Thank you thank you thank you I was gonna buy one of these bikes years back ago didn’t do it I just had a hunch that it was not good and with your video just found out what I felt …. For you knowledge and wisdom on bikes blessed be God … he has given you guys those virtues and talents and may God continue to bless you guys for sharing and helping others …..😊
Your community and region is so lucky to have your talents and shop of your caliber available. As I have learned over the many months watching your channel, a bike is not a bike is not a bike. There is so much unsafe junk out there that can get a kid or adult badly hurt on. I grew up with a father that could re spoke and align wheels and build bikes from scratch so I have more knowledge than some but certainly nothing compared to yours. A bike is a vehicle that oftentimes is exposed to vehicular traffic and challenging riding conditions. I believe its important to buy a bike from a professional such as yourself or if you purchase a bike from somewhere else or get one as a present, take it to a professional shop and pay for some piece of mind and have it checked out and properly adjusted. It could just save your neck. In the old days, most bikes were US made and made with pride and were generally of excellent quality, today I am not so sure. Keep up the great work, and your videos are greatly appreciated... With great respect... Joe
I bought similar model but from Vevor of the MTB Forks and foldable frame. I converted into an ETrike and need to fyi, once you put a motor on a TRIKE, its no longer for Sr.s or older folks as you become more like Evil Kinevil . The physics is different from 2 wheelers and no sharp turns as you have to slow down almost or complete stop when turning. You only have about 3 to 4 inches from each turn swivel and you need to always counter balance the Trike when turning of a more boxed in like feeling. It peddles great but once a motor is in, you can not just speed away and at constant mind of being alert of the balancing when over rough terrain as its very easy to sway depending on angle and pavement ,. Never ride on sidewalks, the driveway entry points will make Trike lean and you have to steer to get balance or you will coast to either side of needing to control direction. Its a challenge on E Trikes of balancing as ALL TRIKES are Stage Coaches without the horse as lead. Overall the E Trike I build is part of my collection of my E Bike Life. Oh, I took side fenders out due to constant adjusting from rattling next to basket. Just better without them.
How do you think the amazon recmor would do with a 79cc phatmoto bike engine? I am 73 and my phatmoto rover is my only transportation. I am asking you because I value your opinion. Tgank you and keep up the great videos and the truth❤
Thank you for your rreply on the possibility of putting a Lipan 3 horse. On the three wheeled bike. Have to wait for tools and stuff retirrment is rough.Bless you and keep up the great work and videos. 😂
Thanks for the video. But to me $189 and bicycle or tricycle just does not add up. $200 doesn't buy anything these days and people should know this if I were you I would not have taken the job. I hope lesson learned. Hope you all had a good weekend.
Thank you. I haven't learned my lesson. If I refuse to build bikes and trikes for people that bought them from online I won't have enough income to pay the bills. More and more people are buying online. It just seems to be the way things are going today. If I have another one like that I may have to just up the price on certain ones. At least I have evidence on how much of a pain in the backside they can be.👍
@@frankenz66 I'm sorry but I'm not surprised. But the nice thing is you have a chance to upgrade the bearings and it should solve that problem but you may continue to have other problems. Now is the time to decide if your better off buying a better trike..... I say you may want to really consider this option. It is not a pleasant thought but if your going to continue to ride then your better off. Goodluck with your decision.👍
Trikes are evil. they also ride horribly on anything not flat and smooth. I had to make mine posi rear otherwise on any terrain it would just drive in circles.. Welded it solid
These bikes are trash! Got one for my mum to ride with us. Besides all the parts being cheap soft metal. The power transfer from the pedal to the rear wheels was pretty much dependant on one screww on a flattened part of the axel. Once that strips your up a creek. You can mod it if your savvy enougn, but thats only going tk buy you time before it cant hold it anymore. Sold that bike, got my mum a Sun - Adult Trike. It was $$$ but the quality and dependability to have ny old mum on it is worth every penny.
Thank you thank you thank you I was gonna buy one of these bikes years back ago didn’t do it I just had a hunch that it was not good and with your video just found out what I felt …. For you knowledge and wisdom on bikes blessed be God … he has given you guys those virtues and talents and may God continue to bless you guys for sharing and helping others …..😊
Your community and region is so lucky to have your talents and shop of your caliber available. As I have learned over the many months watching your channel, a bike is not a bike is not a bike. There is so much unsafe junk out there that can get a kid or adult badly hurt on. I grew up with a father that could re spoke and align wheels and build bikes from scratch so I have more knowledge than some but certainly nothing compared to yours. A bike is a vehicle that oftentimes is exposed to vehicular traffic and challenging riding conditions. I believe its important to buy a bike from a professional such as yourself or if you purchase a bike from somewhere else or get one as a present, take it to a professional shop and pay for some piece of mind and have it checked out and properly adjusted. It could just save your neck. In the old days, most bikes were US made and made with pride and were generally of excellent quality, today I am not so sure.
Keep up the great work, and your videos are greatly appreciated... With great respect... Joe
Thank you Joe. I really appreciate your comments.👍
I bought similar model but from Vevor of the MTB Forks and foldable frame. I converted into an ETrike and need to fyi, once you put a motor on a TRIKE, its no longer for Sr.s or older folks as you become more like Evil Kinevil . The physics is different from 2 wheelers and no sharp turns as you have to slow down almost or complete stop when turning. You only have about 3 to 4 inches from each turn swivel and you need to always counter balance the Trike when turning of a more boxed in like feeling. It peddles great but once a motor is in, you can not just speed away and at constant mind of being alert of the balancing when over rough terrain as its very easy to sway depending on angle and pavement ,. Never ride on sidewalks, the driveway entry points will make Trike lean and you have to steer to get balance or you will coast to either side of needing to control direction. Its a challenge on E Trikes of balancing as ALL TRIKES are Stage Coaches without the horse as lead. Overall the E Trike I build is part of my collection of my E Bike Life. Oh, I took side fenders out due to constant adjusting from rattling next to basket. Just better without them.
224$ total cost
Thanks for sharing.👍
I was serious looking and was going to buy it. I'm so glad I saw this video before I did!
Glad you found it 👍
How do you think the amazon recmor would do with a 79cc phatmoto bike engine? I am 73 and my phatmoto rover is my only transportation. I am asking you because I value your opinion. Tgank you and keep up the great videos and the truth❤
That's right good information thank you 👍
Your welcome.👍
Thank you for your rreply on the possibility of putting a Lipan 3 horse. On the three wheeled bike. Have to wait for tools and stuff retirrment is rough.Bless you and keep up the great work and videos. 😂
Just try to keep it under 55mph and wear a helmet.🖖
@@alloutbikes yes thank you. For that and akways keep up the great work with good old fashioned Quality!
I do have to say you are a professional and you aim to please.
Thank you.👍
Thanks for the video. But to me $189 and bicycle or tricycle just does not add up. $200 doesn't buy anything these days and people should know this if I were you I would not have taken the job. I hope lesson learned. Hope you all had a good weekend.
Thank you. I haven't learned my lesson. If I refuse to build bikes and trikes for people that bought them from online I won't have enough income to pay the bills. More and more people are buying online. It just seems to be the way things are going today. If I have another one like that I may have to just up the price on certain ones. At least I have evidence on how much of a pain in the backside they can be.👍
I about never got the tires to stay inflated. Now the peddling assembly ( parts popped off it) is down only had it since June for my younger daughter.
Sorry your having trouble with it. Goodluck.👍
@@alloutbikes bearing popped out it.
@@frankenz66 I'm sorry but I'm not surprised. But the nice thing is you have a chance to upgrade the bearings and it should solve that problem but you may continue to have other problems. Now is the time to decide if your better off buying a better trike..... I say you may want to really consider this option. It is not a pleasant thought but if your going to continue to ride then your better off. Goodluck with your decision.👍
@@alloutbikes Not exactly the easiest things to get off that was for sure.
Hey guys🤙 class is in session 😎👍
it would be cool to see your bike assemblies in real time.
yes I can do it for at price
i feel like you're almost related to the guy on cars and cameras. yall sure you are not twins separated at birth or something?
That's my bro.👍
That front basket will fold with a letter in it! And what's going on with the rear mudguards? Their all over the place!
Three words. Cheap..Cheap....Cheap.
Trikes are evil. they also ride horribly on anything not flat and smooth. I had to make mine posi rear otherwise on any terrain it would just drive in circles.. Welded it solid
you want a tadpole trike (two wheels in front) for stability. delta (two wheels behind) are terrible for anything above normal bike cruising speeds
These bikes are trash! Got one for my mum to ride with us. Besides all the parts being cheap soft metal. The power transfer from the pedal to the rear wheels was pretty much dependant on one screww on a flattened part of the axel. Once that strips your up a creek. You can mod it if your savvy enougn, but thats only going tk buy you time before it cant hold it anymore. Sold that bike, got my mum a Sun - Adult Trike. It was $$$ but the quality and dependability to have ny old mum on it is worth every penny.
I absolutely agree. There are a couple of other brands that are as good or better but none are cheaper then the Sun. They are the same price or more.
[Engwe M20]