Mowing down 15FT TALL Thorn Bushes with the VENTRAC Tough Cut! You won't believe this!
HTML-код
- Опубликовано: 7 апр 2022
- Mowing down 15FT TALL Thorn Bushes with the VENTRAC Tough Cut! You won't believe this! Plus, what did we find on this property? Check it out!
Thanks again for watching another episode on The Lawn Care Life in Mowssouri channel! Hope you enjoy!
I don't know what you got yourself into but I have faith in that machine ❤️❤️💯👍👍👍
That’s what I’m talking about!
You did exactly what you should have done, dont try to smash through that bocage all at once, bit by bit is best for the machine, bravo,very well done!
Ohhhh yeah. Bite off a little at a time. Thanks for watching!
I was betting myself that there was nor way the VenTrac could handle that. Two hours is amazing and my respect for that machine grew leaps and bounds. Thanks for the video.
Ohhhh yeah. It impresses me every time that I use it 😳. Amazing machine! Thanks for watching! More videos to come...
That Ventrack is Totaly impressive! And your Vision of your Property is Excelent!!
These videos are so satisfying to watch, thx for taking us along for the ride.. Awesome machine...
That was a great job. The VENTRAC is truly an amazing machine. God bless. 💪👍✌️
Thanks for watching! Crazy how it tackled it with ease! Wait til you see the next video...
Was thinking you needed a helmet and face shield. Once you got in thought protective cab surround.
Excellent job! You're fearless! 👍👍👍👍👍👍👍👍
This probably the most impressive video I have seen for the Ventrac toughcut yet.
I would love to rent one for about a week. Thanks for the video.
Thanks for watching! You would definitely have fun running the Ventrac Tough Cut!
Love that mower
It’s a pretty wild machine! I’m always amazed at what it can do.
Impressive! I was just in some brush today with my Ventrac that was along the same liness. Brush/thorns were about 1/3 the height but I had a LOT more of the trees that were 2-4' taller than the ROPS on the Ventrac :)
Oh wow! Did you take the trees out or were they too much for the Tough Cut?!
That was incredible. Our 4520Z is due for delivery in a few weeks. I keep thinking of all the jobs we'll do and then we see your videos and add to the list!
Can’t wait til you guys get the NEW 4520! You’re gonna love it. Unbelievable what these machines can do! Appreciate the continued support. MORE VENTRAC vids coming!
That Ventrac is a beast!!! Thanks for another great video!!!
Yeah buddy! Thanks for watching man. I appreciate the support! More VENTRAC vids coming!
Great you didn't leave us hanging, no job to tough for the Ventac 4500 great job Camron!!
Haha that’s right
Great job
Thank you! I appreciate the support. 👍
I think the Ventrac did one hell of a fine job. I know you were so glad when that job was behind you. Enjoyed a full-watch. Have a fine week 👍🏽🤠 8/1/23
Thank you so much. Appreciate you watching the entire transformation. It's crazy what this machine can do. That was one FUN job. Have a great day!
Love that machine!! Great job!
Meeeeeee too! Thanks a lot! Appreciate you watching the video. Stay tuned for more in the future...
That mower flattened those thorn bushes like a bulldozer! Great job!
THAT MACHINE WAS THE BEAST AND THE HERO AND YOU AS WELL AWESOME 👏 JOB
Thanks a lot! It is definitely a BEAST! Appreciate you watching the video!
Тем кто проектировал и создал эту замечательную машину - браво!!!. Замечательная техника, очень помогает и в селе и в городе. А вы очень хорошо на ней работаете 🎉 теперь на этом участке можно и строить и овощи выращивать😅. Вы брльшой молодец!!!😊
Thanks for watching
Man i love that little tractor and the work it does.
That’s crazy you were only there for a couple of hours with that much thick brush and all the filming. Nice job.
What a great job. Abd that machine is a monster. Thank you
Thanks for watching! It really is a MONSTER! 😳 😎 👍💯
Man oh man oh man oh man!!! ....... Now that's what I'm talking about! ........ One hell of a mower if that's what you want to call it! ... GREAT video!
Haha ohhhh yeah. This machine amazes me every time I use it. Appreciate you watching the video! More coming...
been there done that many of times what was i thinking LOL! but you Sir are an operator you have a great tool and you know how to use it thanks for sharing this!
Haha right! Man the things we get ourselves into lol. Appreciate you taking the time to watch! 👍💯😎
GOOD JOB and thank you for you fantastic video. God is Blessing you for sure.
You are awesome! Thank you so much for the kind feedback. Hope you enjoy the future videos of the Ventrac in action!
The toughcut has to be one of the prime attachments Ventrac has for that mower. I know Tim of TTWT has one of these with his (even though he runs a diesel 4500.) That was a fierce project for everything. Good to see the rock didn't do anything.
The Tough Cut really is unbelievable! That grown up mess took me 45 mins to knock down. I’ve hit several things on accident, but it hasn’t even damage the attachment. Pretty solid deck! Appreciate you taking the time to watch. 👍
This is really an interesting machine,..great job
CoOL stuff !! 😁 i enjoyed watching 😜
That's one badass machine the Ventrac 4500+ 👌
Thanks for watching! Appreciate you checking out the vid. More VENTRAC 4500 videos coming! 💯👍😎
I have watched this one several times and I love it
That’s awesome! Thanks for taking the time to watch.
Ventrac is a terrific machine...did a great job on that mess.
Thanks for taking the time to watch! I appreciate it. The Ventrac is an animal for sure!
Great job that you and the Ventrac did
Thanks a lot! Appreciate you watching. 👍😎💯
Excellent job 👌
excellent job well done 👏🏾 and hard work of hands. ❤️👍🏽😊✌🏽
Thanks a lot! Appreciate the support! 💯
Great Job!!! Looks AMAZING!!!👍🏻💯👍🏻💯🌲
Thanks! Appreciate you watching. 👍
@@TheLawnCareLifeinMowssouri you’re welcome!!👍🏻💯
That things a beast.Awesome job.
Man yeah! Thanks a lot! I’m always impressed with the job it ends up doing on these overgrown properties. Appreciate you taking the time to watch. Hope you have a great day!
Beautiful job!
THANK YOU! Appreciate you watching. 👍
Beautiful work by your driver and work it doing.
Those bushes can be pulled out by the roots when small but only you Ventrac or a tractor can cut them when they get that big. Great job there,
Yeah, the VENTRAC didn’t mess around on this one! Appreciate you taking the time to watch. New videos coming soon...
Cool machine!
Thanks for watching! Appreciate it. 👍
One hell of a machine ....
It's a tough machine!
Personally, I think this kind of brushwood and undergrowth is too much for the Ventrac and not designed for it. So it probably won't last long doing it. For clearing land like that, I use my small farm tractor with a front loader and put the bucket on it fitted with the 3 feet spikes. I lower the bucket with the spikes to just above ground level and drive into the brushwood then lift it up on the hydraulics, ripping out the brambles and sapling roots, then tip it onto a bonfire. That way it doesn't grow back again for at least 5 years. So, I can just cut it with a normal flail mower in between times if I get around to it.
Not a bad idea at all! I could take the bucket/grapple and tear it up a little bit. But this job in particular was easy for the Tough Cut. Took about 45 mins to knock it all out. I’m like you though, pulling it up by the roots and burning it would be a great option to keep it from coming back quickly. Thanks for watching and sharing your tips!
great informative video, thank you !
Thanks for watching! Hope you enjoyed watching the VENTRAC go to work!
nice job, that's a great machine.
Awesome job.
Thanks! Appreciate you watching.
Enjoyed so much 👍
Thanks a lot for watching!
Man that been track system can tear some stuff up. That is awesome how it walks through those briar bushes like that
Yeah, it’s crazy how it just cruises through knocking down thick brush. But doesn’t leave a trace of a machine being there. 😳 Appreciate you watching the video!
For what you had to work with it did a good job. Now you need to get the flail more that ven- track came out with.! Call them up and see if you can do a re- view on one so you can can pear.!
I’ve been trying to get a Flail mower demo, but can’t get anyone from Ventrac to help me out. No dealers around here are willing to let me demo one. Appreciate you taking the time to watch!
Incredible!!!!
Very Very Nice Job!!!
Thanks a lot! Appreciate the continued support. Have a great day! #God1st
I love to watch that machine work!
Ohhhhh yeah! It’s unbelievable what it can tackle!
We also have a Ventrac with brush cutter at the golf course in Carlshamn, in Sweden. It is so good machine. 🇸🇪
Nice video.
Greetings from: ZEG
Thats pretty cool showing come out the other side!
Ohhh yeah! Kinda gives you an idea how nasty it was to knock down. 😳. Thanks again for checking out the channel. 💯
Awesome job
Thanks a lot!
Nice work!
THANK YOU!!!! Appreciate the support. 👍
fabulous work
Thank you! You are the best. 💯
I have those on my property and i need to borrow your machine.What a great mower.
Nicely done!
Thank you!
Good job 👍
Thanks a lot! Appreciate you taking the time to watch. 👍
Nice bit of kit mate !
It is nice to see that machine work, ... Good brush cutter...
Thanks for watching! Appreciate the support! 💯
@@TheLawnCareLifeinMowssouri 🙏
Awesome job Brother....Love Your Videos.
Thanks a lot! Appreciate you taking the time to watch. 😎
Looks super fun! I wish I could do this for a living
It’s very satisfying knocking out these overgrown properties. Thanks for watching!
You can. Go finance one and advertise. Someone will call. Then, if you do a good job, they'll tell someone else, who will tell 2 more people 💁♂️ take that risk
You can do it …. Only thing holding you back is you …. Money is not the issue …..
Great job Cameron! Did a similar one last fall..3/4 of the way thru it ran over a hornets nest…they DON’T like mowers! Got stung a dozen times in like 2 seconds! Now I keep Benadryl in the side compartment.
Oh wow! That’s awful. I’ve always been Leary of entering into the unknown. I’ve been attacked by hornets while on the mower too many times. Surprised I haven’t been stung while on the Ventrac. That’s a great idea to keep something on board for when it does happen. Appreciate you watching the channel! Thanks for the support. 👍
Ouch! I got stung once today when I was clearing brush on the Ventrac. I know better but was wearing shorts and it got me on the leg :)
@@tlchomestead shorts or long pants; hornets don't care, they sting ya either way!
That mower is impressive...
VERY impressive! 💯
Man, that machine is beast, I thought the vines would wrap around the blades and wheels and bogg you down, cool vedio, Thanks!
Yes, it’s unbelievable! 😳. It just ate right through it! Appreciate you taking the time to watch. Those vines and briars were no match for the Ventrac Tough Cut!
Awesome…just ate up those thorn bushes as if they were taco’s…and a great looking machine too
After watching this video I am sold on the tough cut ventrak
Absolutely! It’s a MACHINE! 😳. I can’t believe the stuff it’s able to tackle. Thanks for watching!
I had an old John deer f 710 that came with a front mount deck that would raise up to about 30 inches if I remember correctly. It was a slightly heavy grass cutting monster .
Just found your channel, love it❤
Glad you found the channel! More videos coming…
A forestry mulched would have been a better choice for this job. Faster and wouldn’t leave the tangle of matted down vines on the ground that the Ventrac left behind.
Still it was impressive that the Ventrac could even get through that tangle of briars and small brush.
The Ventrac Tough Cut lives for these types of jobs. Always impressed how it just slices right through the briars and small brush. I wouldn’t mind having a cab though lol. Constantly have to ease into it and try not to get cut up by the briars. This job took 45 mins…in and out without tearing up the ground beneath.
Trac cut is a very good mower, I love to have one.
Can I make a suggestion, start at one end and take small swipes as you go from side to side,have done so many times in cutting tall or mixed brush and it works much better than driving into it headon.
One of the reasons I cut it the way I did was so that I could get a good video out of it. Appreciate you taking time to watch!
You’ll have some bees and Yellowjackets in there - good luck 👍
That’s my worst fear. Running into some yellow jackets. Man those things hurt for days. Unfortunately I’ve got into them too many times in the past. Appreciate you watching!
Don't forget the latest horror🐝🐝🐝, the oversized murder Hornets from japan! 🐝😱😭☠😩😖🐝🐝🐝
and a huge helping of ticks too coming up out of the ground trying to latch on to you stay covered
Cool machine,.More Power Tim Allen Binford 😎
Haha yes! More power ughhhh. Thanks for watching! Stay tuned for MORE vids and MORE power!
Thats pretty impressive work. Never heard of Ventrac
Thank you. Yeah, the Ventrac is a mean machine. And very versatile. So much work that you can do with one these things. Appreciate you watching! 😎👍💯
Nice job, nice machine.
Thanks a lot! Appreciate you taking the time to watch. This was definitely a nasty job, but the Ventrac did great!
That is a very nice machine😀
Yes sir! Pretty unbelievable machine. Thank you for taking time to watch it put in some work!
That thing is a beast!
Ohhhh yeah! Thanks for watching! 👍
This is what I've been looking for someone to do a video in this kind of area I'm sold, no need to spend that much money on a skids steer this makes more of a better deal for me for my 20 acres. Thanks
Absolutely! The only reason I would choose a skid steer over the Ventrac is if you were wanting to lift a lot of weight and lift it really high. What attachments would you like for your 20 acres????
Honestly sounds like the wrong machine for twenty acres. Just buy a regular tractor
Fence off the land and get two cows
Totally agree… thanks for doing this video…. I can buy this along with 3-4 attachments and still do the work of a skid steer….. I understand that it’s not a skid steer but for what I need it for it would work out perfect
That is one beast of a machine.
Oh yeah! After every job I stand back and I’m like that VENTRAC is impressive! Appreciate you taking the time to watch!
Great stuff. Timber!
Thanks for watching another video! Appreciate the support here on the channel. Have a great wknd. 👍
Awesome video
THANK YOU!!!
this is a complete nightmare trying to do it all by yourself its veryyyyyyy tall to but i do watch plenty of lawn care videos and you another man i forgot his name has the tougher machines to get through this taller weeds grassy roots. so good luck 👍🏽 with this. i do enjoy watching y'all on lawn care. ✌🏽👍🏽❤️😊
Easy work for the Ventrac! 😎 Thanks for watching!
That Ventrac machine may be the toughest mower I've seen. What is the tough cut? Is it one in the same or and different blades or ? Good job!
It’s one TOUGH machine! The Tough Cut deck is designed to tackle thick overgrown grass, small saplings, vines, and brush. It has 3 heavy duty blades under the deck that are ready to tackle the tough stuff! Appreciate you watching! More vids coming...
How often do you have to sharpen the blades?
that lawn chair life is nice.
Haha I couldn’t agree more! 😂 thanks for watching!
great job
Thanks a lot! Appreciate you taking the time to watch! More vids coming...
Shrubbery that even the Knights of Ni don't want.
Hate those things. Shredd them all!
Haha...the VENTRAC didn't back down from the MESS!
Very Nice job at things and Eating machine
Brilliant machine. Versatile and quick to change front equipment. 👍
Really neat little machine! Thanks for taking the time to watch. 👍
Amazing machine.
It’s a WILD machine! Thanks for taking the time to watch. More vids coming! 👍
Awesome
Thanks for watching!!!
Wow real cool 😎
Thanks for watching!
That machine did a good job, but I felt like you needed it to be able to lift up about a metre, then you could attack the thorn bushes from the top and drop it down on them. They were nasty dam things
Love your videos man keep up the great work.
Thank you for watching the videos. I really appreciate it!
Man I have grown a strong liking to the Ventrac. How is the maintenance on that machine compared to a regular farm tractor with a 3 point bushhog? Thanks much
This is one amazing machine to say the least. I don't know how you never had a dozen flat tires
I'm amazed every single time I finish a job with this machine. It's crazy what it can tackle! When I got this machine, they gave me a product called TyrFill from the Carlisle company. GREAT PRODUCT! I would be rolling on flats if it wasn't for that product. Thanks for watching! See you in the next one. 👍
They are a beast of a machine.
At 5:58 min, seeing you trying to get through the bushes reminded me of that scene in the Jim Carey movie where he was sticking his head out through the Hippopotamus rear end.
Haha 😂 .... you gotta bob and weave when cutting down those sharp thorn bushes lol.
something that really helps with thorn bushes since they get tangled easily and won't fall to the ground for the mower to get to them is just take a cordless hedge trimmer and start from the top and work your way down with nice even sweeps,it takes little bit,but it doesn't take too horribly long.
I've tackled lots of thorn bushes with hedge trimmers back in the day. I try to stay out of them with the hedge trimmers now lol. The Ventrac is much easier at tackling it. Appreciate you stopping by and watching the video. Have a great day! 👍
You asked us a very silly question: "What did I get myself into?". It's easy. You found yourself a challenge, and your Ventrac got you through it without fail. Make sure you give her a good grease job, and make sure those blades are sharp. She'll take you through almost anything. I find that I'm fascinated by work. I can watch someone work for hours and hours. lol!!!
Wow!!!
Yeah 😳 Thanks for watching!
Man, you had a workout for the Ventrac on this property! It didn't seem to be a problem though.
Yeah! The Ventrac ate right through it! Thanks for watching!
Extremely tough job, Ventrac was able to take care of it, but with struggles.. I wonder if a mulcher mounted on a skid steer would not have been a better application.
I wouldn't have passed up a skid steer with closed cab and a mulcher on the front! It only took about 45 mins with the Ventrac though. Just had to be careful with the tall thorns hanging over. Somehow I didn't get cut up, but knew I was going to. Thanks for watching!