ULTIMATE Brake Caliper Refinish DIY - Making old parts look brand new!
HTML-код
- Опубликовано: 30 сен 2024
- BRAKE SYSTEM - full refresh, caliper rebuild & paint, rotors, pads, lines, fluid, and more. Can't believe how nice these turned out for a DIY at home job! If I can do it, so can you!
Rennline brake parts here:
www.rennline.c...
Hawk HPS Brake Pads: amzn.to/42nzDJf
Caliper Stickers:
www.etsy.com/l...
Caliper Rebuild Kit:
girodisc.com/f...
My Porsche and other merch: www.boostedape...
Instagram - / matt13ross
Early access to videos and other perks below:
Channel Perks: / @matt13ross
Patreon - / boostedapex
New DJI Camera: amzn.to/4aUakSR
Common tools I use: This site contains affiliate links for which I may be compensated
Quick Jacks: amzn.to/36gkqBc ebay.us/2rUBfi
Milwaukee 3/8" High Speed Ratchet: amzn.to/3zo9NqC ebay.us/KR0raE
Milwaukee 3/8" Impact: amzn.to/3GaiYyT ebay.us/DhzBdX
Retractable Wall Pressure Washer: amzn.to/473zfl9
Pro Model Wall Pressure Washer: amzn.to/44TZIjc ebay.us/5kMpux
Red Spray Bottle: amzn.to/3DbqszB ebay.us/5xbQoa
Air Hose Reel: amzn.to/44A3kHm ebay.us/bMhFu0
Extension Cord Reel: amzn.to/3o4SyZ3
Jack stand wall mounts: amzn.to/3tWDOi7
Triple square sockets: amzn.to/47zBdsZ
Garage Upgrades:
Noco Genius Battery Tender: amzn.to/3zOCoFY ebay.us/lZJCxy
Battery Tender Wiring Harness: amzn.to/3UncTVL ebay.us/276IRz
Extension Cord Reel: amzn.to/3o4SyZ3
Air Hose Reel: amzn.to/448ZNQp ebay.us/bMhFu0
LED Ceiling Lights (set of 6): amzn.to/36m00GP
LED Cabinet Lights (set of 3): amzn.to/3irLWhg
Wall Cabinets: amzn.to/2TwigqJ
Wall Mount Power Tool Rack: amzn.to/3dNLHvc
Camera Gear:
DJI Osmo Pocket 3: amzn.to/4aUakSR
DJI Mini 3 Pro: amzn.to/3Qz39Yq
Canon 250D SL3: amzn.to/2L477Jm ebay.us/vdqXH0
Sigma 18-35MM lens: amzn.to/3cSM1uY ebay.us/pjLbAT
DJI Ronin Gimbal: amzn.to/3zwyJff ebay.us/ppnxfj
Matt, I didn’t see but you NEED to clean the mounting services of the calipers to the hub. Zero paint is allowed there!! I will and can cause shimmy’s
This is a must 👍
100% right. Wish you had done Poorshe stickers
Good catch!!!
Hahaha Poorsche. Didn't know that about the paint guys. Thanks!
@@matt13rosswe are here to keep you straight 😜 and shimmy free
A good way to get all 4 caliper pistons to pop when you are using air is to put a block of wood between the pistons and then they will come out but not all the way the block of wood will stop them from coming all the way out.
I sort of figured that out later lol
good job!! i concur,..."poorsche" would be *THE BEST*!! as for the stache,....idk, the 70's called in and voted for while the 80's claimed foul, so,....
A good tip for keeping paint out of threads - the cheap 3M yellow foam ear plugs do a perfect job for filling the hole during paint and can be removed easily afterwards
Coat the hubs in anti seize before installing rotors and on the top hats to keep the wheels from adhering, put it on wheel studs too. And you gotta clean the paint off for the underside of those caliper mounts! Just put a little anti seize on that surface.
You’re such a tease Matt 😀 I was so happy to see the stache gone and then the sad news it lives on. Come on guys, hit that like so we can say goodbye to the attaché forever 😊
Haha. Yup we need more likes! I have to stick with what I said.
Never apologize for your facial hair, dude. Stay the course.
Use copper grease behind the hub it'll stop the rust
I thought i saw tom selleck doing porsche
Right before you wore wheeled the hubs I was shaking my head that you hadn’t hahaha
Me too lol
Hahaha I knew it
Dude, what’s with the moustache?
If you do any kind of serious track days, those dust seals will be gone in short order. Not the end of the world, most folks who track don't bother to replace. I believe cup cars don't come with them. Also, those caliper bolts are considered stretch bolts and thus one time use.
Makes sense as this car was tracked.
Use Anti seize for the hubs bro
The picture-in-picture is a real cool touch!
Glad you liked it!
The old rotors look like girodisc to me. Buying the hats and replacement irons is cheaper than buying the whole kit. I'll take them!
Just rebuilt all the rubber, seals and greased the pistons and made a difference on my 996 calipers. Pistons were dry and tough to remove but I got it done. You’re definitely going to like how it feels after
I would recommend abit of copper grease on that hub next time where its in contact with the disc.
Aren't those new rotors directional? It looks like you put them on the wrong side....air should be able to flow into those slots for cooling
I followed the arrows in the packaging
@@matt13ross loving the build and your channel! Keep it up!!
my brake hoses failed and locked up my calipers, collapsed the inner lining of the hose.
I think the same happened here
I think you forgot a lot a spécial tool for Porsche and other..... dynamométriqu k tool for exemple brake calliper 😂
Did you use new caliper bolts?
No
Have my 996TT needing brake caliper labels, thx for showing the way to make it happen.
Nice job. You can get DOT approved stainless braided brake lines. I didn’t notice if you had the stock lines. Just a nice touch, with less give in the pedal.
I upgraded to Rennline
Hi Matt. Great job on the Brakes. Lovely Rotors. That Clearcoat is Brilliant stuff. Keep up the good work bro. 😅🇨🇮
you can get kits of silicon plugs that are perfect for sealing off holes when paintig
Yup, all the other YT'ers I watch use them on their brakes and basically any hole that needs filled while painting.
Next time if I remember
Thank you for the wire wheel, I was so hoping you would do something. Those fantastic rotors onto the rust hub just didn't work
Could be a collapsed break line not letting the fluid return back to the master cylinder
I would love those.
They would be an amazing upgrade for my 987!
Lmk.
Thank you.
Derreck in Seattle.
nice touch with the brakes. White letters would of stand out better but still looks good. shave that stash LOL just kidding
Next time you spray anything 2k, wear a proper mask. That stuff is nasty and will mess you up.
NM, you put one on. 😂
I did! haha
Thank gawd you had a respirator on with that 2k. It is really nasty stuff that requires 24hr observation in hospital if you breathe it in. (Used to work for PPG in the paint lab back in the UK, helping develop paints for BMW).
If those calipers were dirty.. the ones on my Cayenne were dirt themselves. They were *black* (but supposed to be red!)
Renline do a stud kit for the calipers also, i installed them on my 997.2 C2S, saves screwing continually into the alloy hub, and titanium always looks awesome
Brake hoses are swollen, brake fluid is restricted on the return. Oh.. Well thats my guess😊
I think so too
Calipers came out great😮💨👌🏼 trimming up the ends of that stache wasn’t all that bad, I bet that bathroom door is the third right at the end of the hallway 😅😂
Ceramic coat those calipers!!!! Will make future cleaning much easier.
come on guys, wote for goods sake!!
Almost thought he would make an adoph H. moustache..
You should go see AmmoNYC and get her cleaned up and the undercarriage ice blasted
I actually like those rims matt . What’s your plans there ?
Stache gang here to stay!!! 🤣👍🏼
⚒️⚒️⚒️⚒️⚒️👍🏻
Double check there is no brake fluid on the car paint after the fluid sprayed in the air when you took the caliper off at 04:30. Would hate to see the fresh paint have a reaction when its looking so good mate. Calipers and discs look awesome mate, great job.😀
I checked :)
@@matt13ross Nice one mate!
This are giro disc rotors you took off, easily cleaned up and resold.
Great work! Entertaining. May do this in future for my c4s.
😊😊😊
11:50 That's a delicate balance there. Kinda scary. I'd use a better table
I'd be interested in one of the old rotors so I can repaint the center, polish the outside and make a clock out of it.
Matt have you had problems with your channel again - I’ve had to resubscribe again ?? Hope is well and keep up the great work 👍🏻🇬🇧
Nope, not since that one (horrible) time. Thanks!
Ummmm,....have you not considered the effect that brake fluid has on automotive paint? You were pounding on those calipers, with the bleeders wide open and splashing brake fluid all over the place. There is not a chance in hell that I would ever let you work on MY car after seeing this. Best of luck to you.
Lol wiped it off without issue. Relax
I would really have gone with the yellow Porsche colour for the calipers, especially with the grey...red doesn't work for me.
I thought about it. But OEM is red. And there's no other yellow on the car.
You need to get garage floor painted 😮
In the next garage, yes.
can anybody advise if this paint holds up to track days? My rotors are 1000F at end of session and discolors factory paints. lots of “high temp” paints have proven to not hold up.
Best bet would be powder coat. But this stuff is damn tough.
As a fellow OCD sufferer I really enjoy your attention to detail 👍🏻
Keep the great video rolling. What an amazing change from the first car being delivered.
A Like for killing the tashe, brakes were good too.
Your work is inspiring
Recommend a shot of Tay and Travis to drive up female subscriber count....
Haha
Nice work man 😄👌
You're not sneaky. You can't just mirror footage and make me believe you worked on both sides, lol
That's not on purpose lol
Love the channel. Great work. Awesome personality, look forward to your new videos. Keep up the great work !
Thanks so much!!
Every time you talked with the mask on, all I could think about was Kenny from South Park.
Haha
When you were hitting the caliper with a mallet and the brake fluid was shooting up towards the freshly painted fender 😬
Cleaned it, all good!
is this Porsche 997 inside a 991 body? I can't tell but the tail lights don't look 997
Just a standard 997 body!
14:25 I'd do the same with the wire bit, same tools even
matt youre going to want to keep those giro discs hats and get a good high temp brake fluid for when you're doing any serious driving! great series, cheers!
I'm going to keep the track driving for the E36 I think.
If i promise to like your next 3000 videos, will you ditch the stache?
You and everyone else, yes lol.
Covering 90% of the Porsche to get the Rudolf the Rednose reindeer look…Nice 😢
It needs sanded and buffed anyway, no worries!
Good to see the clip of you enjoying yourself doing the doughnuts!
You really are shooting yourself in the foot. I’m not sure whether to like the video which was great or to not like it as I love the stache!
Please like! Lol
Turned out pretty nice! Now get some length on that stache and get them ends curled. 👨🏻
Haha
😅😅😅Fortunately for us we got an early episode as the breaks are shut 👏👏😂😂😂
Finally. The brakes triggered me so much. 😂
Haha same
The picture of the car for the video with the 5 spoke wheels looks good.
I agree
Hydraulic and Paint dont go well together ….. When hammering the Front left calliper Hydraulic sprayed out ……Clean those fenders mate …Top job
Cleaned for sure!
@@matt13ross top Lad… The colour contrast is gonna be epic … Grey and Maroon….
Please shave that moustache, just my opinion, apart from that love the porsche series❤
Didn't get enough likes!
@@matt13ross clever hahh, i wasn t aware that you wanted likes for shaving, I got that later in the video.
Ps I ve got an Audi tt 1.8t quattro, 225hp, what mods should I first strat with in case of power
Oh man. I have no clue about Audis ha
@@matt13ross the other option is sell the TT and buy an E36, in Poland they are getting more expensive, so the clock is ticking
@@matt13ross anyway take care and i hope you ll hit 100k this year at least 🥳
My callipers have heat shilds between the piston and brake pad. they are stock
they kinda slides into the piston and lays flat against the pad
RIP Stache had me laughing hahaha you're a champ
They spelled "Poorche" wrong on those stickers. 😉
Haha
This videos sound track went hard 😤
Hey Matt. Have you checked the brake hoses? If they are old, they can collapse so when you let off the pedal the fluid does not return. May not be the problem but in some cases it can be and most people overlook this issue. Good luck bro.
I didn't check the old ones. They were steel. But I did replace them with new from Rennline.
@@matt13ross good deal. 👍
Gutted to have to see the Dolphins lose again. Great video other than that though. Brake paint job looks ace
Thanks 👍
Looks great. How does the clear coat hold up to the heat of the calipers?
Guess we will see!
I had an older car I restored that the brakes locked up on a short test drive.. it was the brake light switch of all things... it was adjusted too low and didn't allow the brakes to release far enough to let the fluid out. I turned it a half turn out and the brakes popped loose and the car rolled easily. I spent weeks rebuilding everything... Dumb stuff like that makes you insane.
Great Video Matt, thanks for sharing the ride-
👀 that brake oil squirting near fresh paint...
Cleaned!
The look of regret for shaving the stache had me rolling lol! Another great video in the books, 997 is looking amazing!
Thanks so much!
Loving the Ned Flanders’s look
Looks good. She's getting there.
NEED Those WHEELS From The THUMBNAIL!!! 🔥🔥🔥🔥
I like them too haha
Brake fluid on the fresh paint and in the eyes sucks.
It's all good
Moostache’ 😮
Letters are too big, not oem size.Looks off.
I wasn't going to for exactly OEM, I think these look great.
Why didn't you clean the wheel wells tho
Eventually. Have more upgrades in there to do
Are the rotors on the wrong side? I always thought and heard that the directional slots need to face the rear of the car?
m.ruclips.net/video/krLOy90KrvY/видео.html
The slots don't matter. It's the inside vanes that matter.
Wait why glass cleaner on calipers i must not know something 😂
I use it on everything lol
@@matt13ross does it coat it like wax and repel water lol ?!
Hell, just grow a beard..
I did earlier lol
Great work 🫡
Very nice job🔥
Great job bro 🔥🔥
Need to do my brakes too 👌
You didn't strip the paint off the calipers? Or prime them first? Not sure how long your new paint is going to last, particularly if those calipers see any heat, like at the track
No need to strip the paint or primer them. A good cleaning and sanding will work just fine. 2K paint is super durable too.
@@matt13rossall you showed was scuffing them with a scotch brite. What did you sand them with?
That's sanding lol