Mazda CX-7 Headlight Replacement - Easy Guide For Replacing Your Blown Bulb
HTML-код
- Опубликовано: 25 авг 2024
- If this video was helpful, consider donating :)
Paypal - paypal.me/chad...
Cash App - cash.app/$chad...
Venmo - www.venmo.com/...
Link to product in this video:
H7 Headlight Bulbs - amzn.to/2U7G3vs
In this video, I show you how to replace the headlight bulb on a Mazda CX-7.
Bulb needed: H7
Tools Needed: Small pry tool
If this video was helpful, consider donating :)
Paypal - paypal.me/chadwilliams89
Cash App - cash.app/$chadwilliamsfixesall
Venmo - www.venmo.com/u/chadwilliams06
Dude thank you. After a few outrageous quotes i decided to give it a try. I build furniture cannot work on a car. 15 min both lights the metal clasp was my biggest obstacle. Listen the only reason im commenting is i flat out could not afford a mechanic to do it nor could i afford a ticket. You saved a stranger and im sure im not the only one. You sir Rock !
Glad to help! I remember the first time I did this too, that darn clasp got the best of me. But now, after like 6 times of doing it, I can tackle that clasp in a minute lol
Anyways, glad I could help!
F*cking rip off artists charging you an arm and leg for a relatively quick and simple bulb change, even if they mess with a clasp for 15 minutes
Yeshua Hamashiach is God in the flesh, the Son of God, the Word of God, and he died so that you may be presented blameless in the sight of the Father. And so you may inherit his kingdom. The LORD Yeshua Hamashiach is the only way to the Father and his kingdom. Repent of your sins accept him into your life as your LORD and Savior before it's too late, every day is not guaranteed.
John 14:6
Jesus said to him, “I am the way, and the truth, and the life; no one comes to the Father except through Me.
May God bless you all.
Every aspect of this car's design made me want to slap the whole engineering team
You and me both! I am glad my mother in law got rid of this car finally lol
@@ChadWilliamsFixesAll tltttrrttttrtttttrrrrrttrrrrrrtrrrrrrrrtrrrrrrrrrtrrllylyylu
@@ChadWilliamsFixesAll That's funny because my mil gave us her low mileage Cx7. 😂 Thanks for this walk thru! 👍
FACTS
I picked one up cheap after my financed 2017 TLX gotten written off…I was enjoying it till I started replacing lights 😂 my one rear side marker socket will not fucking come out no matter how hard I pull. Can hear it unlock and everything as well
This video was so helpful. I'm a 60 yr old woman and was able to replace the bulb myself. These bulbs go out quite often and have been paying $99 every time I took it to the dealership. I only paid $23 for the bulb and it took me roughly 45 min start to finish to replace the bulb myself. I was able to replace it from under the hood instead of going through the wheel well. Thank you for your helpful video!😁
Really thank God I was hoping there was a way to do it inside of the hood lol
Yes small hands preferably will work
Update: I was able to replace my headlight the second time around much more easily thanks to your video. No loosening that screw this time. Seeing how that gate worked was key. It took a LOT of pressure to unclip that thing on mine ... using a glove made it less painful. To clarify even more for those first-timers: you need to push in (toward the front of the car) very firmly and then down to unlatch it. And the lower half of the clip is the only one that latches ... no need to worry about pushing anything on the upper part of the clip. Also, I'd replace both bulbs at the same time. I only replaced one and then the other one went out shortly after that and then my new one blew again. So I ended up replacing my driver side twice in about a month. I never worried much about keeping headlights as a "matched set" but I think I'll try to do that from now on.
Thanks for the tip about moving the clip down when pushing in!
That’s what I did…but because it’s old the damn housing broke. Couple of zip ties and I rigged it, but gonna have to replace the entire light at some point.
Great video! Love how you explain the smallest details. I am 62 1/2, and I try and maintain my vehicle as much as I can on my own. Very simple directions, thank you!
For those who went to LED like I did for my mom’s car to avoid changing you can remove the circle clip around the low beam and put it in and shut the door clip and put the light back in the circle clip and lock it back. Lot of research time in this trick.
Hi, whats type/model of LED for low beam you went with? H7 or 9005? appreciate the exact purchase link if any. Spent about 3 hours and couldnt find one LED that fits to replace my halogen.. many thanks
Instructions for metal clip - hardest part.
Take the mudguard off partially - my cx7 had little metal push pins you can lever with Flathead screwdriver.
Reach in, unplug cable by pulling straight back, remove rubber dust cover.
On bottom left part of clip, push hard towards front of car and down. It will unclip.
Replace bulb.
To put clip back on, stand over engine bay. Squeeze hand past fuse box on LHS (take lid off), grab clip and firmly push in and slightly down on bottom bit.
The key is the bit at the bottom - opposite where it hinges. This is where the catch is.
You definitely saved me, guy said he would charge me 150 to do it, I brought it and found you video and wallllaaaa! Thank you do damn much, you helped another stranger out on this side big time
Love hearing comments like this! Nice to save a few dollars. :) thanks for watching!
Great video! I’ve been a happy CX-7 owner for many years...except when the headlight(s) burn out. Then I get angry. I know how to do it now but it’s infuriating how difficult they made it.
I was told that Ford designed the headlights. Terrible design!
Thank you. I just changed both of mine. On the right side you can go in from the top but the wire is so short.
Most helpful video I've seen on this so far. Thanks.
I just did the one on my wife's CX-7. If you have a good jack and an impact wrench and you can take the tire/wheel off easily, do that as well. I'd say it gives you 40% more elbow room.
Thank you so much. Just changed the globe myself. Mechanic was going to charge me $120
Excellent close up of the clip
Thank you! Glad I could help!
Thanks a lot! Easily explained! I am not a mechanic oriented, but trying to save some money...thanks again! Had to subscribe!!!
Thanks for the sub! I hope you got it all fixed! I hated replacing those lights, but you get pretty good at it when I had to do it a few times a winter. lol
Nice and better way than a fellow who showed how to take the bumper off to remove the assembly to change the bulb!
with the help of your video i was able to change the headlight in like under 10 minutes. Thanks!
Thanks Chad. Without this video I would have never been able to replace that bulb. You would think the Mazda engineers would be able to make this much easier.
You are very welcome!!! Glad I could help. And yes, this is an awful design.
Just got done with a successful bulb replacement thanks to your great video. Thank you!
Thank you so much for your video. Took me awhile to get the metal clip open but it finally worked, was able to replace the lightbulb on my CX7 now. 👍
Thanks for this handy How-to video. It's going to make my bulb replacement a lot easier.
You are very welcome! Thanks for watching!!!
Big thanks for the video!! That clip is insane to reattach. My fingers were NUMB when I finished. My drivers low beam goes out about every 4 months so next time I'm switching to LED and we'll see if they last longer.
Sniff..three years in "Da UP"..I love the smell of road salt in the morning, hehe..great vid!
Lol! Ahhh, road salt is amazing, said no car ever :) thanks for the watch! Glad it helped
@@ChadWilliamsFixesAll Indeed..I still remember the car wash at my old base, with the sprayers all on the ground, to spray up! Clever...
Almost paid 170.00 at the dealer just to change a lightbulb. Thanks to your video I was able to change it for just the price of the bulb. You rock
WOW!! That is how much they are charging for this replacement?!?!?! So glad I could help! Thank you for watching!
That's what Mazda's service department quoted me.
Great job on the video, excellent directions and clarity. Appreciate that you took the time!
Thank you for this video! That metal clip was a b*tch. Gloves were suggested below, which I would try next time. My tender ladylike fingers were aching, trying to push the clip back into place. I ended up using a butter knife to push it. 😆
This was so helpful! Saved me money and a trip to the mechanic!
I love my CX-7 but what a pain to change headlight and they go out so frequently. Your video is very helpful. Thanks.
It is such a pain. I have done it so much on this CX-7, that I can change the bulb out in 3 minutes flat LOL. I don't know if that is a good or a bad thing.
i just did a coworkers headlights from the hood space, did it in like 20 mins no problems.( same car btw)
Nice video. I couldn't get that stupid hinge to release when I did mine and ended up loosening the little Phillips screw that actually holds the gate in place (on the other side of the clip than you released in the vid). I wanted to make sure that I didn't break it as others have mentioned and luckily, that worked. The whole clip just comes off that way. However, it's a beast to get back into place again, given the limited area to work with your hands while still trying to see it. Just a really lousy design.
I did the exact same thing the first time I did my headlight change. Easy to get that screw out, but a pain to get it back in with the hinge. Very stupid design but glad you got yours done too! Thank you for watching!
Tysm for the easy to follow instruction video! You helped my friends and I change one of their car’s headlights 😁
You're welcome! These headlights are so annoying to replace the first time. Glad it was made easier :)
This video helped me perfectly!! Changed my own headlight!! Thank you so much for your videos!!!
You're welcome! Way cheaper than going to the dealership :)
Cheers for the video help a lot. Been scratching my head for the last week.
OMG thank you so much I can't believe I watched so many videos just to get to yours!!! Do you have the best content thank you so much keep up the good work my friend greatly appreciated
Thank you so much! Glad I was able to help! :)
Just wanted to say thank you for this!
You’re welcome! :)
Thanks for this video! My only critique is that maybe you should make sure the bulb is working before you replace the fender well. I had a bad bulb and had to do it again. Your video has a good visual quality, you're easy to understand, and you have a good demeanor. Thanks again
Can't disagree with you there! Thank you for watching and commenting!
Thank you for the video, has shown me what to expect and most importantly how to do it. Thanks once again...
You are very welcome! Thank you for watching!!
Thank you for this video. Could Mazda (and other carmakers) make it so much easier to change this bulb? Of course, but then there's no chance anyone pays them a premium to do it. Absolutely ridiculous what's involved in a simple lightbulb change. But I did it thanks to this walkthrough. And like most others, the metal clasp was the most painful part.
Great video, helped me out a lot mate.
Just brilliant tuition. Thank you very much
Great video and very easy to follow. Got me out of a bind and saved me a heap of $$$ that Mazda were going to charge me. Thank you so much - very much appreciate that you shared this online.
Thank you for the tutorial, i feel that the guy who design the Mazda hates humanity.
Love this video, it is very well done. Wanted to ask though, those Phillips bulbs are H7 which is correct but they are Hologen, not Xenon Fusion (HID) like the originals. Did they still work without any issues and how long did they last you? Thx
Thank you
Second time I change the light 😊
Thanks so much for the video. I myself as a woman know how to change the headlights without asking for any help
Thanks for watching and glad it helped!
thank you, please advise if you can clean the lamp from inside, it is getting foggy with time and I believe that the front lamps are sealed, any ideas? thanks a lot!
Yoo thank you made the job easier :)
You're welcome! Glad to help! Thanks for watching!
It took me 5 minutes to pull out the passenger side bulb thanks to this video. I had to use my thumb to put enough pressure on the gate for it to release but it came out relatively easily. Drivers side is a tighter fit but I think I can squeeze my hand in there without going through the wheel well. Great video and camera angles, yours is about the best on YT.
Thank you so much for that great comment. Glad I was able help :)
curious, since you shot the video from the topside/hood, could you just access the bulb from there? I've changed my passenger side on a Mazda 5 and 626 before that from the topside with no issue. Is there enough clearance to access from the hood side?
Thank you
So mine doesn't have those adapter plates, just ordered them tonight. Maybe that's why they are fitting wrong.
So glad we’re getting rid of this car today. It’s been a good dependable car but I’ve probably put at least 15 headlight bulbs in it . I’m SO done with that !
I’m here ready to scream and thanks to you I won’t ever have to do it again.
Thanks a lot !!! From France 👍👍👍
Nice. Thank you. I broke the locking pin off though and couldn't figure out how to put it back in. Hopefully it'll stay without it
Bummer you broke the locking pin. I agree, hopefully it stays without it! Thanks for watching!
I broke mine too replacing the headlight. That boot has held the bulb in place for 4+ years now no issues. I HATE THAT SPRING DESIGN!
This video help me. Was very hard to get the old bulb out. And with the new one I couldnt get the clip on. Was wondering if the old bulb had some kind of glue on it? Had to just put it back with the rubber housing on and not the clip. Hopefully it holds!
No glue is used. That clip is a giant pain. You could probably get away with just holding it with the rubber for a while, but may cause a premature life on the bulb. Thanks for watching!
Best video for this. Hands down. Tyvm sir.
I want to add that if you did touch the new bulb with your skin, you want to remove the aforementioned oils with some alcohol and a tissue. Alcohol dissolves oils, so just before installation, do clean the bulb with alcohol. I did so twice and my bulbs are in a good shape :)
ye, the most pain is that wire that locks the bulb in its place. Annoying to operate. After you get it, however, it's a lot easier. Mazda's manual describes the mechanism but extremely poorly. It's like they actually want drivers to pay ridiculous money in the dealerships to do the trick. Anyhow. Thanks, great vid.
Great video just a question for you or anyone else I just changed my headlight bulbs now a month later the headlights are very dim is there a reason why this would be happening
Helpful thanks God bless you
Like the video
You’re welcome!!! Glad it could help!
Great video! Now I can tackle the wife's car as soon as it's warmer. Question, how hard is it to do the high beams? 🤔
This was pretty useful. Thank you.
Thanks for the video. I saw some HID wires, why you are using halogens? its difficult to use LED or HID?
Can u do one for the 2 front marker light.
Excelente trabajo. Muchas gracias
How to replace the controller and ballast for the headlight on 2010 mazda cx 7?
Thanks for sharing, nothing is easy on the cx-7. Has to be one of the worst cars to work on I have come across.
You are a life saver!!
Thanks!!! :)
Was helpful
Same problems as most getting the clip back on. I ended up notching the end of a flat screwdriver and then bent it 45 degrees and two seconds later the clip was on.
Thanks for this video really help me out 👍
Can I buy an halogen lights and just replaced the old regular headlights or I need to buy the whole kit lamps?
Thanks for your help! :)
Bro thank you so much 👍🏽👍🏽👍🏽
What type of bulb does the Mazda use ?
There are other videos that show that clip action better. In words, press the rounded loop part of the clip down towards the light housing, towards the front of the car. Once this is done the clip clears the hook into which the clip hooks. So while continuing to press on this clip push the clip towards the ring of the light housing. The clip and light etc is in a ring of plastic. So while pushing the clip down as explained earlier push it toward the inner circumference of the ring in which it all resides. Then the clip will be free of the hook and should then swing free of the housing as on a hinge and allow the bulb to be removed. After putting in new bulb properly swing clip back in place, press in (towards front of car) and this time then press towards inside of circle. The clip should find the little latch hook and it should stay in place. All this would easily be done if you could see it all better for sure. Don’t use a tool to help you do this. You could easily break the plastic clip housing.
Thanks
You're welcome!
Thank you for this video!
Thank you.
What a stupid design. One shouldn't have to go through all that only to change a bulb.
They do that so you have to take it in and spend money.
Agreed I have a 2010 cx7 and changed both low beam bulbs yeah what a stupid design
Would I have to go through all this trouble for the passenger side bulb? Currently need to replace it.
Yes you would. :(
Yes it's the same but in reverse.
I’m in Australia and have a 2010 CX7 that also only ever blows the left side headlamp, no idea why and only ever changed the right side to match the new bulb. Good video and informative, I always wondered about the orientation of the base and the bulb, good to know I’ve been doing it the right way.
Of course, there is an orientation....otherwise it will not go back into the slot ....😅
Chad, everything seemed pretty tight in there..Unless you drive on constantly bumpy roads, I would think I will be alright. What do you think?
I earned 50 bucks cuz of this video
Thanks man
My drivers side has gone out several times also, any idea whats going on there?
I never figured it out :( only thing that ever helped was installing HID headlights. I ran them for like 2 years, never burned a bulb with them.
Is this just for low beams? What bulb for high beams?
I am pretty sure the low beams and high beams is one bulb, but I can't validate as we don't own the vehicle anymore :(
What they designed this so you have to take it to a garage.. omg.. i did do this 1st time just got this vehicle . It is a real pain. Then i find out the assembly on one of my lights where it clips to is broken. I just slid the sleeve on and stuck it in. Hopefully good enough.
The bulbs in my burn out so often. Worst car to change them in this constantly
Question, we replaced the lights a few years back and then discovered that they are angled outwards. How did this happen and how do I fix it?
You might now have put them in their slots. They have little prongs that go into slots. Double check that is the first thing I would do.
@@ChadWilliamsFixesAll thanks for the quick response, ill give that a try.
@@ChadWilliamsFixesAll thanks for the quick response, ill give that a try.
This was a PAIN IN THE TUSHY! I was a bit irritated before I started. Your video helped with the irritation. The rest is gonna take cream. Darn there hides for designing such system.
very helpful video :-))
Thank you sir
I had a hard time with the clip thingy and broke the silver frame below it while tryingto unclip it...
Oh no, did you get it fixed at all?
@@ChadWilliamsFixesAll just placed it in there and cliped it and hoped for the best, it holds
I bet it will stay. That rubber boot will also help hold it in place.
thank you mazda for making headlight changing sensible
Unplugging it just added $, pulled half the bezel off just now.
Why is it always the driver side that is blown 😊
Thanx for the information. I got it done but it wasn't easy. What a horrible design. I think they make it complicated on purpose so you give up and take it to a dealer.
You are welcome! From what I heard, it can cost around $150 to do a headlight change on these vehicles. Absolutely crazy! Glad you got it done though!
Good video but next time I have to change those bulbs I won't need an instructional video, just a sledge hammer... to release all the stress, you know?!
Stupid design from hell Mazda !!!
Absolutely the worst design, had to do this twice (per side) in like 4 years band is a real nightmare especially the first time you do it. I feel a rubber glove is a must to avoid a dirty scraped up hand.