DIY Truck Bed Tent! Truck Camping

Поделиться
HTML-код
  • Опубликовано: 11 сен 2024

Комментарии • 502

  • @johnminor2496
    @johnminor2496 5 лет назад +127

    I'm 66 years old. It really makes me happy to see two young people having fun together. Great idea for the truck tent. GOD bless you both.

    • @robertgerace2309
      @robertgerace2309 5 лет назад +2

      Great idea like to have thought of it myself. I believe you should have put in a top support rod to make it just a little more water tight. Just a thought but nice job. Bg

    • @stardust_boba9485
      @stardust_boba9485 3 года назад

      Aww

    • @themessiahssecondassembly7761
      @themessiahssecondassembly7761 3 года назад

      I'm 70 and I was just thinking the same thing, just how I would have done it for my family back in the day, gotta take care of the gal. I was a bit of a mr. fixit and semi inventor, used pvc all the time, nice job, great idea, have fun.

    • @budidarmawan3956
      @budidarmawan3956 3 года назад +1

      Iam 55, Salam from Indonesia

    • @themessiahssecondassembly7761
      @themessiahssecondassembly7761 3 года назад

      @@budidarmawan3956 That's nice, welcome to the comments section of this video.

  • @davidshelp7116
    @davidshelp7116 5 лет назад +16

    One of the best. No extra verbiage, no screaming music etc. Well done.

  • @jmrichsonsr
    @jmrichsonsr 5 лет назад +95

    Little things like that were some of the best times of my 82 years. Glad you are recording them. But no telling what you’re gonna play them back on in another 60 years. Enjoy your life. And thank you for sharing.

    • @flyfishing1776
      @flyfishing1776 5 лет назад +3

      You're so right Blessings

    • @to5287
      @to5287 5 лет назад +2

      👑👑👑🇮🇱🥇🥇🥇

    • @dandandy419
      @dandandy419 5 лет назад +1

      hi
      we put a 3/4 sheet of plywood on the floor of our chevy s10
      to level off the ribs of the floor and then our 4 in foam matress

    • @Kube_Dog
      @Kube_Dog 4 года назад

      Thank you for writing like an intelligent adult. Sadly, that puts you in the top .1% nowadays.

    • @lisashea2791
      @lisashea2791 4 года назад

      @@dandandy419 Thanks for that bit of info - I have a '97 chevy s10 and was glad to watch this video.

  • @ANXIETOR
    @ANXIETOR 2 года назад +8

    I’ve done this also. PVC frame plus a tarp on a Ranger pickup. You’ll have to cover the tail end above the tailgate, for sure. A longer tarp in that direction works good because you can stake it out in the daytime like an awning with a couple poles. It’ll give you a sheltered work space on the tailgate for cooking. The tarp clamps can’t hurt, but I bungeed the grommets TIGHT to the bottom edge of the bedsides, and it survived a high wind rainstorm. Also, to bug proof the thing, I bought a few yards of tulle at a fabric store. Just enough to zip tie in place above the tailgate. I have no idea what it’s usually used for, but it’s good enough skeeter netting. Good job. Have fun.

  • @jmpersonal2402
    @jmpersonal2402 18 дней назад

    and I am 72... GREAT idea ... wonderful fun, and may you have lots of adventures. You don't need a lot of money to create fantastic memories...

  • @davidcowton1070
    @davidcowton1070 4 года назад +4

    I think a ridge pole would be a good addition, not only would it stop the apex of the tent collapsing but it makes a good place to hang lanterns etc! Looks nice and sturdy! Hope you have many, many fun trips together!

  • @112477fm
    @112477fm 5 лет назад +5

    Best and easiest idea for truck tent camping looks sturdy and roomy enough for two for a quick weekend camping trip. !I'm really impressed

  • @thisguy2676
    @thisguy2676 5 лет назад +64

    You shoukd replace those 90s at the top with a couple of 3 way couplers and put in a ridge pole. In the rain the center will collapse

    • @dsmith3134
      @dsmith3134 5 лет назад +3

      A brace in the middle would strengthen it as well.

    • @pamm2230
      @pamm2230 4 года назад +8

      When you add the center ridge pole cover the pole with a pool noodle. The noodle will prevent rips as the tarp is over the top with tension and stand up to wind and rain better.

    • @michaelburroughs7494
      @michaelburroughs7494 3 года назад +1

      Definitely need that center ridgepole so water doesn't have a chance to pool.

  • @royramey5659
    @royramey5659 5 лет назад +4

    I made one just like that for the top of my houseboat. I used it in summer so i put bamboo curtains on it and i could roll them up to the peak and have a view of the sky. If it rained i would put a tarp over it. Everybody loved it, it looked tropical.

    • @Kube_Dog
      @Kube_Dog 4 года назад

      Yeah, blow me, dumbass.

  • @krisc6012
    @krisc6012 2 года назад +1

    Sweet! This is exactly what I've been looking to do. I'm a 54 yo female n I wanna go camping alone. About 20 yrs ago this idea to camp alone woulda been no biggie but now that I'm older I consider all the things that could potentially go wrong and what that could mean if alone. I also watch a grip of Dogman stories on YT n I have officially scared myself out of single camping. I'm gonna get my conceal carry permit so I can bring a piece just in case but until I get it this idea of yours might fit the bill for me as far as my comfort being alone goes. I have a 92 toyota 4x4 and being up off the ground will make me feel much safer. I had checked out the prices for overland/truck bed tent systems n they're outrageously priced. I noticed the prices to average in the 5 to 600 range. That's just ridiculous. Thanks to your engineering I think I'm gonna be able to solo camp this summer.

  • @joefish3571
    @joefish3571 5 лет назад +26

    You're very lucky to have a wife that's into you and supports you in your ideas.

    • @Kube_Dog
      @Kube_Dog 4 года назад +2

      Dude, that's his sister...

    • @costmostchannel578
      @costmostchannel578 4 года назад

      that her cousin

    • @Kube_Dog
      @Kube_Dog 4 года назад +1

      @@costmostchannel578 Yeah, his dad had her with his sister. So she's both sister and cousin.

  • @mrlariata9290
    @mrlariata9290 4 года назад +2

    This is why I watch youtube. I love it when folks like this are just making it happen. Love the noodle idea nice little set up. I made something similar back in the day but just super tall and square to walk in. I made the post shorter on one side so water will run off to that end. Love your drawing in the beginning. Awsome make cool video.

  • @artwebb6939
    @artwebb6939 5 лет назад +6

    Definitely one of the better thought out examples of the sort of DIY project I've seen

  • @genius-no5sl
    @genius-no5sl 5 лет назад +12

    I think your a brilliant kid and this is really innovative!

  • @MrBiggreedy
    @MrBiggreedy 5 лет назад +6

    Thats awesome your getting out doing your thing. A few tips from experience. 1) You've got great idea there. Its been done in various styles with varied types of frame work for decades. Right down to the tarp covered wagons of the pioneer's. 2) figure a way to run a ridge pole.3) Using some sort of cordage. Run an X rack from corner to corner. Helps exponentially in heavy winds. I dig your style, great hiking rig!

    • @isabelrubino6266
      @isabelrubino6266 3 года назад

      This is what I was looking for!! Thanks a million😃

  • @michaelphelan106
    @michaelphelan106 5 лет назад +2

    You can get tees with a side outlet for the top/ridge pole. They are used for sprinkler risers at corners. Good project.

  • @toddlehman928
    @toddlehman928 2 года назад +3

    I was originally planning to make my own truck tent until I started looking at some of the ones on the market. The only thing that I really like better about the ones that you can buy is having windows and skylights especially. But this is a great way to get her done on your own brother!

  • @ytmm9055
    @ytmm9055 5 лет назад +19

    nice job just need a pvc support at apex of the frame, running from back widow to tailgate

  • @575conbon
    @575conbon 5 лет назад +10

    I know it's only been a week, but have you gotten to try it out yet? Only thing I could think of is you should be able to get "3-way pvc connectors" that you could use to run another 5' pipe along the very peak of the tent, to really keep the top from caving in at all under any weather conditions.
    The nice thing about using PCV is it's basically a big lego or erector set, you can change it and modify it however you want. I'm thinking you could put T's in your two upper 5' pipes now and use it to run a couple of pieces horizontally from bar to bar. If you did this at the front of the truck bed where you're not going to hit your head on it climbing in, and put two parallel bars spaced about a foot apart, you could put a shelf up there that would be above your pillows to hold your duffel bag or phones or whatever at night so it's not down on the floor where you'll step on it.
    You could also expand it outwards past the tailgate to make a "front porch" area so that you are covered climbing in and out of the truck bed in inclement weather. Also would let you leave the tailgate down to have move "living space" while you're in there.
    Looks good so far though, keep up the good work!

    • @TheCoxClan
      @TheCoxClan  5 лет назад +4

      Holy cow! This is he best feedback ever! I might actually have to try some of those suggestions!
      And as far as using it, we are going this weekend and will post a video about it next Tuesday! 👍
      Thanks again for the great comment!

    • @annwithaplan9766
      @annwithaplan9766 5 лет назад +1

      I was going to suggest the same thing with the top ridge. Anytime you do not have something there, it WILL sink down with rain, snow, branches, birds, etc. : )

    • @patmcgraw5889
      @patmcgraw5889 5 лет назад +1

      I have built hotbed covers for early planting in a similar manner. One other upgrade later is to assemble it then drill holes through the fittings and pipe the use Carter pins or wire to firmly attach the pipe to the fittings. They want pull apart in high wind.

  • @contrabassbob
    @contrabassbob 5 лет назад +6

    Slick! You might consider bungee cords or luggage straps to really tighten up the tarp.

  • @lisagarza3716
    @lisagarza3716 4 года назад +6

    I followed this pattern but had to added a bar to the bottom of the truck bed to secure the legs because i have an insert for my truck bed which covered the holes on the back of the bed. Then i added a center pole to the very top of the A frame and four windows. I am using bungee cords to hold the tarp down. Thanks for the idea.

  • @rosshussey1723
    @rosshussey1723 5 лет назад +3

    I made this identical truck tent. Bought my pc pipe section at Lowe's and purchased a tarp at Harbor Freight. Very inexpensive. Used bunji cords to tighten the tarp to outside of bed. Also designed it with a ridge pole to keep from sagging. Rained the first day and through out the night and absolutely no leaks. The rain hitting the tarp was somewhat disconcerting as it was rather loud. I had power at the camp site and ran an extension cord for my small ceramic heater. With an air mattress and cooler inside I had a comfortable time in the tent/bedcamper. Unfortunately I traded my 8' bed regular size pickup for a crew cab with a 5 1/2' bed.

    • @willmiller7794
      @willmiller7794 2 года назад

      Would be great on an 8' bed but the new Ford Maverick has a 4 1/2' bed. Can anyone say motel? (In the woods?)

  • @sakuragaming3811
    @sakuragaming3811 3 года назад

    TQVM. I think this is the most economical campervan so far and it is worth to try for the beginners like me.

  • @petuniaromania6294
    @petuniaromania6294 2 года назад

    You could even layer the PVC piping with insulating material and clamp or zip tie it down, and then recover with tarps, canvas, or waterproof canvas material, etc. The truck bed can be covered with some type of foam or rubber matting, perhaps underneath that an insulating material of some sort, and actually have a very snug, warm in the Winter, camper. A tiny wood stove could be added if a top build was created to hold and insulate from melt, a stove pipe; the wood stove could be mounted and surrounded with a protective framing device that will keep it in place. So many possibilities here, including ventilation and solar powered fans :) I Love It !!

  • @petermahoney636
    @petermahoney636 5 лет назад

    You can't beat the good old swag an Aussie invention it don't fail

  • @maxportolo2991
    @maxportolo2991 5 лет назад +2

    Those tires are SICK!

    • @jasoncox2606
      @jasoncox2606 5 лет назад

      I thought the same thing. Those are sweet!

  • @BlueOvals24
    @BlueOvals24 3 года назад

    Dude you totally reminded me that PVC pipe exists and are like lincoln logs for adults. I was about to buy a purpose built truck bed tent, but that is not necessary now. I'm not much of an A frame guy, so I'll have to design my own version of this, also the previous owner of my truck covered those holes with some stupid caps that I can't remove without damaging it. I'll have to redesign this, but thanks for the inspiration!

  • @backyardbeekeeperguy9934
    @backyardbeekeeperguy9934 2 года назад

    Good job! I will try making me one of these for the bed of my Chevy! Need this for shade when me and my boys go out to sell honey. Thanks for sharing!

  • @vondahartsock-oneil3343
    @vondahartsock-oneil3343 4 года назад +1

    Excellent! Exactly what I'm looking for. I've wasted an entire year looking everywhere from auctions, classified adds, all the online places looking for an affordable tow behind my truck rv or something enclosed yet large enough I can put a couple of cots in there. I don't want to sleep on the ground in my sleeping bag or some blowup bed matress, cause no matter how puncture proof (yet they always come with a patch kit hmmm) I'd still manage to find a way to puncture it. But as one man said, you got a truck, you got a camper. I can't afford a camper shell to fit my truck. Dodge Ram 1500. I had one back when I had a little Isuzu truck, but that was years ago and both are long gone lol. I"m on a poor mans budget. I ride a motorcycle when the weather is good enough, but I want to sell it. I just want to cover the back of my truck, throw a couple of comfy cots and an ice chest or something in there. I never found what I was looking for. Then I just watched a previous vid a guy used pvc. I thought that's the answer. PVC. It's durable, shapeable, you can buy those things you have to give it an "elbow", I mean it's just perfect. The only thing I worried about was the extra space when you insert the pipe into the truck. I thought exactly what you did. OR used. I used those on my canoe. I had no trailer, a small truck at the time. My husband and I could both get the canoe up and in the bed of the truck, but we had to put the front half up on the cab. I went to walmart and bought a couple of those floaty foam things. Cut them to size, then cut from the hole, end to end and it slipped tightly over the crossbars on the canoe, so it didn't rub against the paint. It was perfect. Just like your build is perfect. Thanks for posting and showing off your build. There's TONS of people like ourselves out there, looking for the same thing. If only they find your vid. I can share, but I'm a bit of a loner. Every one I know has passes away before their time. So I wanna take the time I have left with my older husband, and get away without going to get a vacay loan or travel loan. I don't wanna be in debt, not at his age. I'm 51, but he's 70 (I know I know...age diff. thing freaks ppl out. We've been married over 30 yrs. but we never had kids, so I really have no one)
    The problem is, the rear of my truck, did I say what it is....well it's a Dodge Ram 1500 3.1liter. I'm 5 foot 5 inchs and the tailgate up, comes to my chin. That's how high it is lifted. Getting in and out is going to be a problem for him, so I said nope, we can either buy steps or build some. OR we've got a step ladder we can throw in..getting in is easy to figure out, it's what to use and how to build it that's the problem. WELL ITS SOLVED!
    Thanks for posting this. As I told the other person, there's tons of us out here looking for this exact type of thing. Hopefully many others will find your vid. I'd share it, but I've got no one left to share it with. But I can still post it to my FB page I hate and never check lol, but I'm in NE Oklahoma. I'm in hunting, camping fishing country. Everyone has something to do with one of the 3, that and motorcycles. I have one too. lol. Anyways, I"m rambling, but again thank you for sharing. Good luck to you and yours. OH ...and in this day and age, dammit. Stay safe.

  • @jamespatterson1433
    @jamespatterson1433 3 года назад +2

    I was thinking about getting a pickup to camp out with. I was pricing bed shells, man they are pricey. This was a great idea!

  • @briansmobile1
    @briansmobile1 2 года назад +3

    I found you organically. I didn't even know you had a channel. Nice!

    • @TheCoxClan
      @TheCoxClan  2 года назад

      Haha we haven’t posted in FOREVER. Hoping to get back into it soon

  • @peterpiper487
    @peterpiper487 Год назад

    So much better than buying a tent. And much easier to assemble when you're ready to set it up. Great job!

  • @williambeasley2582
    @williambeasley2582 5 лет назад +11

    I like the way things just slide in place. Great idea.

    • @Kube_Dog
      @Kube_Dog 4 года назад

      That's what she said.

    • @jakeblanton6853
      @jakeblanton6853 3 года назад

      They might just slide together, but quite often they are not that easy to slide apart afterwards... Often you need a pipe wrench to twist the pipe in order to get it to loosen up enough that you can slide it apart even if you didn't glue it together... If I was designing something like this, I would sand the ends of the pieces of PVC pipe a bit to reduce their diameter slightly so that they could be more easily detached later...

  • @angelogarciajr5356
    @angelogarciajr5356 3 года назад

    I agree with a top ridge pole too and I am not sold on the tarp clips. It seems the wind will remove that tarp easily with those clips? Maybe some bungees along the lower edges pulling down on the tarp? Maybe even some plastic ties that you can cut off when removing? Great idea. Beats my sleeping under a tonneau cover lol I am just not sold on anything a hungry bear can reach through.

  • @valentinromero1803
    @valentinromero1803 5 лет назад +12

    I like the México jersey bro!!

  • @bradleymendoza0
    @bradleymendoza0 2 года назад

    Me and my friends were talking about wanting to go camping but in our truck beds… can’t wait to do this!!!

  • @dennisclark9882
    @dennisclark9882 2 года назад +1

    I just bought us a Ford F150 4x4 and WAS going to get a truck tent. Thank you not now. I enjoyed your video

  • @rogerlbl7316
    @rogerlbl7316 2 года назад +1

    Cool as hell man! I wonder how much extra I'd need for a 8ft box 🤔

  • @RWAllen-jx8gi
    @RWAllen-jx8gi 5 лет назад +1

    You might have more PVC than I do in mine, but I can fit it all into a Lawn Chair bag. I might have to "modify" mine now. It could use some additional support. Good video...

  • @bobbyprice8602
    @bobbyprice8602 5 лет назад +1

    Cool idea I actually have a travel trailer going to give this a try for times I don't want to fool with the camper.

  • @MsGorteck
    @MsGorteck Год назад

    This was really well done. You kept it simple. You did not talk for the sake of hearing your voice. You kept it short and yet managed to fit all the important information in. Your presentation was made in a nice order and I don't think anyone would be confused. By the way your drawing was just fine and WAS not bad, it was simple but not bad.
    A couple of thoughts. You did not show the clamps at all. Neither before you started like you did the pipe and fittings nor at the end showing where and how you had them attached. You might show the frame broken down and in the bag. And, while it should go without saying, I think you should tell viewers to not use glue on the connector pices because that will make take down and storage, more than a bit difficult. Be sure to remind viewers that they will want some air circulation throughout the day and night so they don't suffocate. The Army had this happen a few times while moving troops in duce 'n halfs years ago.
    You and your girl should be proud of yourselves, nice video.

  • @andrewkarppinen4348
    @andrewkarppinen4348 5 лет назад +1

    Looks pretty good. I would change out the fittings at the very top to incorporate another pole from front to back to increase support and use tie outs to the ground to stabilize the tarp.

  • @caaront
    @caaront Год назад

    I have a 5' x 8' utility trailer (with no walls, just the welded rails about a foot up the sides and the tall mesh ramp at the back. I plan to do something very similar with it, but have mosquito netting at the front and rear for airflow, and an electric power bank or small fueled generator for a fan for circulation in the hot Texas weather. Nice video.

  • @LongRangeDesertGroupX
    @LongRangeDesertGroupX 8 месяцев назад

    Great idea! I am planning on doing something like this with my Jeep Gladiator on my next camping trip so I dont have to worry about setting a temp up on the ground.

  • @Sp3shelEdd
    @Sp3shelEdd 5 лет назад +8

    Cool! Love the pool noodle idea. I will probably build this for my tacoma for simple woods/fishing runs too. Thanks for the vid!

  • @slickydicky
    @slickydicky 3 года назад

    I made a square frame back in the winter for my truck. I never thought about the squeeze clamps as a way to secee the trap to the frame, that's brilliant!

  • @marioalvizo1563
    @marioalvizo1563 5 лет назад +24

    Chingona tu playera carnalito 🤙

  • @lil_Marie_Red
    @lil_Marie_Red 2 года назад

    I saw one that did that to trailer. And he took tarp it to a marine upholster and he sewed on a door and window. Really nice.

  • @edwardcnnell2853
    @edwardcnnell2853 4 года назад +3

    How well does it hold up in wind? There is enough surface area to make a strong sail and pull the whole assembly off the truck. I would add a way to anchor it to the truck and a flap to cover the back by the tailgate to keep wind blown rain from entering. Adding light is a great idea. Consider a disco ball.

  • @skywalkerearthbound9591
    @skywalkerearthbound9591 5 лет назад +1

    I like this guy alot his wife is cool as well thanks guys good idea.

  • @dhughesphd
    @dhughesphd 5 лет назад +21

    Are you leaving the front of the "tent" exposed, or have you crafted some sort of weather-proof idea for that side as well?

  • @shannaestevens
    @shannaestevens 2 года назад +1

    Love this project going to make it with my kids! I can't wait to go camp in it!

  • @PAPOOSELAKESURFER
    @PAPOOSELAKESURFER 5 лет назад +9

    Easy to add bug screen across and down the back with the same clamps that hold the tarp.

    • @vondahartsock-oneil3343
      @vondahartsock-oneil3343 4 года назад

      Ya, I went to lowe's and bought vinyl bug screen to re-screen my homes windows and patio door. That stuff is great and sturdy! Any your cat or dog can't put a hole in it, tear it, enlarge any openings etc...(Plus you can see out fine, but you can't see in fine!)

  • @Yelnats101
    @Yelnats101 Год назад

    i had the thought today to do something like this. want to take my dog camping with me but dont want to put her in my $400 tent, this tarp setup you made will be perfect. great job.

  • @jannah4288
    @jannah4288 5 лет назад +5

    My thought is to put a bar across the very top of the A frame so as to not hold the rain water where the tarp will flatten, but make it run right off it completely. Enjoy! 🙂

  • @ChrisDavis-ps8me
    @ChrisDavis-ps8me 3 года назад

    I think I’m gonna try it! Thanks to you and your lovely bride.

  • @stevej6824
    @stevej6824 3 года назад

    Good job, simple and effective.
    I made something very similar for my ‘83 GMC K2500 long bed. I utilized my headache rack for the front but made PVC supports for the middle and rear stake bed holes.
    Covered bed with an inflatable mattress is easier and more comfortable than any tent I’ve had.

  • @garrylund4652
    @garrylund4652 5 лет назад +1

    using those pool things was a good idea! might have to do that to the one that I made

  • @elisafrye2115
    @elisafrye2115 5 лет назад +1

    😁You are a freakin genius! What a super creative approach! I hope you enjoy lots of safe, happy, comfortable miles in your Magic.Tent! 👍💕

  • @erroleabrown4317
    @erroleabrown4317 3 года назад

    Seriously that’s so smart it really is a good solution, but I think the clamps aren’t going to work in the wind, maybe tie the holes in the tarp to the inside middle pipe, great idea tho love how cheap it is, thanks for the video

  • @Leon-lp9fl
    @Leon-lp9fl 5 лет назад +4

    Enjoy your trip,sleep tight, have fun!Turned out well this far.

  • @justatool
    @justatool 4 года назад +1

    I've seen a few different setups, I usually take a little from each and make my own design. I liked the use of the pool noodles, I may incorporate that into my plan!

  • @cyndicox7797
    @cyndicox7797 5 лет назад +2

    So cool! I love the idea of being off of the ground! give me an air mattress and it's perfect!

  • @fishmut
    @fishmut 3 года назад +1

    Love it guys , hope you both are still enjoying the camping world in 2021, take care .

  • @user-yv3pc3jp9z
    @user-yv3pc3jp9z 4 года назад

    Awesome..i think you will saw a tent with mosquito net as well🥰🥰🥰 i love your idea..

  • @jongutmacher1277
    @jongutmacher1277 3 года назад +1

    love it. Great ideas with the clamp vs tie, and the noodle -- but I still think a center top rod would have been smarter on rain issues.

  • @Hector_Ocean
    @Hector_Ocean 2 года назад

    dig the ingenuity and the jersey bro!!!!

  • @jeffb1344
    @jeffb1344 5 лет назад

    Love your innovation..
    Take a length of 3 o 4 inch PVC and notch the ends to correspond with the peak. The length should extend so the notch on each end will engage and stay put. Lash together if needed. Now you have a peak that won't collect a rain puddle...Great, cheap idea! Well done

  • @OldAndGettingOlder
    @OldAndGettingOlder 2 года назад

    Nice. The pool noodle was genius.

  • @joseluismorales572
    @joseluismorales572 5 лет назад +1

    I love your project, but your t-shirt is amazing! Right on sir!!!!

  • @sunilbachan4307
    @sunilbachan4307 3 года назад +1

    This is so cool and inexpensive.. great going guys love it

  • @mohamedly5557
    @mohamedly5557 Год назад

    Simple short informative fun easy. Great content mate

  • @phillipwhiteman3018
    @phillipwhiteman3018 Год назад

    Awesome video! You gave me some great ideas, so thank you! PLEASE put a follow-up on what you changed after a shake-down run. (if you have the time) it would be greatly appreciated.

  • @kikksda1
    @kikksda1 4 года назад

    Awesome idea! I love how simple and effective this is! The bonus is that you can carry it wherever you go.

  • @chriscox7464
    @chriscox7464 5 лет назад +1

    From one Cox to another; that’s a wonderful idea. I’m going to try it out myself and I’ll let you know how it comes out!

    • @Kube_Dog
      @Kube_Dog 4 года назад

      You like cox, do ya? LMFAO!

  • @ryleyw3684
    @ryleyw3684 2 месяца назад

    I had a similar idea for my 2011 ford ranger, cool to see someone make something very similar as a visual, only thing is id want mine completely closed in with a screen, I'd probably be able to rig something up as a custom tarp/covering.

  • @GetReady4LiftOff
    @GetReady4LiftOff 5 лет назад +1

    This is better then tent on ground w animals, dirt & rain.

  • @jennydrumm7223
    @jennydrumm7223 5 лет назад +2

    This is brilliant!! I've been toying with the idea of trying to build a version of a collapsible camper that I saw on a video, but he just has a flat roof. It's made to be put up after you get to camp and then dismantled for the drive home.
    I HATE changing clothes all bent over so I wanted to make a domed or peaked roof to add on top of it, but have been having no luck figuring out how to create and mount it to the camper and yours looks like it could totally be adapted for this!
    EXCELLENT idea with the noodle! That would never, ever have occurred to me!

  • @guzavevic6736
    @guzavevic6736 2 года назад

    Great idea. I love the jersey.

  • @stevenwilliams5459
    @stevenwilliams5459 2 года назад

    Gonna make a similar one for a 2022 ford ranger. Gonna make mine with pvc poles past the tailgate, also gonna try to make it breathable for hot summer days

  • @timburton1715
    @timburton1715 4 года назад

    It needs a peak support to extend out beyond the tailgate like a patio cover... a couple expandable poles out at the corners and support lines to anchor and it should be great 👍

  • @rocks4350
    @rocks4350 3 года назад

    back in the 90's i made something like that,too bad i don't have any pictures.my truck had an 8 foot bed,which gave youmore room,those were the years before 4 door or crew cab trucks.but i liked your idea pretty good,you're a survivor,just keep digging.by the way,your drawings are better than mine,byfar.

  • @drewe9514
    @drewe9514 11 месяцев назад

    Thanks for adding some Cox into my life. Great video

  • @flashtothepast4816
    @flashtothepast4816 4 года назад

    That’s a bad ass Jersey

  • @johnstill3352
    @johnstill3352 5 лет назад +7

    Would definitely use the bigger tarp to have a door

  • @sfahr57
    @sfahr57 5 лет назад +10

    Great job but we used to just bow a piece of PVC from stake hole to stake hole and make a covered wagon type out of it. Only need 3 pieces of PVC and that's it.

    • @henrybittle5234
      @henrybittle5234 5 лет назад +1

      Lol, did the same thing about 10 years ago only I bent um alittle with a torch, works great, still use it sometimes

    • @henrybittle5234
      @henrybittle5234 5 лет назад

      I only used 1 inch, made it like a covered wagon, I did use a top pole from cab to tailgate, lol minutes to set up, I love it

    • @stickslingers216
      @stickslingers216 5 лет назад

      Except you have to carry around 10' pvc pipes.
      Tgis way you only have small pieces that can store away easy

  • @noworriesmate8287
    @noworriesmate8287 5 лет назад +6

    I thinking the drawing in your head looks better then the drawing on paper? 😂 better cover the shock with floaty tube too🤔. Good job dude

    • @vondahartsock-oneil3343
      @vondahartsock-oneil3343 4 года назад

      I used those floaty tubes to cut to size, and then cut one side bottom to top and slip it over the bars on my 18ft Lowes canoe, so when I propped it onto the top of my trucks cabin, it wouldn't scratch it or wear the paint off. Those things are good for a lot more than a swimming pool!

  • @nicoferreira1426
    @nicoferreira1426 4 года назад

    Really great idea! Hope you realise that you are so lucky to have a nice lady who support you................))) Enjoy!

  • @briansmith5469
    @briansmith5469 5 лет назад +4

    Good diy build gonna make one this weekend.👍

  • @viktoriana7282
    @viktoriana7282 2 года назад

    Brilliant!! 👍🏼 loved how you clamped the tent to the pvc pipes.

  • @michaelzimmerman8959
    @michaelzimmerman8959 5 лет назад

    Looks really good, maybe consider strapping it down so high winds don't yank it off the bed of your truck, but all in all it's a good idea

  • @curlykori
    @curlykori 5 лет назад +1

    Love the affordable fun ideas.

  • @SandTguy
    @SandTguy 5 лет назад

    Man that is borderline Genius.

  • @l.horseman5704
    @l.horseman5704 5 лет назад +1

    VERY INTERESTING!! GOOD THINKING! BY GEORGE I THINK YOU'VE GOT IT!!!

  • @D.E94
    @D.E94 5 лет назад

    This is a cool idea, let' go camping

  • @ScottReiboldt
    @ScottReiboldt 3 года назад

    That's awesome, I will try this but will need to figure out a door and hook a strap to the tailgate, so I can pull it closed easier from the inside.

  • @FLSTN1
    @FLSTN1 5 лет назад +11

    Grate video and superb idea, I'm definitely getting one done.
    By the way love that shirt bro..viva México !!

  • @michellegrooms4965
    @michellegrooms4965 5 лет назад +2

    That was awesome? I like what you did? It's made with love? Keep doing amazing things?

  • @curtdavis4002
    @curtdavis4002 5 месяцев назад

    Nice job! Glad to see these projects.

  • @jasoncox2606
    @jasoncox2606 5 лет назад +1

    That's very cool. Let's go camping!