that, try this link discord.com/invite/XXXwuP6K
@@GreaterGoodMining Thanks GGM!
You didnt show how much power your now drawing at the wall on that laptop charger my guess is your over the 80% rule?
I did show it in the video. I showed the Meter Box again and talked about it. It was 220 watts total including the fans. So the actual KS0 Pro itself was pulling about 200 watts, the fan separately was pulling about 22 watts. It's a 240 watt power supply. So I'm about at the 80% rule
@@GreaterGoodMining I assumed when you showed the box that was before adjustments. I'm very surprised it wasn't drawing more cool!
@thecanadianpunk-miner4life Sorry I probably should have slowed down a bit when I showed my final settings and power consumption. I watched the video again and it was a pretty quick transition lol
It’s an old wives tale - or at least just a misunderstanding that’s been repeated so often it’s now assumed to be true. 80% rule is for building circuits running a constant load. PSUs are made to run their rating - *on the load side*. Which means line side (at the wall) can be even higher
Nice video #shroud
Thanks I appreciate it! 🙏
#shroud
Thanks for watching, good luck with the giveaway!
I get over 360 with 380 peaks with a full shroud on the power side, generic 235cfm 6000rpm fan @ 30% for over two months. You should only pull 190 watts to get that output. And yes, kick that barrel plug to the curb. If it's hot to the touch, divert. No Predator needed. The constant resistance on that barrel plug isn't affected by a fan. The mosfet's should only be hitting 60-70. Lesser quality KS0's are going to plunge to the low 200g's and not put up with all of that. You guys spend too much money on these these little guys that pump out less that $45 a month.
Silicon lottery is definitely different for everyone. I have fun modding and messing with my KS0 Pro's :] The barrel plug is warm to the touch, not hot. I did say a higher cfm fan and a single shroud would probably work best. I'll be trying that next as I said in the video. Happy mining!
How can I hit you up? Can you send me link to your discord ?
Link to my Discord is in the description of the video 📹
#shroud
Thanks for watchin and good luck in the giveaway!
#shroud
Thanks for watching 👀
#shroud
Thanks for watching, good luck with the giveaway!
@@GreaterGoodMining i apologize, i forgot to like your video first watch. dont worry i liked it on the second go around
@chasecookson922 no worries lol Thanks for watching again and liking! Seriously the likes help a lot and so do the comments. If a lot of people like and comment, the video will catch a bit of traction usually :]
#shroud
I don't want it,
Skip me, brotha.
I just want to see how lucky I am. 😂😂😂
@@Stantheman-jv5kv HaHa You'll find out how lucky you are soon my friend!
Thanks for watching I appreciate it!! 👀