Dil jit liya bhai tune... ajtak kisi youtuber ko ye nahi bola... bhai tu genious hai genious carry on bro...u r very creative my friend.. luv u bhai! carry on👍
Very nice project. However I'm having problem. I'm using SG90 Servo and it doesn't move. Does it matter if I use SG90 or MG90S? I tried using MG955 but servo doesn't work too. Also, is it normal for the DVD motor to get hot? I'm using 5 Volts and 600mA adaptor. Any help will be greatly appreciated.
Creativity Buzz You Are Great Bro . I Watched Your Channel's Only One Video And I Am In Love With Your Videos . Your Brain Too Good . Keep Your Amazing Videos Uploading .
::::::: Want To Buy Writing Machine For Your School or Science Project ? :::::: Watch Below video to Buy New Writing Machine or Parts From me. ruclips.net/video/w1urQnTpvn0/видео.html WhatsApp on 7698915121 to place order of above link writing machine.
Hello Excuse me, I did everything right by training, I tested the motors and installed it on the board. The sero-motor is healthy But the one who wants to do it does not move left and right. The seromuter does not move. The problem is where I tested the 12 volt adapter 1 amps and 5 volts of 2 amps. Both of these would result.
download the benbox and install it on ur pc/laptop, then connect the arduino board select correct port and then open benbox , follow the steps as per instructions by creativity buzz
hey sai. good u ve built it, okay, what power supp r u using ? use only 5v dc to power up the shield and it works fine, and if stll ur motors getting hot just trim the pots on driver,pot is a silver tiny part with +mark for screwdriver in the center and round shaped,hardly 5mm in dia. if u reduce the current motors wont get hot.
Homework machine: Subscribe creativity buzz
English teacher:
Do we need to go over grammar again?
Dil jit liya bhai tune... ajtak kisi youtuber ko ye nahi bola... bhai tu genious hai genious carry on bro...u r very creative my friend.. luv u bhai! carry on👍
Wow, i just built it in 1 hour. And it worked. Its very useful machine.
Sabin Khadka how much cost u get and how to command it
Awesome mannn✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻👌👌👌👌👌👌👌
Thanks for the tutorial... I actually wrote this comment with the writing machine 😳
Writing machine works on phone
😂😂😂
suree buddy sure
Genius creature world's genius youtuber...
These days HOT GLUE is what was DUCT TAPE in my time :)
Great video and one of the best ideas I’ve ever seen on the RUclips
Then you don't saw the guy who had the idea to jump into a cactus
Fantastic invention!!!
My teacher gave me an imposition of solving a question paper 10 times. Then this popped up.😂
Your work is awesome
Very Useful !
Eeflyyhhhtfcbgc
Tech Fusion I
alok shah
Prem
This guy is highly talented 👍
And how you order the machine what to write??!!!
By giving input to the Arduino such as type word on special software as we programming it.
@@tsukumogoheI How do we give it the font?
Amazing! Now I need to find a second old DVR...
This is really impressive. Great work man
+Lank Asif thanks bro.... Please share more and more
Creativity Buzz how do i use it to write?? My gmail is omkarkhamkar27@gmail.com
@@CreativityBuzz plz help me plz I need to make it urgent for my science project my no. Is 8219748604 plz help me
Where is the Arduino program bro???
video with giving explanation is better than music
Very nice project. However I'm having problem. I'm using SG90 Servo and it doesn't move. Does it matter if I use SG90 or MG90S? I tried using MG955 but servo doesn't work too. Also, is it normal for the DVD motor to get hot? I'm using 5 Volts and 600mA adaptor. Any help will be greatly appreciated.
Man..5 years went by
same here it gets hot and the arduino burns
This is much complicated than my homework
Worth it
good day Creativity Buzz,can we use this a reference for our own typing machine?? thanks
Creativity Buzz You Are Great Bro . I Watched Your Channel's Only One Video And I Am In Love With Your Videos . Your Brain Too Good . Keep Your Amazing Videos Uploading .
At 1:06 I could'nt understand from where you got that part
That's fantastic, congratulations!
Красавчик, руки из нужного места!
ruclips.net/video/dkvAgcTSpVQ/видео.html
What a genious sir you are.
::::::: Want To Buy Writing Machine For Your School or Science Project ? ::::::
Watch Below video to Buy New Writing Machine or Parts From me.
ruclips.net/video/w1urQnTpvn0/видео.html
WhatsApp on 7698915121 to place order of above link writing machine.
Creativity Buzz nitishbehera321@gmail.com. Plz message me soon I will send the pics and connection (zoom picture)of the cnc machine through email
Creativity Buzz how to command it
Can you want to sell this
Hello.. Sir kya aap mere liye ek project p kaam krr skte hai?
Creativity Buzz.. Yes can i know your number because i want discuss properly....
I didn't understand a bit of what he did...haha...but...it's amazing...
When you realize doing your homework is much easier than this.
muzammil butt sahi bola bhai..
Agar friends ka homework karna ho toh yeh machine chahiye 🙆
I disagree
When you make this and then realise you have to do your homework for this to work
take a look at this ruclips.net/video/GP35KY6vmrY/видео.html
Thank you very much 😊😊
I have a question:How does the device can understood what I need/going to write??
You have to write the code through Arduino
@@arbazali8232 what code??
very funny creative project. thanks to you for giving us courage for doing good projects.
I made this hardware but not understanding how to programme and use ben box software. Plz make video on that .. You r awesome . Its wonderful 😍
+sagar please Provide your mail
hllong555@gmail.com
please send to me code thanks
i search the principal code for arduino
Creativity Buzz sagarganji678@outlook. com
I asked Creativity Buzz_ he sent me nothing
U are so talented bro
how to give command to the machine what to write?
Nalepogula Nikhilkumar
@jessica very good sense of humour
Nalepogula Nikhilkumar same question
Jarvis ??
That's program
Would be awesome to make this for school
Can I buy this machine
Hello
Excuse me, I did everything right by training, I tested the motors and installed it on the board.
The sero-motor is healthy
But the one who wants to do it does not move left and right.
The seromuter does not move. The problem is where I tested the 12 volt adapter 1 amps and 5 volts of 2 amps. Both of these would result.
Hey ! This is really Wonderfull Machine , Now you have made this Machine Can You sell it to Me ???
😂😂😂
Ye bikhari khridenge ab....
Tum gola barood khrido... Terrorism hi best h tum logo ka...
Sure, i'll tell you when you text in to my email: mike.aozora@gmail.com
Shivam Shrivastava i ve this mc ready with me just last wk constructed.. if u want u can contact me
avinash khetmali i want what is price
What about programming of arduino or we have to just use "Ben box"
Reply fast plz
Bhai Jordar jalsha padi gaya
yash joshi
Koi gujarati nai samje bhai
Sir, what are the chip like structure you insert in expansion board .did we get those chip when we buy expansion board ??
How to give instructions to this machine what to write
U have to write what the machine writes .... so just write it with ur hand
Computer pe connect hota he and what u writes in computer! It wrote on paper
Pro Gamer same question
hi
Pro Gamer in the description it says software to write is Ben box, just search a tutorial on how to use it
I think I should do my homework by hands. lol. Brillient idea and a machine. Impressive.
After watching this video I feel 😨😱😲.!!!
Very good!!! I just dont understand how you program the device on what it is supposed to write.
Sir, what was the expansection board of the black color that you put
+Shivans Sankalp jumper header
Or it is compulsory
yes they are necesory, since u config the steps this way
Where can i buy them please tell
Where can i buy those please tell
You are brilliant
Bro How to run the machine..
software??
+Vikram Empire ns benbox
Creativity Buzz Bro i Know its benbox i saw it in description...I was asking u how to run the software bro...
Hi guys
Parabéns muito legal. Eu também queria aprender a fazer uma também.
sir i have a complete this machin
but i have not understand
how to use a machin
what this aplication (app)
plz plz plz ans. me
+Gaurav lodha Your Gmail?
lodha seriously
+engineering techniques thanks
+Gurneet Singh Sidhu yes
फब
Are the small pieces that you put In the ardrino board nessesary
Bro,how to use this machine ? Pls reply fast!!
Good question
+kokki kumar download benbox software
Creativity Buzz how to install benbox software on it?
download the benbox and install it on ur pc/laptop, then connect the arduino board select correct port and then open benbox , follow the steps as per instructions by creativity buzz
Very interesting and great idea
I made these project but don't know how to write program to give instructions to this writing machine plz help me with the program
Daksh Patel .
Did it work
oops..........................................................
Thanks!!!!!!!!!
You saved us from homework 👍👍
I want 2 make, Can u help me please
+Sai Kamble yes please fill free to say your questions
I want u r source code
Please give me source code
My all assembly is over
I have attached x-axis,y-axis both motor but they r getting heat
hey sai. good u ve built it, okay, what power supp r u using ? use only 5v dc to power up the shield and it works fine, and if stll ur motors getting hot just trim the pots on driver,pot is a silver tiny part with +mark for screwdriver in the center and round shaped,hardly 5mm in dia. if u reduce the current motors wont get hot.
what type of wood you use for this project, can we use cardboard for this project sir
#questionWhat are those small pieces u have inserted on the CNC shield..
The video needs more explanation. I hope I could find a better simpler video
you are very good.
U r a genius my friend
where is arduino program ?
Very nice bro I will try it
Should be titled how to make a vintage plotter. Duh!
LOL
Excellent job
good work bro!
kepp it up!😀
nice very good i will try to make it
Sir how program these gadget😊
Akansha Bisht ruclips.net/video/dkvAgcTSpVQ/видео.html
ruclips.net/video/dkvAgcTSpVQ/видео.html
Owsm Bro Keep It Up 😊😊😊😊
4:36 Me after 30 mins of kisses only
Vrry intelligent 💡idea 😮😮😮😮😮
Machine ko kaisa pata chalega ki humein kya likhna hai. Like dabao
Beta software naam ki cheese bhi hai ...🐴🐴🐴🐴🐴
Thank you you are a god
No natraj pen was harmed in this video😂
Awesome! I need one of these!
nice project bro thanks for sharing
Tell me one thing whether it requires programming typing or just using that laser engraver?
Ap ne ye buhat acha banaya hai plz mujhe is ki buhat zaroorat hai ap mujhe bech denge
+cried videos your contact number?
Nice sountrack!
I made this one very use ful
its really awesome...........
Sir you have so many machines please give one
Very very nice sir
I am interesting your machine make
Servo jo given hai wohi lene hogi kya ya sevo sg 90 blue wali bhi chalegi
whats the name of the connectors used to connect the 3 pins together under the drivers
your explanation and way of presentation is very nice
so i want to make it at my home so can u please help me in this
+CHERRY EXPERIMENTS yes of course
great work!!!!!!!!!!!!! thanks for the code
Great job
Amazing dude
Nice 👍👍😘✍️✍️
Sir can we use jumpers instead of header pins
Can we do 2-3page work from this machine
Hai bro your really great to make this innovation actually i want this machine could u sell it for me
Hlo brother you are make a good project
I need this to make this machine do my homework >:3
what is the name of the tool and where to buy?
What did you connect to Expansion board at 5:18?
Finally something that can do my h.w.
What did you put in the cnc machine first small bits??
I am a machanical engineer this is easy but i have simple trick
Same like drawing maker on wood 🤗
Best project of homemade
Yes