The first KS0 I got from IceRiver had one of those screws on the lid laying in the box. The 2nd one had 2 screws very loose. I guess they added loctite later
I have a question while rebooting the Pro I went ahead and disconnected the power supply Big no no now I know that. It turns on but won't connect to the Internet can't get to open the Web page do you think I bricked it?
@@crypto440 The miner turns on but no flashing lights in the front neither green or red turn on and is not connecting to the Network obviously so I can't get in the miners Web page.
Hi friends! I updated with overclocking firmware and it was bad for me on my Iceriver Ultra. Could someone help me with this problem I have on my IceRiver Ultra in IceRiver V.1.0.23 Monitor in the "Detect IP" tab identifies the IP but I can't access the miner page via browser (off line) and in the tab from ice monitor where it says "Miner Management" this IP appears "none". And the miner's reset button does not accept resetting the equipment as both lights stay on straight on, which should after 30s the green light start flashing (which indicates the device has been reset). Any alternative, for example, some tutorial for this recovery or even messing with the internal circuit (guideline video or explanatory note) or something like that to unlock this. At least release or reset button equipment to work and restart the iceri river ultra.
@@edmundodejesusaraujojunior1025 if you used the tswift firmware it's soft bricked. The instructions are very detailed and list what not to do to avoid this. They can remote in and fix it or crypto440 can swap the bios chip for you but it's not something it seems you can fix yourself. That's why I only use PB Farmer firmware. It doesn't have those issues plus the dashboard is awesome.
@@TheMiningCabinet Friend, do you know if there is PB Farmer Firmware for that model for iceriver ulta 400ghs? I decided that I will send my Iceriver Ultra with this lock to the manufacturer Iceriver to fix this problem, it would be more prudent.
My KS0 Ultra was a direct purchase from Iceriver, it was Junk out of the box. NEVER worked correctly. It is now on it's second warranty repair trip back to the Factory, first repair did / corrected nothing.. But THEY said it worked there, even tied to pass off a video of it working on the repair bench. Utter Garbage..!!!
Congratulations on your extremely high-quality content and we Brazilians are really rooting for the growth of your channel.
The first KS0 I got from IceRiver had one of those screws on the lid laying in the box. The 2nd one had 2 screws very loose. I guess they added loctite later
@@TheMiningCabinet that makes sense then.
I'll open when we get OCs.
Backing up the eeprom would help a lot to solve my problem, if you can do it I would be immensely grateful.
Thankyou for this video 😊 I was desperately looking for this hardware comparison between KS0 Pro and KS0 Ultra.
So which mining rig do you choose now?
@@jonathon_minersking I already have KS0 Pro
@@BaklolRUclipsr This is a good mining machine, brother, you are very discerning
@@BaklolRUclipsr I'm following you, and I want to know how profitable it is?
Interesting..figured there would be more chips, but I guess they just used better chips. Can't wait for the oc
yeah i'm very interested to see overclocks the chips are running at 75*c already. wild!
Can't wait to see your take!
Have you purchased KS0 Ultra yet? How does it perform?
What thickness of thermal pads is needed when replacing?
could you run the ultra on 12v? as the ks0 pro ?
There you go. ruclips.net/video/DgQRcHS-15k/видео.html
what if we can take maybe 5 boards in one other case and plug them together ? is this possible ?
Thats kinda what the bigger asics are. It would be cool to stack them in a case. Although you would still need 5 ethernet cords.
I have a question while rebooting the Pro I went ahead and disconnected the power supply Big no no now I know that. It turns on but won't connect to the Internet can't get to open the Web page do you think I bricked it?
Did the ip address change. Did you try scanning for it
@@crypto440 The miner turns on but no flashing lights in the front neither green or red turn on and is not connecting to the Network obviously so I can't get in the miners Web page.
Can't do anything because not connecting to the internet. Thank you for your help.
@GerardoBernardino I see. When you said it turns on i figured the lights turn on. Sounds like there is an internal issue with it.
is your kso ultra pulling more than 100w?
@ISeeDeadGamers on the wall side, maybe 110w on the miner side, it's right there around 100w
Hello, if you backup the eeprom, I would be very grateful if you could forward it to us who have the bricked machine. Thanks!
@trsilvax I got it dumped this morning I'll send it along when I get off of work
Impossible to remove that warranty sticker without showing signs. I also wasted lots of time on a kso pro kaspa special edition trying ;)
Hi friends!
I updated with overclocking firmware and it was bad for me on my Iceriver Ultra. Could someone help me with this problem I have on my IceRiver Ultra in IceRiver V.1.0.23 Monitor in the "Detect IP" tab identifies the IP but I can't access the miner page via browser (off line) and in the tab from ice monitor where it says "Miner Management" this IP appears "none". And the miner's reset button does not accept resetting the equipment as both lights stay on straight on, which should after 30s the green light start flashing (which indicates the device has been reset). Any alternative, for example, some tutorial for this recovery or even messing with the internal circuit (guideline video or explanatory note) or something like that to unlock this. At least release or reset button
equipment to work and restart the iceri river ultra.
這篇有說明風險
@@edmundodejesusaraujojunior1025 if you used the tswift firmware it's soft bricked. The instructions are very detailed and list what not to do to avoid this. They can remote in and fix it or crypto440 can swap the bios chip for you but it's not something it seems you can fix yourself. That's why I only use PB Farmer firmware. It doesn't have those issues plus the dashboard is awesome.
@@TheMiningCabinet Friend, do you know if there is PB Farmer Firmware for that model for iceriver ulta 400ghs? I decided that I will send my Iceriver Ultra with this lock to the manufacturer Iceriver to fix this problem, it would be more prudent.
@@edmundodejesusaraujojunior1025 yes PB Farmer has firmware for all of the KS0 models and I think all of the larger IceRiver Kaspa miners as well.
Surely you've turned it on, what do you think about it working best at higher temps vs lower as it should? Kinda strange behaviour
I can literally fry an egg on mine... No joke seriously. It's insane
In fact, in Russia you can use it for heating
Did it turn on after?
Yes it did
Good video thanks
epic video
A Fingernail - Brush would probably a good Friend for them...
1k for that? :(
They are going for $350+ shipping.
@@crypto440 🤔
@@crypto440 Why is it so expensive? Where did you buy it?
@jonathon_minersking I bought it directly from iceriver.io the price has come down since the pre-order price to 239$ + shipping 😅
@@crypto440 So how much is your shipping cost?
Hey
👋
@@crypto440 where did you order from iceriver directly ??
@bigsub24 yes pre ordered
@@crypto440nice pretty cool but sad to think the pros are becoming obsolete now but saving power is a big deal and more hash rate at the same time
My KS0 Ultra was a direct purchase from Iceriver, it was Junk out of the box. NEVER worked correctly. It is now on it's second warranty repair trip back to the Factory, first repair did / corrected nothing.. But THEY said it worked there, even tied to pass off a video of it working on the repair bench. Utter Garbage..!!!
Yeah, there are some lemons out there for sure. Sorry to hear that.