You used like 3 different primers lol. I’ve seen videos of people just buying tub and tile kits and doing it so much easier than this. You guys did a good job though
Connect it inside. run the fan from the bathroom door with the hose going out the nearest window or door. If it doesn't reach an additional extension hose will have to be connected so that most of the overspray properly exits.
I generally caulk before i spray it. That caulk is a little more expensive but worth it. If you use standard caulk then you just caulk after you spray. Its dry to the touch pretty quick. Less than 30 mins.
I live in a co-op. And unfortunately my bathroom only has a fan in the ceiling. There is no window. How would you the professional take care of the spray. Where with that vent out to other than the fan in the ceiling. I’m afraid it would smell the Whole apartment up. Thank you
It’s going to smell no matter what, but only 10-16 hrs (depending on temperatures). However, refinishers would have 75 feet of hose on hand, that’s what I carry. Somewhere you can find a windsor.
Yes! Generally people use a xxx acid etch to prep tile vs sanding. I’m guessing these guys have some sort of diamond sand paper or something. Your standard sand paper will not work, the resurface may stick for awhile but it won’t hold up.
It looked like they were only sanding down the areas were old grout, caulk, or adhesion was. The hydrochloric acid was to etch the tile for prep/ a lasting product.
@@levi.walton13Do you know what is the specific acid they use? There are many hydrochloric acid but the one they use is a specific one that I don’t know what it is.
If u live in Los Ángeles hit me up I do it for the low and best quality 600 for tub and walls for a job like this one and last 10 years for a fiberglass tub and walls it cost 500 with warranty of 2 years I don’t think any company beats that
It’s quality over quantity lol $600 I wount even go out and look at the job when I used to do it lol. Tub and tiles with regrout your looking at $910! I seen guys do it as low as $500 idk how but the work was bad and dident prep and skipped a lot of the steps! Just my experience.
This is the stingy landlord’s wait of “renovating”- bathtub. If you own your home, don’t even think about it. The steam from the shower will cause it to flake, peel, chip, and you’ll need to redo it every year. How do I know? I fell for it. Big mistake. A few years later I tore out the whole bathroom
The guy we use for tile refinishing will re-grout everything. Gives it a cleaner look. This look at the end...you could see the areas with low grout that either fell out or crumbled over the years etc
@@jgg204 if u regrout at the end, then the new grout is not protected by the glaze and is now susceptible to mold. If u Re-grouted prior to glazing, the glaze would’ve covered and protected the entire finish from mold.
Excelent!
Great job on the prep
Love the hose in the window, super sucking.
Nice video!
What kinda of hydrocloric acid did you use ?
Great video! What kind paint do you use as the top coat?
this some bangin spanish hip hop!
How durable is this coating? Also I think I read you maybe can't use spray bleach afterwards on it?
Can you spray that with an air sprayer?
How much does it cost?
You used like 3 different primers lol. I’ve seen videos of people just buying tub and tile kits and doing it so much easier than this. You guys did a good job though
How is it holding up in 2023?
Wow!!!
How long was this process? And whats a option if you dont have a window to ventilate
Connect it inside. run the fan from the bathroom door with the hose going out the nearest window or door. If it doesn't reach an additional extension hose will have to be connected so that most of the overspray properly exits.
the partially reglazed towel bar is messing with my OCD, but good job otherwise
Why did you use two different primers, clear and white?
clear is for adhesion, the white is to hide imperfections
wow that's beautiful - how much does it cost to do the tub and tile ?
Like $60 with rustoleum paint and tile
I'm in Maryland. It cost me $1100. LOVE IT!
@@poppyshoessp who did you use in MD?
In mich it cost me 925
@@cspbldg hey! Do you have contact info for your company? I'm also in Michigan
The huge gap between the tile and the tub at the end really bothers me
He's waiting for it to cure and then they will caulk it. Needs to wait 48 hrs
I generally caulk before i spray it. That caulk is a little more expensive but worth it. If you use standard caulk then you just caulk after you spray. Its dry to the touch pretty quick. Less than 30 mins.
But you cant use standard tub and tile caulk and spray over it because it wont harden and will stay soft.
I live in a co-op. And unfortunately my bathroom only has a fan in the ceiling. There is no window. How would you the professional take care of the spray. Where with that vent out to other than the fan in the ceiling. I’m afraid it would smell the Whole apartment up. Thank you
It’s going to smell no matter what, but only 10-16 hrs (depending on temperatures).
However, refinishers would have 75 feet of hose on hand, that’s what I carry.
Somewhere you can find a windsor.
@@bathtubrenew Any products you recommend? I want to DIY, but take professional steps for a good product.
I would removed towel bar
How long does it last and how do you clean it?
I'm also interested in how long these generally last.
People say 6 years. Clean it with regular ass tub soap
don’t u need to caulk it?
when I sand my tile, it does NOTHING to them in regards to scratching them or scuffing them up.... anyone else experience this?
Yes! Generally people use a xxx acid etch to prep tile vs sanding. I’m guessing these guys have some sort of diamond sand paper or something. Your standard sand paper will not work, the resurface may stick for awhile but it won’t hold up.
It looked like they were only sanding down the areas were old grout, caulk, or adhesion was. The hydrochloric acid was to etch the tile for prep/ a lasting product.
@@levi.walton13Do you know what is the specific acid they use? There are many hydrochloric acid but the one they use is a specific one that I don’t know what it is.
How much is the cost of this work for house owner ?
If u live in Los Ángeles hit me up I do it for the low and best quality 600 for tub and walls for a job like this one and last 10 years for a fiberglass tub and walls it cost 500 with warranty of 2 years I don’t think any company beats that
@@dahnyramos4254 What paint product do you use ?
It’s quality over quantity lol $600 I wount even go out and look at the job when I used to do it lol. Tub and tiles with regrout your looking at $910! I seen guys do it as low as $500 idk how but the work was bad and dident prep and skipped a lot of the steps! Just my experience.
So the is not a diy job. Got it. I was hoping to use a regular airless sprayer :(
Just use it. How is this not diy?? He did it himself lmao
This is the stingy landlord’s wait of “renovating”- bathtub. If you own your home, don’t even think about it. The steam from the shower will cause it to flake, peel, chip, and you’ll need to redo it every year. How do I know? I fell for it. Big mistake. A few years later I tore out the whole bathroom
So no regrout before refinishing the tiles!! Guess everyone does it differently! Nice job tho but consider regrout the tiles next time!!
The guy we use for tile refinishing will re-grout everything. Gives it a cleaner look. This look at the end...you could see the areas with low grout that either fell out or crumbled over the years etc
@@jgg204 if u regrout at the end, then the new grout is not protected by the glaze and is now susceptible to mold. If u Re-grouted prior to glazing, the glaze would’ve covered and protected the entire finish from mold.
Too much prep forget that acid crap you should look into a spray or wipe on adhesive it works 10 times better than any etching
tell me the best way to do it?
@@PRO-we6jp the adhesive makes the coating stick permanently