Rotor Riot TANQ Build - Ultra-Durable FPV Drone! w/ Let's Fly RC
HTML-код
- Опубликовано: 4 авг 2024
- Buy the Tanq here:
Frame:
rotorriot.com/products/tanq-5...
Pro-Spec:
rotorriot.com/products/tanq-p...
Solder-free:
rotorriot.com/products/tanq-5...
Buy Let's Fly RC's new solder free motors here:
rotorriot.com/products/hypetr...
Buy Let's Fly RC's solder on motors here:
rotorriot.com/products/2306?_...
3d Printable Files:
www.thingiverse.com/thing:565...
Dump File For BetaFlight:
master
set gyro_hardware_lpf = OPTION_2
set gyro_lpf1_static_hz = 0
set gyro_lpf2_type = PT2
set gyro_lpf2_static_hz = 135
set dyn_notch_count = 1
set dyn_notch_q = 500
set gyro_lpf1_dyn_min_hz = 0
set gyro_lpf1_dyn_max_hz = 0
set dshot_idle_value = 200
set dshot_bidir = ON
set motor_pwm_protocol = DSHOT300
set small_angle = 180
set simplified_gyro_filter = OFF
set osd_units = IMPERIAL
set osd_warn_rssi = ON
set osd_vbat_pos = 14816
set osd_rssi_pos = 14842
set osd_link_quality_pos = 472
set osd_flymode_pos = 14797
set osd_ah_sbar_pos = 270
set osd_ah_pos = 2190
set osd_current_pos = 386
set osd_craft_name_pos = 14346
set osd_warnings_pos = 14824
set osd_stick_overlay_left_pos = 224
set osd_stick_overlay_right_pos = 245
profile 0
profile 0
set anti_gravity_gain = 7000
set p_pitch = 56
set i_pitch = 60
set d_pitch = 40
set f_pitch = 134
set p_roll = 53
set i_roll = 57
set d_roll = 35
set f_roll = 129
set p_yaw = 53
set i_yaw = 57
set f_yaw = 129
set d_min_roll = 35
set d_min_pitch = 40
set dyn_idle_min_rpm = 25
set simplified_master_multiplier = 120
set simplified_i_gain = 60
set simplified_dmax_gain = 0
set simplified_feedforward_gain = 90
0:00 Intro
1:48 Parts Overview
5:22 Frame Assembly
8:28 VTX / Antennas / Receiver
23:35 Camera Mounting
25:27 ESC / FC Stack
36:54 Motors / LEDs
46:06 Frame Assembly cont.
47:49 Betaflight
59:03 Binding Receiver
1:02:25 Final Frame Assembly
1:04:45 Accessories / Props
1:08:00 Outro
#FPVFREESTYLE
- - - - - - - - - -
- FPV Freestyle Pilots / Hosts -
Joshua Bardwell [Knowitall]
/ joshuabardwell
Drew Camden [Le Drib]
/ ledribfpv
Corey Tapp [CRICKET FPV]
/ cricketfpv
Jeff Orta [VORT3X]
/ vort3xfpv
Alex Vanover [CaptainVanover]
/ @captainvanover
James Hester [PDEVX]
/ pdevx
Paul Nurkkala [NURK FPV]
/ nurkfpv
Shawn Morrison [Let's Fly RC]
/ letsflyrc
Caleb Wright [BubbyFPV]
/ bubbyfpv
- Production Team -
Drew Camden - Producer
Brennan Thompson - Camera / Editor
Christian Kapper - Editor
MUSIC BY
VORT3X
/ oddbot
/ @vort3xfpv
www.rotorriot.com/?aff=1 
Развлечения
Improvement Idea:
During the milling of the aluminium cage you could add some markings on the cage for the cam angle.
Markings from -10° to 60° - long marking for the 10ers, short marking for the 5ers
That's a sweet idea. I wonder if I could laser them myself...🤔
Its so irritating when there's no antenna protection, no room for a strap, and TPU-only arm protectors that grind off in 10 seconds. You addressed all of those things, awesome design dude 👍
Thank for sharing the tune for this setup. Just built mine this weekend and it flys amazing!
This frame looks amazing and is perfect for the new 03 air unit. Hopefully it comes back in stock soon. Thank you. Love ur work my friend 👍👍
Lots of good build tips for any frame/setup in here. Well done!
Update! so i got this frame and love it. wish it had mounting holes in rear for normal VTX instead of DJI crap but i understand. i did put a 20x20 stack in it by using a adapter plate. i am flying it in 3D like ZOE FPV and using bi blades and i must say it is one of the best handling quads i have ever flown. i Don't think i will ever fly another frame but this one. it fits all my needs. Brother you did an amazing job with this one. Thank you very much. For anyone thinking about getting this frame , think no more and just get it. You will be a very happy camper!
I’m going with an entirely different configuration, but this was incredibly helpful getting orientated for my first build. Thank you so much!
Awesome build vid. I learned a lot about building in general (glad to know I am not crazy for liking 1000uf caps on my builds and especially how you just drove through the betaflight setup so quickly without seeming rushed. Great content.
The addition of an exploded view of this frame would make assembly way easier than trying to comb through a video. Thanks
Just finished building mine yesterday and i LOVE it. My DIY kit was missing some of the 3d printed parts (ESC/FC spacers, foot protectors, and a few 3d parts that i believe were for a different VTX setup than what i ordered), but luckily i have a 3d printer and was able to re-create them on my own. i also made a custom mount for the DJI 03 VTX that holds the O3 VTX and the radiomaster ExpressLRS reciever that came wired to my flight controller, that i think works amazing. there is a VTX mount on thingiverse that you can print, but it doesnt let the air unit breathe at all, so i would think it would be much easier to overheat. Mine also has space for the SD card and USBC port to be easily accessed, which is something i have seen alot of people complain about with the O3 not having mounting holes, and having to tape over these areas. Im also working on a custom camera mount that will allow for a 20mm x 20mm piece of plexiglass to be inserted infront of the O3 camera. (i crashed and a piece of dirt/rock was kicked up into the camera leaving a small scratch, so hopefully the new mount will allow you to just swap a 50 cent piece of plexiglass instead of getting a new camera)
Lets Fly RC: Id love to connect with you and share my 3d prints for your quad, i have a lot of ideas for this thing. im also a mechanical engineer so i can contribute effectively to design challenges/mods.
Thanks for making this frame man, i absolutely love it.
Great build video Shawn! Love the TANQ!
ThanQs David. :)
Shawn! Bravo on some of these very thoughtful design considerations! Maybe one day I'll be able to get back into the field again and fly one. Miss flying with folks in Orlando. Been too long....
ThanQs Curtis. Yeah. Definitely miss hanging with the old crew
Great build! Definitely made me re-think my next one 😁👌
Best looking RR drone right now!
WOW super awesome and informative build, cant wait to build mine!
this is the most sincere rotor riot video i have ever seen
ThanQs Yand. That means a lot. :)
Love the color combo and the 8mm arms!!! Great minds think alike. That is definitely gonna be my next frame. I don't care about weight because i never fly with a go pro. I fly for me and me only. I got ride along goggles if someone actually goes with me.
Nice Job!
Just Amazing! It would be nice to see this available to buy in AU. Imagine a Micro 3" TanQ what could do!
Great video Shawn!
ThanQs Rick
Excellent !
I love that!
ThanQs Philippe
Just ordered mine yesterday I can’t wait 😜
Mine is out for delivery by USPS now! Can't wait to start my build!
Man that’s one pretty quad
After 6 months, still in love. My geprc mk5 is also a gem, but the lowe weight that supose to make it fly better..I think they feel the same. So the Tanq is what gets flown❤
What do you think about this frame for 8s?
@@dan71559 it would be a monster
Keep up the great work
thanQs Lil Wicked
Well I just got mine and built it soon has it arrived to the uk :) its awesome build quality and went together really nice . I fly bando only lets see how it holds up it should be fine be the looks of it . Only thing I changed was stack screws to 22mm to space my flight controller away from the esc a bit more so the esc cable doesn't rub :) .
"More time Flying and less time repairing." - I'm sold.
Awesome frame Brah! 🤘🏻👊🏻💪🏻
ThanQs Flyzone
Passando pra prestigiar aquele super Like Tmj
Very cool, wish I knew my way around the electronics like you do.
ThanQs, Pete. It comes with time. :)
Watch a ton of build videos and you will catch on.
@@LetsFlyRC will do!!
Man, I thought the CL-1 was a tank! This thing is thick!!
You and Drew are the shit. Love your laid back personality and easy explanations. I will be investing in your frame for bando bashing. You didn't steer me wrong when you said the skyeliner was a tank. Im betting this frame is even more rigid than the skyeliner. I like the arm ends and how ridiculously thicc those arms are hahaha...I wish this project well man. Hope you move lots of units. Thanks for being genuine. Be easy bruh
ThanQs Flyin Eye. Yessssssss thiccccccc. 😂
Will the custom cable for the T-Motor FC to Walksnail work with the O3? I have that FC and the O3 and I'm wondering if I could use that cable, thanks
"hugging" as in hugging those branches 😉
🔥🔥🔥
Autonomous buzzer is a must, I'd say
Great build video! Could I get away with using a 50A ESC on this build? The Rotor Riot site states 55A but it seems 50A would be OK?
I have a sky liner mk3 but I definitely want this one as well, is there a good 2 blade prop? seems like the ethix pb&j props are too long.
Sean, do this again but move the arms towards the front of the quad instead of down to reduce the width of the quad. You could use servos on the arms. Would be pretty cool.
Hey Shawn, awesome frame man! Do you guys make a GoPro mount for this frame?
Just ordered mine Saturday was wondering I am new this will be my first real drone… could I use a 3s if I find the 6s to be to fast for me? Thanks in advance
My 5 inch frame has white and I'm changing it to purple and green thanks I wanted to see what it looks like when it's together 👍
Mine just came in the mail! I have no idea what I’m doing.
Edit: is there like a diagram or anything?
Double edit: it slips together real easy once you figure it out. Cool design.
Just bought this from the RTF kit. Do the PIDs have your tuning out of the box?
@Lets Fly RC Heat shrink your capacitor leads, they're near the frame and could make contact in a crash..
Great tip. I have not needed it, yet, because the capacitor is zip tied in place. But, I should have mentioned that in the video for others.
My Tanq frame arrived today, already assembling it. I went for O3 and bought O3 conversion kit but to be honest I am missing some closer info how it suppose to be mounted - especially the smallest two parts in the conversion package, what are they? Are they complementary stands for the antenna mount, it has the same cut angle...byt why not to have it as one piece? BTW why DSHOT300 and not DSHOT600? And lastly I did not buy those TPU motor spacers, since I did not find them on RR website!...I guess my best option now is to grind 1mm off of each of those 16! screws...Why do you not sell the spacers?? Thanks.
Really cool frame, Shawn! I know you're not particularly worried about weight, and I remember you talking about saving weight in other areas than the frame in your other video, but just curious what is the auw of your completed DJI rig? And what size lipo do you fly with?
Sorry if you mentioned it in the video, I'm at work in the bush, and I can't stream the entire thing right now..
Cheers! ✌️
I didn’t weigh the fully built dji build, but, my walksnail build auw is 744g
@@LetsFlyRC Sweet, I appreciate the reply. That's not unreasonable. Congrats on the new frame...personally, I think it's the best in the Rotor Riot lineup now. 👏👏👏
I just bought your 3D prints for 03 camera mount. Any install instructions? Seems to be all friction fit.
hi pal is there a reason you use dshot300 and 3.2 pid loop?
I have a DJI fpv but trying to get into real fpv please let me know where you list your quads if you decide to I’ve had a bunch of DJI drones but just got this fpv and I’m in love with the goggle life
How heavy is the AUW ? The whole quad looks beefy !
Wow, are you seariously using super capacitors? A 1000 farad one? Where do you even get ones so small and able to take 6s voltage? I thought normal electrolytic and ceramic ones are better for voltage smoothing..
SuuuuuuupernDuuuuuuper Caps, actually. I formulate them myself in my mad scientist lab. 😂
What about the new O3 air unit?
Yea would like to know too
A 1000 F capacitor is probably larger than the drone itself :p
How do you install the DJI 03 Air unite into the tanq
which frame can you use the dji 03 on?
I love my Tanq. I want to change it to walksnail,but im not inclined enough to do it on my own. I bought the analog version before I entered the walksnail world
What do you think about this frame for 8s?
where do you get the led lights from? anyone have a link?
Hi! Which .stl file are those antenna mounts? I can't find them on Thingiverse. Thanks!
What was your decision to go for the Walksnail System over the DJI system? I'm really curious about your reasoning since i'm torn between the 2 :).
Nobody believes me, and everyone says I am a shill, but, I honestly have better range and penetration with WalkSnail in every environment.
As long as you use the correct antennas on both goggles and drone, the WalkSnail system goes the distance.
I also love the goggles.
I stick with it because it performs the best for me.
I have all systems,
Dji, hdzero, walksnail, analog, dji O3
and I go back and forth, but, lately, I keep going back to WalkSnail.
@@LetsFlyRC Speaking of antenna where we're you able to pick up those OCP antenna, thanks ShawnG
Building a similar drone with the same frame. This is also my first build and I am having difficulty finding cameras that will fit this frame. Does anyone have a few options? Also if there is any printable parts for installing a Foxeer razer mini 1200TVL?
Is it this one that bardwell throttled into the ground to mesure g force
What do you think about this frame for 8s?
What about the new O3O??
Unfortunately, I didn’t have one when this build was recorded.
It will fit, though. No problem
03 compatible? About to switch everything over on frames that can adapt well. Camera mount is my only concern
I have exactly the same question... :)
Yes, it does fit the O3 system without issue. It will show the frame a bit on the sides unless you print a custom 3d print that pushes the camera forward more, but, that unfortunately takes away a lot of camera protection.
I am working on a solution.
@@LetsFlyRC Just built this with the 03....It fits, but the camera is extremely tight in the mounts. Wasn't sure if any solution may provide for a little more room between the mounts. Feels like they could be shaved down a hair.
@@greaterbostoncriminaldefense yes. It is very tight - it was optimized for 19mm wide cam - dji is 20mm.
I have a new mount for the o3 on my thingiverse page that u can print that keeps the frame out of view.
Or my buddy, Julian over at noozle3d can print one for you.
It will be added to the rr store as soon as they finish being printed.
@@LetsFlyRC Just got and installed the O3 mount from Noozle3D. It fits and works perfectly. Took the cage completely out of view. At first I wasn't sure how to install, as it didn't have screw holes, but the way you have set this up works even better. Just took me a minute to figure it out. Works great!! Thank you.
Nice when's the flight video?
It is on my channel. :)
Was on the fence about it then Rotor Riot hit me with the $60 off and yea just got it.
What's the AUW?
Can we get a tank 3.5?
Any way to buy a kit that has everything included rather than buying all the parts separately? Let me know. See I custom build computers but now y’all are getting me interested in building drones. Let me know if costs. Thanks & Happy Flying….
does this frame support the O3 Air Unit?
Yes
Is this a 4S or 6S drone? or is it compatible with both?
Both. Motors make the most difference for battery voltage
Please release the dead cat arms. I’m waiting to make the purchase for my o3
Unfortunately, it will be a few weeks. 😢
@@LetsFlyRC ok cool thx. I’m definitely grabbing one
I just 3D printed a drone last night 9 hour but it turned out bad 👎 all though the file I bought off cults 3d looked good it's just horrible. Do you know how I can get a good 3d printable frame file?
Is this like a re-release of this video? Haven't we seen this frame already?
I made the “talking head video” on my channel. Glad you got to see both. :) this is the build video to help people succeed in building it the way I do.
The pink chrome homepage😅
I NEED A TANK FRAME SO BAD....IWILL NOT REST UNTILL......BEST FRAME EVER!!!!!
What is your AUW?
My auw with all my crazy tpu and heavy hero11mini and 1300 6S battery is 838, but, you could build it without all the bulk and no action cam and get auw of 584
GoPro's rear screen will break if hit from the front. LiPo's edge will crush it.
Not with my mount. (I mean, it will eventually) I have been redesigning GoPro mounts for years trying to protect as much as possible.
This mount has done the best job so far at keeping them from breaking.
Is this compatible with the DJI Googles V2?
Yes with the vista, and it is also compatible with the O3 air unit and the Goggles2
I thought that you were supposed to have the props turn away from your fpv camera, so you bounced off of things and don't spray grass and rocks into your camera
The arm thickness war is getting kinda ridiculous! 8mm geez!
When will the 3D parts be available?
They are all on thingyverse on my page, and they are being added to the RR store a little at a time as they print them and add the listings.
@@LetsFlyRC awesome!! Thanks for the update!
Why not design a simple antenna and wire case for the receiver so you can mount it safely and securely on the bottom of the drone vs under the electronics so you get a better transmission signal.
SHAWN YOU ARE AN EINSTEIN.... YOU THINK OF EVERYTHING... CAN'T WAIT TO GET YOUR TANQ!!!!
Is your shirt available is the RR store? Lol jw.
I need one of those, don’t I? 😂
@@LetsFlyRC i definitely need one 😅
Dear Editor Guy!
The said soldering iron temperatures was in Celsius, when Let's Fly RC said :P
Yeah. That was my fault. Sorry
I prefer to hit things lol
Harry said the same thing early in the comments. 😂
Wonder what's gonna happen with RR now that Rcat is selling them
Hopefully, it means RR will have more money invested to allow us to to more cool stuff. :)
What is the name of frame??
I wonder
just make an 8s cinewoop at this point (jk) this was crazy
o3?
What´s the AUW?
744g without all the crazy tpu I use and with a 1300mah 6S battery and a hero 9 gopro
584 gram’s without gopro
Check out my release video and I justify my design choices. Including weight, which isn’t unreasonable.
m.ruclips.net/video/O-RneeoJmYs/видео.html&mibextid=Zxz2cZ
@@LetsFlyRC Very cool, thx for the detailed answer! Those GoPros are so crazy heavy, damn! Frame looks really great though!:)
Why not GoPro 11 Mini?
I didn’t have it yet when I filmed this.
If you look up my video on my channel, I have the 11mini in that video.
Shawn can you create a violet colour chin spoiler thingy please and send to Julian. In petg if possible please 🙏
Better to have a washer on the bolt to the camera to spread out the pressure. Just saying dude.
You mean the fpv camera? Never needed a washer in 3 years of flying this same soft mounted camera design in the skyeliner. It never even moved, slipped, wore out, or lost its angle.
🎉🎉🎉🎉 I ordered 3 in 03 lettssßssssss gooooooooo 🎉😂😂🎉😅 TANQ4DAWIN
8mm ARMS! 😆
As much as I want to like this frame, I cannot. It will not fit the 1w hdzero vtx unless I run individual esc's or a 20x20 fc in the rear. It would've been my daily if it was a dual 30x30 mount. As you said, why skimp on the lightest part of the build? Add a little more in the rear for that hdzero 1w, and you will open yourself up to a lot more pilots. That's because there are not many frames of this caliber that can fit the 1w vtx.