Just putting some Carb Cleanner into this PT. It's no the right way according to the expert Guys out there. But after doing so i started looking some improvement
I changed my fuel filter and made a huge difference.Trace all vacuum lines as well.Be sure no leak.Great video I am doing away with factory carb and have a 32/36 Weber Chinese carb.We did my friends truck a week ago’and man runs great!
I realize this is an old video, but for anyone with one of these little trucks: SHIT CAN the factory carb. It is a cluster F#$% to say the least. Get the aftermarket Weber& remove all the vacuum & electrical garbage on the passengers side fender. Pull the ECM from under the passengers side kick panel along with all its associated wiring & throw it in the trash. My '93 B22 has 251k miles on it. The Weber carb has been 100% trouble free & the reliability rivals that of modern fuel injection.
papabugs71 A little help here please, I just got my first B2200 94 and really liking it, the engine is running smooth and I'm not really after performance here, but IF I install the Weber carb will it help with fuel economy as well? is there any other improvements to help with fuel economy? My truck runs about 9.5Kms per litre (10.5L per 100Km), does it sound right? Thanks.
Leandro Brocco oh yeah bro weber is the best decition your engine will run smooth, sorry for been late what happen is i was trying to write back but you tube don't allow me. now i can replay, so yeah man go ahead and get a weber, good luck
Is it possible to buy an entire carburetor for the b2200 from weber or is it a kit to rebuild the current one? I really would like to avoid a rebuild if possible, I have no idea how to do it
Que tal, una pregunta, la manguera que está en la tapa del motor junto a la tapa por donde se aplica el aceite de motor hacia donde va dirigida? Gracias Saludos
Hey i have a stock factory mazda b220 the hoses hooked to the bottom of my air breather box i noticed this guy didnt have any hooked up is it ok if i disconnect the hoses from it?
Buen video.pero le pregunto para eliminar el sistema de gases que mangas se le elimina al carburador si m puede contestar O una foto de tu carburador gracias
Franky , tengo un Mazda B 2200 , del año 90 . Me le cambiaron el carburador original y a veces da un tipo de contraexplosiones como a 2000 rpm , si no consigo uno original , cuál me aconsejaría para adaptarlo , gracias le escribo desde Costa Rica .
Underneath the carburetor is a manifold or something intake manifold how do I get a hold of one of those from my 89 Mazda it's my truck is old and they say the dealers have discontinue that stuff how much are they and where do I find one
+7caesar7 is it a new carb altogether? Where can I find one? My truck was run without an air filter for who know how long, it pops and sputters all the time. I ran some sea foam through the vacuum, gas tank, and carb to clean it and it doesn't see to have helped
Michael Ray yup yup the best is to get a weber for your truck on E bay sometime you get good deal if not go to redline.com may you get it diretly from the factory hope this help!!?
I will like know how to eliminate the vacuum lines wth out replacing the carb, just been having problems with the carb and vacuum lines. I will like to take them off my is a 91 b2200
Jerry Galvan Hey Jerry is easy, just take out and put the Bolt to lock all open holes... Bingo!! I were you and get a Weber, they are way Better than stock carb!!!
@@7caesar7 yea I've been wanting to do that, ever since I started having problems with the carb, the truck is been hesitate when it gets to 70mpr yerks, Automating Trams
I changed my fuel filter and made a huge difference.Trace all vacuum lines as well.Be sure no leak.Great video I am doing away with factory carb and have a 32/36 Weber Chinese carb.We did my friends truck a week ago’and man runs great!
Nice Job C. those are the things I like to do in order to obtain a smoth ride.
I realize this is an old video, but for anyone with one of these little trucks: SHIT CAN the factory carb. It is a cluster F#$% to say the least. Get the aftermarket Weber& remove all the vacuum & electrical garbage on the passengers side fender. Pull the ECM from under the passengers side kick panel along with all its associated wiring & throw it in the trash. My '93 B22 has 251k miles on it. The Weber carb has been 100% trouble free & the reliability rivals that of modern fuel injection.
papabugs71
A little help here please, I just got my first B2200 94 and really liking it, the engine is running smooth and I'm not really after performance here, but IF I install the Weber carb will it help with fuel economy as well? is there any other improvements to help with fuel economy? My truck runs about 9.5Kms per litre (10.5L per 100Km), does it sound right? Thanks.
Leandro Brocco oh yeah bro weber is the best decition your engine will run smooth, sorry for been late what happen is i was trying to write back but you tube don't allow me. now i can replay, so yeah man go ahead and get a weber, good luck
Thanks bro... will find one..
Is it possible to buy an entire carburetor for the b2200 from weber or is it a kit to rebuild the current one? I really would like to avoid a rebuild if possible, I have no idea how to do it
As I understood from other videos it is a replacement with a easy modification on the mounting holes on the weber to fit in place...not a rebuilt.
Esbueno ver los vídeos yo tengo una y gual
Que tal, una pregunta, la manguera que está en la tapa del motor junto a la tapa por donde se aplica el aceite de motor hacia donde va dirigida? Gracias Saludos
how do you replace the mixture control solinod on madza pick up b2200 2.0 carb.@were is it located. wont pass smog and no replacment carb avaible
@MrControlall u could try adjusting your idle mixture and idle speed. But sence its been 5 months you have probley fixed the problem by now.
Qué carburador es el del mazda y que modelo es
I need help my carb is flooding.
Hey i have a stock factory mazda b220 the hoses hooked to the bottom of my air breather box i noticed this guy didnt have any hooked up is it ok if i disconnect the hoses from it?
I meant 89 b2200
Cada k tiempo se recomienda limpiar el carburador?
Thank u my Brotha!!!!!
Nothing that a little "Sea Foam" won't take care of.
Buen video.pero le pregunto para eliminar el sistema de gases que mangas se le elimina al carburador si m puede contestar O una foto de tu carburador gracias
i have a question that when u do this is it posible the dirt may inter to the engien
Cesar tendrás un video de cómo quitar todas las mangas del carburador y dejarlo como el que veo en tu Mazda ten una igual quiero hacer este proyecto
Did the engine stop shaking because you cleaned the carb out?
Franky , tengo un Mazda B 2200 , del año 90 . Me le cambiaron el carburador original y a veces da un tipo de contraexplosiones como a 2000 rpm , si no consigo uno original , cuál me aconsejaría para adaptarlo , gracias le escribo desde Costa Rica .
@@mariogerardodiazbarrantes3689 yo al de mi tata le monte j15 de datsun eso si nuevo vale 100mil pero vale la pena jala bien y bajo consumo
Me podrían desir como van todas las piezas ketiene donde se conecta el chicote del aselerador seme des armó todas esas piesas
Underneath the carburetor is a manifold or something intake manifold how do I get a hold of one of those from my 89 Mazda it's my truck is old and they say the dealers have discontinue that stuff how much are they and where do I find one
The intake you’ll have to go to a junk yard or find a truck that’s being sold for parts
What is the name of that can spray
In need for a set of lifters, hearing the clicking sound will vanish.
+7caesar7 is it a new carb altogether? Where can I find one? My truck was run without an air filter for who know how long, it pops and sputters all the time. I ran some sea foam through the vacuum, gas tank, and carb to clean it and it doesn't see to have helped
Michael Ray yup yup the best is to get a weber for your truck on E bay sometime you get good deal if not go to redline.com may you get it diretly from the factory hope this help!!?
Do I need to use the whole can the first time I clean it?
Una consulta porque razon pasa mucha gas del mio
I will like know how to eliminate the vacuum lines wth out replacing the carb, just been having problems with the carb and vacuum lines. I will like to take them off my is a 91 b2200
Jerry Galvan Hey Jerry is easy, just take out and put the Bolt to lock all open holes... Bingo!!
I were you and get a Weber, they are way Better than stock carb!!!
@@7caesar7 yea I've been wanting to do that, ever since I started having problems with the carb, the truck is been hesitate when it gets to 70mpr yerks, Automating Trams
Thats not doing anything
Vídeos chafas hasta yo lo hago .... Algo que realmente enseñe gracias